Prostock62 Posted June 19, 2006 Posted June 19, 2006 DFI LANPARTY NF4 SLI-DR - 6/23/2005 BIOS AMD Opteron 146 CABYE 0540 FPAW G.Skill F1-4000USU2-2GBHZ 2 x 1024MB EVGA 6600GT 128MB, 84.21 drivers Hitachi Sata 11 80 Gig x 2 Raid 0 OCZ PowerStream OCZ520ADJ ATX 520W Power Supply - Retail Genie BIOS Settings: FSB Bus Frequency - 300 LDT/FSB Frequency Ratio - AUTO CPU/FSB Frequency Ratio - 10 PCI eXpress Frequency - 100Mhz CPU VID StartUp Value - 1.500v CPU VID Control - 1.350v CPU VID Special Control - Above VID * 123% LDT Voltage Control - 1.40v Chip Set Voltage Control - 1.60v DRAM Voltage Control - 2.80v DRAM Configuration Settings: DRAM Frequency Set - 166=RAM/FSB:05/06 Command Per Clock (CPC) - Enable CAS Latency Control (Tcl) - 3.0 RAS# to CAS# delay (Trcd) - 04 Bus Clocks Min RAS# active time (Tras) - 08 Bus Clocks Row precharge time (Trp) - 04 Bus Clocks Row Cycle time (Trc) - 07 Bus Clocks Row refresh cyc time (Trfc) - 16 Bus Clocks Row to Row delay (Trrd) - 02 Bus Clocks Write recovery time (Twr) - 02 Bus Clocks Write to Read delay (Twtr) - 02 Bus Clocks Read to Write delay (Trwt) - 03 Bus Clocks Refresh Period (Tref) - 3684 Cycles Write CAS Latency (Twcl) - 1 DRAM Bank Interleave - Enabled DQS Skew Control - Auto DQS Skew Value - 0 DRAM Drive Strength - Level 7 DRAM Data Drive Strength - Level 3 Max Async Latency - 9.0 Nano Seconds DRAM Response Time - Normal Read Preamble Time - 6.0 Nano Seconds IdleCycle Limit - 016 Cycles Dynamic Counter - Enabled R/W Queue Bypass - 16 x Bypass Max - 07 x 32 Byte Granularity - Disable(4 Bursts) Prime95,2001SE &CPUZ http://img207.imageshack.us/my.php?image=prime952dm.jpg 3dMark 2003 http://img122.imageshack.us/my.php?image=33bs.jpg 3dMark 2005 http://img122.imageshack.us/my.php?image=200527on.jpg 3dMark 2006 http://img214.imageshack.us/my.php?image=everest7td.jpg ========== short description: 300x10 @ 3000Mhz, 1.350v + 123% 3.0-4-8-4 @ 2.80v vdimm Share this post Link to post Share on other sites More sharing options...
Junfan Posted June 19, 2006 Posted June 19, 2006 DFI LANPARTY UT nF4 SLI-DR Expert (12/7/05A BIOS) AMD X2 4400+ dual core 2x1024MB Corsair XMS Pro TWINX2048-3200C2PRO XFX PV-T71F-YDF9 GeForce 7900 GTX, 665/1630 91.31 drivers 2x 74GB Raptor hdd (RAID 0) Plextor 16X DVD-RW OCZ Gamexstream 600w power supply * * ========== [b]Genie BIOS Settings:[/b] [color=red] FSB Bus Frequency............................. - 240 LDT/FSB Frequency Ratio....................... - x4 CPU/FSB Frequency Ratio....................... - x11 PCI eXpress Frequency......................... - 100Mhz CPU VID StartUp Value......................... - Startup CPU VID Control............................... - 1.350 CPU VID Special Control....................... - x 112.0% LDT Voltage Control........................... - 1.30v Chip Set Voltage Control...................... - 1.59v DRAM Voltage Control.......................... - 2.74v[/color] [b]DRAM Configuration Settings:[/b] [color=red] DRAM Frequency Set............................ - 200=RAM/FSB:01/01 Command Per Clock (CPC)....................... - Enable CAS Latency Control (Tcl)..................... - 2.5 RAS# to CAS# delay (Trcd)..................... - 3 Bus Clocks Min RAS# active time (Tras)................... - 6 Bus Clocks Row precharge time (Trp)...................... - 3 Bus Clocks Row Cycle time (Trc).......................... - 7 Bus Clocks Row refresh cyc time (Trfc)................... - Auto Row to Row delay (Trrd)....................... - 02 Bus Clocks Write recovery time (Twr)..................... - 02 Bus Clocks Write to Read delay (Twtr).................... - 02 Bus Clocks Read to Write delay (Trwt).................... - 03 Bus Clocks Refresh Period (Tref)......................... - 3120 Cycles DRAM Bank Interleave.......................... - Enabled DQS Skew Control.............................. - Auto DQS Skew Value................................ - 0 DRAM Drive Strength........................... - Auto DRAM Data Drive Strength...................... - Auto Max Async Latency............................. - Auto DRAM Response Time............................ - Fastest Read Preamble Time............................ - Auto IdleCycle Limit............................... - 256 Cycles Dynamic Counter............................... - Disable R/W Queue Bypass.............................. - 16 x Bypass Max.................................... - 07 x 32 Byte Granularity........................... - Disable(4 Bursts) [/color] ========== Prime95 + 3dMark2001SE + CPU-Z: http://i50.photobucket.com/albums/f345/jun.../toasty-240.jpg 3dMark2003: 3dMark2005: 3dMark 2006: Everest 2.80 Memory Read Test: ========== short description: 240x11 @ 2640Mhz, 1.35v + 112% 2.5-3-6-3 @ 2.74v vdimm Share this post Link to post Share on other sites More sharing options...
Guest Timmay Posted June 20, 2006 Posted June 20, 2006 DFI LANPARTY nF4 SLI-DR Expert AMD Opteron 144 2x1024MB Patriot DDR400 (PC3200LLK) MSI GeForce 7900GT, 450/660 84.21 drivers 2 X Seagate 80GB 7200.7 RAID 0 nF4 Controller LightOn DVDRW+- Silverstone ST60F 600W Power Supply * * ========== [b]Genie BIOS Settings:[/b] [color=red] FSB Bus Frequency............................. - 336 LDT/FSB Frequency Ratio....................... - 3.0 CPU/FSB Frequency Ratio....................... - 9.0 PCI eXpress Frequency......................... - 100Mhz CPU VID StartUp Value......................... - StartUp Value CPU VID Control............................... - 1.350 CPU VID Special Control....................... - 107.2% LDT Voltage Control........................... - 1.30v Chip Set Voltage Control...................... - 1.52v DRAM Voltage Control.......................... - 2.71v[/color] [b]DRAM Configuration Settings:[/b] [color=red] DRAM Frequency Set............................ - 120=RAM/FSB:03/05 Command Per Clock (CPC)....................... - Enable CAS Latency Control (Tcl)..................... - 2.5 RAS# to CAS# delay (Trcd)..................... - 3 Min RAS# active time (Tras)................... - 5 Row precharge time (Trp)...................... - 2 Row Cycle time (Trc).......................... - 7 Bus Clocks Row refresh cyc time (Trfc)................... - 17 Bus Clocks Row to Row delay (Trrd)....................... - 02 Bus Clocks Write recovery time (Twr)..................... - 02 Bus Clocks Write to Read delay (Twtr).................... - 02 Bus Clocks Read to Write delay (Trwt).................... - 03 Bus Clocks Refresh Period (Tref)......................... - 3120 Cycles DRAM Bank Interleave.......................... - Enabled DQS Skew Control.............................. - Auto DQS Skew Value................................ - 0 DRAM Drive Strength........................... - Auto DRAM Data Drive Strength...................... - Auto Max Async Latency............................. - Auto DRAM Response Time............................ - Fast Read Preamble Time............................ - 5.5 nano IdleCycle Limit............................... - 256 Cycles Dynamic Counter............................... - Disable R/W Queue Bypass.............................. - 16 x Bypass Max.................................... - 07 x 32 Byte Granularity........................... - Disable(4 Bursts) [/color] ========== Prime95 + 3dMark2001SE + CPU-Z EVEREST Home Edition Memory Read + CPU-Z 3dMark2003: 3dMark2005: 3dMark 2006: ========== Short Description: 336 x 9 @ 3024Mhz, 1.350 x 107.2% 2.5-3-2-5 @ 2.71v vdimm Share this post Link to post Share on other sites More sharing options...
OldGuy Posted June 21, 2006 Posted June 21, 2006 DFI LANPARTY NF4 UT Ultra D (bios 406 official) AMD Opteron 146 Venus CABYE 0540 IHS Removed 2GB G.Skill F1-4000USU2-2GBHZ 2X1gb XFX GeForce 7900GTX, 665/1630 84.43 beta drivers 2 Western Digital 250gb RE WD2500YD SATA II Raid 0 OCZ 700w Gamexstream PSU Coolit Freezone CPU Cooler * * ========== [b]Genie BIOS Settings:[/b] [color=red] FSB Bus Frequency............................. - 300 LDT/FSB Frequency Ratio....................... - X3 CPU/FSB Frequency Ratio....................... - X10 PCI eXpress Frequency......................... - 100Mhz CPU VID StartUp Value......................... - Startup CPU VID Control............................... - 1.450v CPU VID Special Control....................... - 113% LDT Voltage Control........................... - 1.30v Chip Set Voltage Control...................... - 1.60v DRAM Voltage Control.......................... - 2.60v[/color] [b]DRAM Configuration Settings:[/b] [color=red] DRAM Frequency Set............................ - 166=RAM/FSB:05/06 Command Per Clock (CPC)....................... - Enable CAS Latency Control (Tcl)..................... - 3.0 RAS# to CAS# delay (Trcd)..................... - 4.0 Min RAS# active time (Tras)................... - 8.0 Row precharge time (Trp)...................... - 3.0 Row Cycle time (Trc).......................... - 12 Bus Clocks Row refresh cyc time (Trfc)................... - 16 Bus Clocks Row to Row delay (Trrd)....................... - 02 Bus Clocks Write recovery time (Twr)..................... - 02 Bus Clocks Write to Read delay (Twtr).................... - 02 Bus Clocks Read to Write delay (Trwt).................... - 03 Bus Clocks Refresh Period (Tref)......................... - 3120 Cycles DRAM Bank Interleave.......................... - Enabled DQS Skew Control.............................. - Auto DQS Skew Value................................ - 0 DRAM Drive Strength........................... - 8 DRAM Data Drive Strength...................... - 2 Max Async Latency............................. - 9.0ns DRAM Response Time............................ - Normal Read Preamble Time............................ - 6.0ns IdleCycle Limit............................... - 016 Cycles Dynamic Counter............................... - Disable R/W Queue Bypass.............................. - 16 x Bypass Max.................................... - 04 x 32 Byte Granularity........................... - Disable(4 Bursts) [/color] ========== Prime95 + 3dMark2001SE + CPU-Z + Everest 2.20: 3dMark2003: 3dMark2005: 3dMark 2006: Aquamark 3: ========== short description: 300x10 @ 3000Mhz, 1.450v x 113% cpu voltages 3-4-8-3 @ 2.60v vdimm Share this post Link to post Share on other sites More sharing options...
Junfan Posted June 21, 2006 Posted June 21, 2006 Here are the final numbers on my son's puter. DFI LANPARTY UT nF4 Ultra-D (04/06/06) AMD 3500+ Venice 2x1024MB Mushkin Black Extreme 3438 XFX PVT70FUND7 Geforce 7800GTX, 490/1300 91.31 drivers 200 Gig WD SATA 16 Megs Cache Benq 16X DVD-RW Thermaltake Butterfly 480 Watt power supply * * ========== [b]Genie BIOS Settings:[/b] [color=red] FSB Bus Frequency............................. - 247 LDT/FSB Frequency Ratio....................... - x4 CPU/FSB Frequency Ratio....................... - x11 PCI eXpress Frequency......................... - 100Mhz CPU VID StartUp Value......................... - 1.400 CPU VID Control............................... - 1.400 CPU VID Special Control....................... - x 113.0% LDT Voltage Control........................... - 1.20v Chip Set Voltage Control...................... - 1.50v DRAM Voltage Control.......................... - 2.70v[/color] [b]DRAM Configuration Settings:[/b] [color=red] DRAM Frequency Set............................ - 200=RAM/FSB:01/01 Command Per Clock (CPC)....................... - Enable CAS Latency Control (Tcl)..................... - 3 RAS# to CAS# delay (Trcd)..................... - 4 Bus Clocks Min RAS# active time (Tras)................... - 8 Bus Clocks Row precharge time (Trp)...................... - 3 Bus Clocks Row Cycle time (Trc).......................... - 7 Bus Clocks Row refresh cyc time (Trfc)................... - 14 Row to Row delay (Trrd)....................... - 02 Bus Clocks Write recovery time (Twr)..................... - 02 Bus Clocks Write to Read delay (Twtr).................... - 02 Bus Clocks Read to Write delay (Trwt).................... - 03 Bus Clocks Refresh Period (Tref)......................... - 3120 Cycles DRAM Bank Interleave.......................... - Enabled DQS Skew Control.............................. - Auto DQS Skew Value................................ - 0 DRAM Drive Strength........................... - Auto DRAM Data Drive Strength...................... - Auto Max Async Latency............................. - Auto DRAM Response Time............................ - Fastest Read Preamble Time............................ - Auto IdleCycle Limit............................... - 256 Cycles Dynamic Counter............................... - Disable R/W Queue Bypass.............................. - 16 x Bypass Max.................................... - 07 x 32 Byte Granularity........................... - Disable(4 Bursts) [/color] ========== Prime95 + 3dMark2001SE + CPU-Z: http://i50.photobucket.com/albums/f345/jun...rtoasty-247.jpg 3dMark2003: 3dMark2005: 3dMark 2006: Everest 2.80 Memory Read Test: ========== short description: 247x11 @ 2717Mhz, 1.40v + 113% 3-4-8-3 @ 2.70v vdimm Share this post Link to post Share on other sites More sharing options...
ReelFiles Posted June 24, 2006 Posted June 24, 2006 DFI LANPARTY nF4 SLI-DR (623-2 BIOS) AMD Opteron 170 CCBWE 0609 FPAW 2x512MB Corsair XMS PC4400 (4400C2.5) Rosewill GeForce 6600 256Mb SLI, 380/535 84.21 drivers 200GB Western Digital Caviar SE 7,200RPM SATA II Hard drive HL DT-ST DVD-ROM GDR8160B SilverStone Strider 600W SLI Power Supply ========== [b]Genie BIOS Settings:[/b] [color=red] FSB Bus Frequency............................. - 275 LDT/FSB Frequency Ratio....................... - Auto CPU/FSB Frequency Ratio....................... - 10 PCI eXpress Frequency......................... - 100Mhz CPU VID StartUp Value......................... - 1.475v CPU VID Control............................... - 1.525v CPU VID Special Control....................... - Auto LDT Voltage Control........................... - 1.30v Chip Set Voltage Control...................... - 1.60v DRAM Voltage Control.......................... - 2.9v[/color] [b]DRAM Configuration Settings:[/b] [color=red] DRAM Frequency Set............................ - 200=RAM/FSB:01/01 Command Per Clock (CPC)....................... - Enable CAS Latency Control (Tcl)..................... - 2.5 RAS# to CAS# delay (Trcd)..................... - 4 Min RAS# active time (Tras)................... - 8 Row precharge time (Trp)...................... - 4 Row Cycle time (Trc).......................... - 9 Bus Clocks Row refresh cyc time (Trfc)................... - 19 Bus Clocks Row to Row delay (Trrd)....................... - 03 Bus Clocks Write recovery time (Twr)..................... - 02 Bus Clocks Write to Read delay (Twtr).................... - 02 Bus Clocks Read to Write delay (Trwt).................... - 04 Bus Clocks Refresh Period (Tref)......................... - 2560 Cycles Write CAS Latency (Twcl) ..................... - 05 Bus Clocks DRAM Bank Interleave.......................... - Enabled DQS Skew Control.............................. - Auto DQS Skew Value................................ - 0 DRAM Drive Strength........................... - Level 7 DRAM Data Drive Strength...................... - Level 2 Max Async Latency............................. - 09.0 Nano Seconds DRAM Response Time............................ - Fast Read Preamble Time............................ - 06.0 Nano Seconds IdleCycle Limit............................... - 256 Cycles Dynamic Counter............................... - Disable R/W Queue Bypass.............................. - 16 x Bypass Max.................................... - 04 x 32 Byte Granularity........................... - Disable(4 Bursts) [/color] ========== Dual Prime95 + 3dMark2001SE + CPU-Z: 3dMark2003: 3dMark2005: 3dMark2006 + Everest Home 2.20: ========== Short description: 275x10 = 2750Mhz @ 1.48v vcore 1T-2.5-4-8-4 @ 2.87v vdimm Share this post Link to post Share on other sites More sharing options...
TheFlowerKing Posted June 24, 2006 Posted June 24, 2006 DFI LANPARTY nF4 Ultra-D - 0623-2 BIOS Naked 148 Venus CABYE 0543FPMW under Big Typhoon 2x512Mb Mushkin LII BH-5 XFX 7900GT 256MB, 550/1644 80GB IDE hdd (8MB cache) 160GB IDE hdd (8MB cache) Enermax 535w ========== [b]Genie BIOS Settings:[/b] [color=red] FSB Bus Frequency - 282 LDT/FSB Frequency Ratio - 3x CPU/FSB Frequency Ratio - 11x PCI eXpress Frequency - 100Mhz CPU VID StartUp Value - AUTO CPU VID Control - 1.250v CPU VID Special Control - Above VID * 133% LDT Voltage Control - 1.20v Chip Set Voltage Control - 1.50v DRAM Voltage Control - 3.10v[/color] [b]DRAM Configuration Settings:[/b] [color=red] DRAM Frequency Set - 166=RAM/FSB:05/06 Command Per Clock (CPC) - Enable CAS Latency Control (Tcl) - 2.0 RAS# to CAS# delay (Trcd) - 02 Bus Clocks Min RAS# active time (Tras) - 05 Bus Clocks Row precharge time (Trp) - 02 Bus Clocks Row Cycle time (Trc) - 07 Bus Clocks Row refresh cyc time (Trfc) - 12 Bus Clocks Row to Row delay (Trrd) - 02 Bus Clocks Write recovery time (Twr) - 02 Bus Clocks Write to Read delay (Twtr) - 01 Bus Clocks Read to Write delay (Trwt) - 02 Bus Clocks Refresh Period (Tref) - 3120 Cycles Write CAS Latency (Twcl) - 01 DRAM Bank Interleave - Enabled DQS Skew Control - Auto DQS Skew Value - 0 DRAM Drive Strength - Level 7 DRAM Data Drive Strength - Level 2 Max Async Latency - 9.0 Nano Seconds DRAM Response Time - Fast Read Preamble Time - 6.5 Nano Seconds IdleCycle Limit - 16 Cycles Dynamic Counter - Enable R/W Queue Bypass - 16 x Bypass Max - 04 x 32 Byte Granularity - Disable(4 Bursts) [/color] ========== Prime95 + 3dMark2001SE (34734) + CPU-Z 1.33: http://img65.imageshack.us/img65/2244/prim...1is347344ln.jpg 3dMark2003 (20333) + Everest Read (5721): http://img216.imageshack.us/img216/9859/3d...readis57217.jpg 3dMark2005 (9374) + Everest Read (2386): http://img208.imageshack.us/img208/3138/3d...riteis23861.jpg 3dMark2006 (4835) + Everest Latency (41.7ns): http://img460.imageshack.us/img460/2589/3d...atencyis41p.jpg ========== short description: 282x11 @ 3102Mhz, 1.250v + 133% 2x512Mb @ 2-2-5-2 @ 3.1v @ 221MHz Share this post Link to post Share on other sites More sharing options...
Guest MadDias Posted June 25, 2006 Posted June 25, 2006 DFI LANPARTY RDX200 CF-DR (12/23/05 BIOS) AMD Athlon64 3700+ SanDiego ADA3700DAA5BN KAB3E 0547GPMW 2x 1024 MB G.SKILL F1-4000BIU2-2GBHV PC4000 Connect3D X1800XT 256mb, 711/1611 CAT6.5 (oc´ed with AtiTool) 2x MAXTOR 120GB S-ATA (RAID0) Pioneer DVD-RW DVR-110D ENERMAX Noisetaker 600W ========== [b]Genie BIOS Settings:[/b] [color=red] FSB Bus Frequency............................. - 275 HT PLL High Speed............................. - Enabled LDT/FSB Frequency Ratio....................... - 3x CPU/FSB Frequency Ratio....................... - 11x CPU VID StartUp Value......................... - Auto NB-SB Port Configuration...................... - Enhanced CPU VID Control............................... - 1.300V CPU VID Special Control....................... - 112% DRAM Voltage Control.......................... - 2.7v SB PCIE Voltage............................... - 1.8v NB Analog Voltage............................. - 1.2v LDT Bus Voltage............................... - 1.2v NB Core Voltage............................... - 1.2v [/color] [b]DRAM Configuration Settings:[/b] [color=red] DRAM Frequency Set............................ - 180=RAM/FSB:9/10 Command Per Clock (CPC)....................... - Enable CAS Latency Control (Tcl)..................... - 3.0 Bus Clocks RAS# to CAS# delay (Trcd)..................... - 03 Bus Clocks Min RAS# active time (Tras)................... - 00 Bus Clocks Row precharge time (Trp)...................... - 02 Bus Clocks Row Cycle time (Trc).......................... - 07 Bus Clocks Row refresh cyc time (Trfc)................... - 13 Bus Clocks Row to Row delay (Trrd)....................... - 02 Bus Clocks Write recovery time (Twr)..................... - 02 Bus Clocks Write to Read delay (Twtr).................... - 02 Bus Clocks Read to Write delay (Trwt).................... - 03 Bus Clocks Refresh Period (Tref)......................... - 4196 Cycles DRAM Bank Interleave.......................... - Enabled DQS Skew Control.............................. - Auto DQS Skew Value................................ - 0 DRAM Drive Strength........................... - Level 7 DRAM Data Drive Strength...................... - Level 2 (Reduce30%) Max Async Latency............................. - 7.0 ns Read Preamble Time............................ - 4.0 ns IdleCycle Limit............................... - 16 Cycles Dynamic Counter............................... - Enabled R/W Queue Bypass.............................. - 16 x Bypass Max.................................... - 7 x 32 Byte Granularity........................... - Disable (8 Bursts) [/color] ========== Prime95 + 3dMark2001SE + CPU-Z 1.33.1 + EverestUltimateEdition 2006(Memory read): 3dMark2003 + SuperPI 1M + AtiTool: ] 3dMark2005: 3dMark2006 + EverestUltimateEdition2006 (Memory write) + SiSoft Sandra (Memory bandwidth): Aquamark 3d: ========== short description: 275x11 @ 3025Mhz, 1.46v 3.0-3-0-2 @ 2.7V vdimm Share this post Link to post Share on other sites More sharing options...
Imgnryflgdotcom Posted June 25, 2006 Posted June 25, 2006 DFI LANPARTY nF4 Ultra-D (2006/04/06 BIOS) AMD Opteron 146 w/ Zalman CNPS9500LED (2 X 1GB) 2GB GSkill Extreme Series DDR500 PC4000 (F1-4000USU2-2GBHZ) eVga GeForce 7900GT KO w/ Zalman VF900, 550/1700 91.31 BETA Drivers 2x Hitachi Deskstar 7K80 80GB SATA II Hdds (RAID 0) Enermax Whisper 535W PSU * * * * ========== [b]Genie BIOS Settings:[/b] [color=red] FSB Bus Frequency............................. - 280 LDT/FSB Frequency Ratio....................... - Auto CPU/FSB Frequency Ratio....................... - 10.0 PCI eXpress Frequency......................... - 100Mhz CPU VID StartUp Value......................... - Startup CPU VID Control............................... - 1.525v CPU VID Special Control....................... - 104% LDT Voltage Control........................... - 1.20v Chip Set Voltage Control...................... - 1.50v DRAM Voltage Control.......................... - 2.60v[/color] [b]DRAM Configuration Settings:[/b] [color=red] DRAM Frequency Set............................ - 180=RAM/FSB: 09/10 Command Per Clock (CPC)....................... - Enable CAS Latency Control (Tcl)..................... - 3.0 RAS# to CAS# delay (Trcd)..................... - 4 Min RAS# active time (Tras)................... - 8 Row precharge time (Trp)...................... - 4 Row Cycle time (Trc).......................... - 12 Bus Clocks Row refresh cyc time (Trfc)................... - 16 Bus Clocks Row to Row delay (Trrd)....................... - 02 Bus Clocks Write recovery time (Twr)..................... - 02 Bus Clocks Write to Read delay (Twtr).................... - 02 Bus Clocks Read to Write delay (Trwt).................... - 03 Bus Clocks Refresh Period (Tref)......................... - 3120 Cycles DRAM Bank Interleave.......................... - Enabled DQS Skew Control.............................. - Auto DQS Skew Value................................ - 0 DRAM Drive Strength........................... - Auto DRAM Data Drive Strength...................... - Lvl 1 Max Async Latency............................. - Auto DRAM Response Time............................ - Normal Read Preamble Time............................ - Auto IdleCycle Limit............................... - 256 Cycles Dynamic Counter............................... - Enable R/W Queue Bypass.............................. - Auto Bypass Max.................................... - Auto 32 Byte Granularity........................... - Disable(4 Bursts) [/color] ========== Prime95 + 3dMark2001SE + CPU-Z + Everest 2.20: http://img332.imageshack.us/my.php?image=p...3dmark017fo.jpg 3dMark2003: 3dMark2005: 3dMark 2006: ========== short description: 280x10 @ 2800Mhz, 1.55 Vcore 3-4-4-8 @ 2.60v vdimm Share this post Link to post Share on other sites More sharing options...
EdLSmith Posted June 27, 2006 Posted June 27, 2006 DFI LANPARTY nF4 SLI-DR Expert(Tony's 406 BIOS) AMD Opteron 165 dual core CCB1E 0609FPMW 2x1024MB OCZ PC4000EB (OCZ5001024EBPE) BFG GeForce 7900GTXOC, 670/1640 84.25 drivers 74GB Western Digital Raptor 10,000RPM SATA hdd Plextor 716SA DL DVD Writer SATA PC P&C 510 ASL Power Supply * * * * ========== [b]Genie BIOS Settings:[/b] [color=red] FSB Bus Frequency............................. - 312 LDT/FSB Frequency Ratio....................... - Auto CPU/FSB Frequency Ratio....................... - 9 PCI eXpress Frequency......................... - 100Mhz CPU VID StartUp Value......................... - 1.350v CPU VID Control............................... - 1.350v CPU VID Special Control....................... - 119.2% LDT Voltage Control........................... - 1.40v Chip Set Voltage Control...................... - 1.52v DRAM Voltage Control.......................... - 2.80v[/color] [b]DRAM Configuration Settings:[/b] [color=red] DRAM Frequency Set............................ - 166=RAM/FSB:05/06 Command Per Clock (CPC)....................... - Enable CAS Latency Control (Tcl)..................... - 3 RAS# to CAS# delay (Trcd)..................... - 4 Min RAS# active time (Tras)................... - 8 Row precharge time (Trp)...................... - 2 Row Cycle time (Trc).......................... - 13 Bus Clocks Row refresh cyc time (Trfc)................... - 16 Bus Clocks Row to Row delay (Trrd)....................... - 03 Bus Clocks Write recovery time (Twr)..................... - 03 Bus Clocks Write to Read delay (Twtr).................... - 02 Bus Clocks Read to Write delay (Trwt).................... - 03 Bus Clocks Refresh Period (Tref)......................... - 2560 Cycles DRAM Bank Interleave.......................... - Enabled DQS Skew Control.............................. - Increase DQS Skew Value................................ - 220 DRAM Drive Strength........................... - 8 DRAM Data Drive Strength...................... - 1 Max Async Latency............................. - Auto DRAM Response Time............................ - Fast Read Preamble Time............................ - Auto IdleCycle Limit............................... - 4 Cycles Dynamic Counter............................... - Disable R/W Queue Bypass.............................. - 4 x Bypass Max.................................... - 02 x 32 Byte Granularity........................... - Disable(4 Bursts) [/color] ========== Prime95 + 3dMark2001SE + CPU-Z + Everest 2.20: http://s2.supload.com/image.php?get=Optero...60626163713.jpg 3dMark2003: http://s2.supload.com/image.php?get=3DMark...60626163714.jpg 3dMark2005: http://s2.supload.com/image.php?get=3DMark...60626163716.jpg 3dMark 2006: http://s2.supload.com/image.php?get=3DMark...60626163717.jpg ========== short description: 312 * 9 @ 2808Mhz, 1.350 * 119.2% 3-4-8-2 @ 2.80v vdimm Share this post Link to post Share on other sites More sharing options...
THunDA Posted June 28, 2006 Posted June 28, 2006 DFI LANPARTY nF4 SLI-DR (406BTA BIOS) AMD Opteron 170 (0550 UPMW) naked 4x1024MB Gskill F1-3200BIU2-2GBHX Powercolor X1900xtx , 690/800 6.5 drivers 2x74GB Western Digital Raptors in raid0 = Windows x64 NEC 3550a DVD writter Pc Power and Cooling 1kw PSU DangerDen = TDX + Maze4 + BIX2 + DDC-12v + 38 tubing * * * * ========== [b]Genie BIOS Settings:[/b] [color=red] FSB Bus Frequency............................. - 275 LDT/FSB Frequency Ratio....................... - Auto CPU/FSB Frequency Ratio....................... - 10 PCI eXpress Frequency......................... - 100Mhz CPU VID StartUp Value......................... - Startup CPU VID Control............................... - 1.55v CPU VID Special Control....................... - Auto LDT Voltage Control........................... - 1.30v Chip Set Voltage Control...................... - 1.60v DRAM Voltage Control.......................... - 2.70v + .03v[/color] [b]DRAM Configuration Settings:[/b] [color=red] DRAM Frequency Set............................ - 166 (5/6) Command Per Clock (CPC)....................... - Disable CAS Latency Control (Tcl)..................... - 2.5 RAS# to CAS# delay (Trcd)..................... - 3 Min RAS# active time (Tras)................... - 5 Row precharge time (Trp)...................... - 2 Row Cycle time (Trc).......................... - 7 Bus Clocks Row refresh cyc time (Trfc)................... - 14 Bus Clocks Row to Row delay (Trrd)....................... - 02 Bus Clocks Write recovery time (Twr)..................... - 02 Bus Clocks Write to Read delay (Twtr).................... - 01 Bus Clocks Read to Write delay (Trwt).................... - 02 Bus Clocks Refresh Period (Tref)......................... - Auto DRAM Bank Interleave.......................... - Enabled DQS Skew Control.............................. - Auto DQS Skew Value................................ - 0 DRAM Drive Strength........................... - Weak4 DRAM Data Drive Strength...................... - Auto Max Async Latency............................. - 9 DRAM Response Time............................ - Fast Read Preamble Time............................ - 7 IdleCycle Limit............................... - 16 Cycles Dynamic Counter............................... - Disable R/W Queue Bypass.............................. - 16 x Bypass Max.................................... - 07 x 32 Byte Granularity........................... - Disable(4 Bursts) [/color] ========== Prime95 + 3dMark2001SE + 2xCPU-Z + MBM + A64tweaker: 3dMark2003 + 2xCPU-Z + MBM + A64tweaker + Everest Reads: 3dMark2005 + 2xCPU-Z + MBM + A64tweaker + Everest Writes: 3dMark 2006 + 2xCPU-Z + MBM + A64tweaker + Everest Latency: ========== short description: 275x10 @ 2750Mhz 4x1024mb's Gskill HX'x 2.5-3-5-2-7-14 @ 229mhz 2.70v+.03vdimm Share this post Link to post Share on other sites More sharing options...
EdLSmith Posted June 30, 2006 Posted June 30, 2006 DFI LANPARTY nF4 SLI-DR Expert(Tony's 406 BIOS) AMD Opteron 165 CCBBE 0610DPMW DUAL CORE 2x1024MB OCZ PC4000EB (OCZ5001024EBPE) BFG GeForce 7900GTXOC, 640/1620 84.25 drivers 74GB Western Digital Raptor 10,000RPM SATA hdd Plextor 716SA DL DVD Writer SATA PC P&C 510 ASL Power Supply * * * * ========== [b]Genie BIOS Settings:[/b] [color=red] FSB Bus Frequency............................. - 334 LDT/FSB Frequency Ratio....................... - Auto CPU/FSB Frequency Ratio....................... - 9 PCI eXpress Frequency......................... - 100Mhz CPU VID StartUp Value......................... - 1.350v CPU VID Control............................... - 1.475v CPU VID Special Control....................... - 112.0% LDT Voltage Control........................... - 1.30v Chip Set Voltage Control...................... - 1.52v DRAM Voltage Control.......................... - 2.80v[/color] [b]DRAM Configuration Settings:[/b] [color=red] DRAM Frequency Set............................ - 166=RAM/FSB:05/06 Command Per Clock (CPC)....................... - Disable CAS Latency Control (Tcl)..................... - 3 RAS# to CAS# delay (Trcd)..................... - 4 Min RAS# active time (Tras)................... - 8 Row precharge time (Trp)...................... - 2 Row Cycle time (Trc).......................... - 13 Bus Clocks Row refresh cyc time (Trfc)................... - 16 Bus Clocks Row to Row delay (Trrd)....................... - 03 Bus Clocks Write recovery time (Twr)..................... - 03 Bus Clocks Write to Read delay (Twtr).................... - 02 Bus Clocks Read to Write delay (Trwt).................... - 03 Bus Clocks Refresh Period (Tref)......................... - 2560 Cycles DRAM Bank Interleave.......................... - Enabled DQS Skew Control.............................. - Increase DQS Skew Value................................ - 220 DRAM Drive Strength........................... - 8 DRAM Data Drive Strength...................... - 1 Max Async Latency............................. - Auto DRAM Response Time............................ - Normal Read Preamble Time............................ - Auto IdleCycle Limit............................... - 4 Cycles Dynamic Counter............................... - Disable R/W Queue Bypass.............................. - 4 x Bypass Max.................................... - 02 x 32 Byte Granularity........................... - Disable(4 Bursts) [/color] ========== Prime95 + 3dMark2001SE + CPU-Z + Everest 2.20: 3dMark2003: 3dMark2005: 3dMark2006: ========== short description: 334 * 9 @ 3006Mhz, 1.475 * 112.0% 3-4-8-2 @ 2.80v vdimm Share this post Link to post Share on other sites More sharing options...
Recommended Posts
Please sign in to comment
You will be able to leave a comment after signing in
Sign In Now