Jump to content
Sign in to follow this  
Angry_Games

Socket 939 Overclocking Database

Recommended Posts

DFI LANPARTY nF4 Ultra-D (modded to SLI-D) (3/29/2006 BIOS)

 

AMD X2 3800+ dual core

 

2x1024MB Corsair XMS4000 PT

 

ATI X1900XT 512MB PCI-E, 7.8 CAT drivers

 

36GB Western Digital Raptor 10,000RPM SATA hdd

 

Asus 52x Quiet-Trak CD-ROM

 

OCZ Powerstream 520w Power Supply

 

 

 

*

*

 

 

 

*

*

 

==========

 

[b]Genie BIOS Settings:[/b]

[color=red]

FSB Bus Frequency.............................  -  250

LDT/FSB Frequency Ratio.......................  -  Auto

CPU/FSB Frequency Ratio.......................  -  Auto

PCI eXpress Frequency.........................  -  100Mhz



CPU VID StartUp Value.........................  -  1.500v



CPU VID Control...............................  -  Auto

CPU VID Special Control.......................  -  VID +110%

LDT Voltage Control...........................  -  1.20v 

Chip Set Voltage Control......................  -  1.50v

DRAM Voltage Control..........................  -  2.90v[/color]



[b]DRAM Configuration Settings:[/b]

[color=red]

DRAM Frequency Set............................  -  200=RAM/FSB:01/01

Command Per Clock (CPC).......................  -  Enable 

CAS Latency Control (Tcl).....................  -  03 Bus Clocks

RAS# to CAS# delay (Trcd).....................  -  04 Bus Clocks

Min RAS# active time (Tras)...................  -  09 Bus Clocks

Row precharge time (Trp)......................  -  04 Bus Clocks

Row Cycle time (Trc)..........................  -  12 Bus Clocks

Row refresh cyc time (Trfc)...................  -  24 Bus Clocks

Row to Row delay (Trrd).......................  -  03 Bus Clocks

Write recovery time (Twr).....................  -  03 Bus Clocks

Write to Read delay (Twtr)....................  -  02 Bus Clocks

Read to Write delay (Trwt)....................  -  03 Bus Clocks

Refresh Period (Tref).........................  -  3120 Cycles

DRAM Bank Interleave..........................  -  Enabled



DQS Skew Control..............................  -  Auto

DQS Skew Value................................  -  0

DRAM Drive Strength...........................  -  Auto

DRAM Data Drive Strength......................  -  Auto

Max Async Latency.............................  -  Auto

DRAM Response Time............................  -  Normal

Read Preamble Time............................  -  Auto

IdleCycle Limit...............................  -  256 Cycles

Dynamic Counter...............................  -  Disable

R/W Queue Bypass..............................  -  16 x

Bypass Max....................................  -  07 x

32 Byte Granularity...........................  -  Disable(4 Bursts)

[/color]

 

 

==========

 

 

Prime95 + 3dMark2001SE + CPU-Z + Everest 2.20:

 

http://www.angrygames.com/ocdb/angry/nf4/3...x2_250x10-1.gif

 

 

3dMark2003:

 

3800x2_250x10-2.gif

 

 

3dMark2005:

 

3800x2_250x10-3.gif

 

 

 

3dMark 2006:

 

3800x2_250x10-4.gif

 

 

Aquamark 3d:

 

3800x2_250x10-5.gif

 

 

 

==========

 

 

 

short description:

250x10 @ 2500Mhz

3-4-9-4 @ 2.90v vdimm

Share this post


Link to post
Share on other sites

DFI LANPARTY nF4 (3/29/06 BIOS)

 

AMD Opteron 180 Dual core

 

Zalman CNPS9700 Led CPU HSF

 

2x256mb Corsair CMX256A-3200C2

 

XFX GeForce 8800GTS 580M 320MB DDR3, 621/1053 6.14.011.6371 drivers

 

2xMaxtor 6L100MO Raid 0 186GB HDD

 

Lite-On DVDRW LH-20A1H DVD Drive

 

Antec TruePower 480w PSU

 

 

==========

 

[b]Genie BIOS Settings:[/b]

[color=red]

FSB Bus Frequency.............................  -  300

LDT/FSB Frequency Ratio.......................  -  Auto

CPU/FSB Frequency Ratio.......................  -  10

PCI eXpress Frequency.........................  -  105Mhz



CPU VID StartUp Value.........................  -  Startup



CPU VID Control...............................  -  1.325V

CPU VID Special Control.......................  -  Above VID * 126%

LDT Voltage Control...........................  -  1.40v 

Chip Set Voltage Control......................  -  1.70v

DRAM Voltage Control..........................  -  3.0v[/color]



[b]DRAM Configuration Settings:[/b]

[color=red]

DRAM Frequency Set............................  -  140=RAM/FSB:7/10

Command Per Clock (CPC).......................  -  Enable 

CAS Latency Control (Tcl).....................  -  2.0

RAS# to CAS# delay (Trcd).....................  -  03 Bus Clocks

Min RAS# active time (Tras)...................  -  07 Bus Clocks

Row precharge time (Trp)......................  -  03 Bus Clocks

Row Cycle time (Trc)..........................  -  Auto

Row refresh cyc time (Trfc)...................  -  14 Bus Clocks

Row to Row delay (Trrd).......................  -  Auto

Write recovery time (Twr).....................  -  Auto

Write to Read delay (Twtr)....................  -  Auto

Read to Write delay (Trwt)....................  -  Auto

Refresh Period (Tref).........................  -  Auto

Write CAS Latency (Twcl)......................  -  Auto

DRAM Bank Interleave..........................  -  Enabled



DQS Skew Control..............................  -  Auto

DQS Skew Value................................  -  0

DRAM Drive Strength...........................  -  Level 8

DRAM Data Drive Strength......................  -  Level 4(Reduce 00%)

Max Async Latency.............................  -  Auto

DRAM Response Time............................  -  Fast

Read Preamble Time............................  -  Auto

IdleCycle Limit...............................  -  256 Cycles

Dynamic Counter...............................  -  Disable

R/W Queue Bypass..............................  -  16 x

Bypass Max....................................  -  07 x

32 Byte Granularity...........................  -  Disable(4 Bursts)

[/color]

 

 

==========

 

 

Prime95 + 3dMark2001SE + CPU-Z + Everest 2.20:

 

th_OCDBEntry23ghzResize.jpg

 

 

3dMark2003:

 

th_OCDB3dMark03Resize.jpg

 

3dMark2005:

 

th_OCDB3dMark05Resize.jpg

 

 

 

3dMark 2006:

 

th_OCDB3dMark06Resize.jpg

 

 

 

==========

 

 

 

short description:

300 x 10: 3000mhz, 1.62Vcore

2-3-3-7 3.0Vdimm

Share this post


Link to post
Share on other sites

DFI LANPARTY nF4 SLI-DR Expert (406-BTA BIOS)

 

AMD Opteron 165 (CCBBE 0615 EPMW)

 

DD TDX waterblock, Swiftech MCR220-QP radiator, Laing D5 pump

 

2x1024MB OCZ PC4000EB (OCZ5001024EBPE)

 

eVGA GeForce 7800 GTX (256 MB), 491/650, 94.24 drivers

 

150GB Western Digital Raptor, 2x500 GB WD RE2 RAID1 on 3ware 9650SE-4LPML PCIe SATA controller

 

Lite-On LH-20A1L SATA burner, LG GDR8164B DVD-ROM

 

OCZ GameXStream 700w Power Supply

 

 

 

 

==========

 

[b]Genie BIOS Settings:[/b]

[color=red]

FSB Bus Frequency.............................  -  334

LDT/FSB Frequency Ratio.......................  -  3x

CPU/FSB Frequency Ratio.......................  -  9x

PCI eXpress Frequency.........................  -  100Mhz



CPU VID StartUp Value.........................  -  1.475v



CPU VID Control...............................  -  1.475

CPU VID Special Control.......................  -  Above VID * 104.8%

LDT Voltage Control...........................  -  1.20v 

Chip Set Voltage Control......................  -  1.52v

DRAM Voltage Control..........................  -  2.74v[/color]



[b]DRAM Configuration Settings:[/b]

[color=red]

DRAM Frequency Set............................  -  150=RAM/FSB:03/04

Command Per Clock (CPC).......................  -  Enable 

CAS Latency Control (Tcl).....................  -  3

RAS# to CAS# delay (Trcd).....................  -  3

Min RAS# active time (Tras)...................  -  8

Row precharge time (Trp)......................  -  2

Row Cycle time (Trc)..........................  -  09 Bus Clocks

Row refresh cyc time (Trfc)...................  -  13 Bus Clocks

Row to Row delay (Trrd).......................  -  02 Bus Clocks

Write recovery time (Twr).....................  -  02 Bus Clocks

Write to Read delay (Twtr)....................  -  02 Bus Clocks

Read to Write delay (Trwt)....................  -  03 Bus Clocks

Refresh Period (Tref).........................  -  3120 Cycles

Odd Divisor Correct...........................  -  Disabled

DRAM Bank Interleave..........................  -  Enabled



DQS Skew Control..............................  -  Auto

DQS Skew Value................................  -  0

DRAM Drive Strength...........................  -  Level 8

DRAM Data Drive Strength......................  -  Level 1 (Reduce 50%)

Max Async Latency.............................  -  8ns

DRAM Response Time............................  -  Normal

Read Preamble Time............................  -  5ns

IdleCycle Limit...............................  -  16 Cycles

Dynamic Counter...............................  -  Disable

R/W Queue Bypass..............................  -  16 x

Bypass Max....................................  -  06 x

32 Byte Granularity...........................  -  Disable(4 Bursts)

[/color]

 

 

==========

 

 

Orthos + 3DMark2001SE + CPU-Z (had 16x.xx FW installed w/2k1, dropped score by ~1050 vs 94.24):

 

ocdbthumb.png

 

 

 

3DMark2003:

 

2k3thumb.png

 

 

 

3DMark2005:

 

2k5thumb.png

 

 

 

3DMark 2006:

 

2k6thumb.png

 

 

 

AquaMark3:

 

am3thumb.jpg

 

 

 

==========

 

 

 

short description:

334x9 @ 3007 MHz, 1.54v

3-3-2-8 @ 2.74v vdimm

Share this post


Link to post
Share on other sites

DFI LANPARTY nF4 Ultra-D (7/04-2bta BIOS)

 

AMD X2 4200+ LCBQE 0723VPMW

 

2x1GB OCZ PC4000EB (OCZ5001024EBPE-K)

 

BFG 7950GT OC, (stock)

 

320GB Seagate Barracuda 7200.10 ST3320620AS SATA hdd

 

Antec Neo HE 550

 

==========

 

[b]Genie BIOS Settings:[/b]

[color=red]

FSB Bus Frequency.............................  -  323

LDT/FSB Frequency Ratio.......................  -  3

CPU/FSB Frequency Ratio.......................  -  9

PCI eXpress Frequency.........................  -  100Mhz



CPU VID StartUp Value.........................  -  auto



CPU VID Control...............................  -  1.375v

CPU VID Special Control.......................  -  auto

LDT Voltage Control...........................  -  1.30v 

Chip Set Voltage Control......................  -  1.60v

DRAM Voltage Control..........................  -  2.80v[/color]



[b]DRAM Configuration Settings:[/b]

[color=red]

DRAM Frequency Set............................  -  150=RAM/FSB:03/04

Command Per Clock (CPC).......................  -  Enable 

CAS Latency Control (Tcl).....................  -  2.5

RAS# to CAS# delay (Trcd).....................  -  3

Min RAS# active time (Tras)...................  -  7

Row precharge time (Trp)......................  -  2

Row Cycle time (Trc)..........................  -  9 Bus Clocks

Row refresh cyc time (Trfc)...................  -  12 Bus Clocks

Row to Row delay (Trrd).......................  -  02 Bus Clocks

Write recovery time (Twr).....................  -  02 Bus Clocks

Write to Read delay (Twtr)....................  -  01 Bus Clocks

Read to Write delay (Trwt)....................  -  02 Bus Clocks

Refresh Period (Tref).........................  -  3120 Cycles

DRAM Bank Interleave..........................  -  Enabled



DQS Skew Control..............................  -  Auto

DQS Skew Value................................  -  0

DRAM Drive Strength...........................  -  Normal 4 (Level 8)

DRAM Data Drive Strength......................  -  Level 2

Max Async Latency.............................  -  8 ns

DRAM Response Time............................  -  Normal

Read Preamble Time............................  -  6.5 ns

IdleCycle Limit...............................  -  128

Dynamic Counter...............................  -  Disable

R/W Queue Bypass..............................  -  16 x

Bypass Max....................................  -  07 x

32 Byte Granularity...........................  -  Disable(4 Bursts)

[/color]

 

 

==========

 

toledodiyxi3.th.jpg

 

3d03rv1.th.jpg

 

3d05tp3.th.jpg

 

3d06hu1.th.jpg

 

2906ju0.th.jpg

 

 

short description:

323x9 @ 2906Mhz, 1.375v

2.5-3-7-2 @ 2.80v vdimm

Share this post


Link to post
Share on other sites

DFI LANPARTY nF4 SLI-DR (11/14/2005)

 

AMD Opteron 165

 

2GB OCZ PC4000 Gold Edition Dual Channel Kit (OCZ5002048ELGE-K)

 

eVGA GeForce 7900GT CO, 500/1500 169.01 drivers

 

250GB Western Digital Caviar 7,200RPM SATA 3.0Gb/s HDD

 

LITE-ON Black LightScribe 5x DVD-RAM Burner

 

OCZ PowerStream 520w SLI Power Supply

 

 

 

*

*

*

*

 

==========

 

[b]Genie BIOS Settings:[/b]

[color=red]

FSB Bus Frequency.............................  -  310

LDT/FSB Frequency Ratio.......................  -  3x

CPU/FSB Frequency Ratio.......................  -  9x

PCI eXpress Frequency.........................  -  100Mhz



CPU VID StartUp Value.........................  -  StartUp



CPU VID Control...............................  -  1.375v

CPU VID Special Control.......................  -  Auto

LDT Voltage Control...........................  -  1.20v 

Chip Set Voltage Control......................  -  1.50v

DRAM Voltage Control..........................  -  2.60v[/color]



[b]DRAM Configuration Settings:[/b]

[color=red]

DRAM Frequency Set............................  -  166=RAM/FSB:05/06

Command Per Clock (CPC).......................  -  Enable 

CAS Latency Control (Tcl).....................  -  3

RAS# to CAS# delay (Trcd).....................  -  4

Min RAS# active time (Tras)...................  -  8

Row precharge time (Trp)......................  -  4

Row Cycle time (Trc)..........................  -  07 Bus Clocks

Row refresh cyc time (Trfc)...................  -  14 Bus Clocks

Row to Row delay (Trrd).......................  -  02 Bus Clocks

Write recovery time (Twr).....................  -  02 Bus Clocks

Write to Read delay (Twtr)....................  -  02 Bus Clocks

Read to Write delay (Trwt)....................  -  03 Bus Clocks

Refresh Period (Tref).........................  -  3120 Cycles

DRAM Bank Interleave..........................  -  Enabled



DQS Skew Control..............................  -  Auto

DQS Skew Value................................  -  0

DRAM Drive Strength...........................  -  Level 08

DRAM Data Drive Strength......................  -  Level 1

Max Async Latency.............................  -  8.0ns

DRAM Response Time............................  -  Normal

Read Preamble Time............................  -  06.0 ns

IdleCycle Limit...............................  -  Auto

Dynamic Counter...............................  -  Disable

R/W Queue Bypass..............................  -  16 x

Bypass Max....................................  -  07 x

32 Byte Granularity...........................  -  Disable(4 Bursts)

[/color]

 

 

==========

 

 

Orthos + 3dMark2001SE + 2x CPU-Z:

 

screen1yh0.th.jpg

 

3dMark2003:

 

screen2vm5.th.jpg

 

3dMark2005:

 

screen3ag6.th.jpg

 

 

3dMark 2006:

 

screen4kc0.th.jpg

 

 

==========

 

 

 

short description:

310x9 @ 2794Mhz, 1.375v vCore Voltage

3-4-4-8-2T @ 2.60v vDimm

Share this post


Link to post
Share on other sites

DFI LANPARTY NF4 Ultra-D (Merlin's 23.11.07)

 

AMD 165 Opteron

 

Stock Opteron Heatsink

 

2x1024MB OCZ GX XTC PC4000

 

ATI Radeon X1950pro 256mb

 

120GB Maxtor Diamond Max HDD Pata

 

Evercool VC-RE Chipset

 

Syncmaster 225BW

 

CoolerMaster Stacker 830

 

OCZ GameXstream 700W Sli

 

ultradtemplate1oj7.jpg

 

*****************

 

Genie BIOS Settings:

 

FSB Bus Frequency.............................  -  326
LDT/FSB Frequency Ratio.......................  -  x3
CPU/FSB Frequency Ratio.......................  -  x9
PCI eXpress Frequency.........................  -  100Mhz

CPU VID StartUp Value.........................  -  StartUp

CPU VID Control...............................  -  1.400v
CPU VID Special Control.......................  -  Auto
LDT Voltage Control...........................  -  1.20v 
Chip Set Voltage Control......................  -  1.50v
DRAM Voltage Control..........................  -  2.65v

DRAM Configuration Settings:

 

DRAM Frequency Set............................  -  150=RAM/FSB:03/04
Command Per Clock (CPC).......................  -  Enable 
CAS Latency Control (Tcl).....................  -  3
RAS# to CAS# delay (Trcd).....................  -  4
Min RAS# active time (Tras)...................  -  8
Row precharge time (Trp)......................  -  4
Row Cycle time (Trc)..........................  -  7 Bus Clocks
Row refresh cyc time (Trfc)...................  -  13 Bus Clocks
Row to Row delay (Trrd).......................  -  02 Bus Clocks
Write recovery time (Twr).....................  -  02 Bus Clocks
Write to Read delay (Twtr)....................  -  02 Bus Clocks
Read to Write delay (Trwt)....................  -  04 Bus Clocks
Refresh Period (Tref).........................  -  3120 Cycles
Odd Divisor Correct...........................  -  Disable
DRAM Bank Interleave..........................  -  Enabled

DQS Skew Control..............................  -  Auto
DQS Skew Value................................  -  0
DRAM Drive Strength...........................  -  Auto
DRAM Data Drive Strength......................  -  Level 1 (Reduce 50%)
Max Async Latency.............................  -  9ns
DRAM Response Time............................  -  Fastest
Read Preamble Time............................  -  6.0ns
IdleCycle Limit...............................  -  256 Cycles
Dynamic Counter...............................  -  Disable
R/W Queue Bypass..............................  -  16 x
Bypass Max....................................  -  07 x
32 Byte Granularity...........................  -  Disable(4 Bursts)

**************

 

Dual Prime95 + 3dMark2001SE + CPU-Z:

 

ocdbhs7.th.jpg

 

3dMark2003:

 

ocdb1jk8.th.jpg

 

3dMark2005:

 

ocdb2vr8.th.jpg

 

3dMark2006:

 

ocdb3ut3.th.jpg

 

Aquamark

 

ocdb4ib2.th.jpg

 

 

 

Short Description:

 

326x9 @ 2934Mhz, 1.400v

3-4-8-4 @ 2.65v vdimm

 

 

Logan

Share this post


Link to post
Share on other sites

DFI LANPARTY nF4 SLI-D (704-2BT BIOS)

 

AMD A64 3700+ San Diego KACAE 0546EPAW

 

2x1024MB G.Skill HX PC3200(DDR400) (F1-3200BIU2-2GBHX)

 

PNY GeForce 7800GT 256MB GDDR3, 400/1000Mhz Forceware 163.75 WHQL drivers

 

250GB Seagate Baracuda 7200.8 7,200RPM SATA NCQ 8MB Cache hdd (ST3250823AS)

 

NEC ND4550A DVD-RAM SuperMulti Drive 2MB Cache

 

Tagan TG530-U15 530w ATX v2.01 Modular Power Supply

 

==========

 

[b]Genie BIOS Settings:[/b]
[color=red]
FSB Bus Frequency.............................  -  311
LDT/FSB Frequency Ratio.......................  -  3x
CPU/FSB Frequency Ratio.......................  -  9x
PCI eXpress Frequency.........................  -  100Mhz

CPU VID StartUp Value.........................  -  1.500v

CPU VID Control...............................  -  1.325v
CPU VID Special Control.......................  -  113%
LDT Voltage Control...........................  -  1.20v 
Chip Set Voltage Control......................  -  1.50v
DRAM Voltage Control..........................  -  2.70v
DRAM Voltage adjustment +0.3v.................  -  Disabled[/color]

[b]DRAM Configuration Settings:[/b]
[color=red]
DRAM Frequency Set............................  -  150
Command Per Clock (CPC).......................  -  Enable 
CAS Latency Control (Tcl).....................  -  3
RAS# to CAS# delay (Trcd).....................  -  3
Min RAS# active time (Tras)...................  -  0
Row precharge time (Trp)......................  -  2
Row Cycle time (Trc)..........................  -  7 Bus Clocks
Row refresh cyc time (Trfc)...................  -  13 Bus Clocks
Row to Row delay (Trrd).......................  -  02 Bus Clocks
Write recovery time (Twr).....................  -  02 Bus Clocks
Write to Read delay (Twtr)....................  -  01 Bus Clocks
Read to Write delay (Trwt)....................  -  02 Bus Clocks
Refresh Period (Tref).........................  -  1032 Cycles
DRAM Bank Interleave..........................  -  Enabled

DQS Skew Control..............................  -  Auto
DQS Skew Value................................  -  0
DRAM Drive Strength...........................  -  Weak 4
DRAM Data Drive Strength......................  -  Level 3
Max Async Latency.............................  -  7.0 ns
DRAM Response Time............................  -  Normal
Read Preamble Time............................  -  6.0 ns
IdleCycle Limit...............................  -  16 Cycles
Dynamic Counter...............................  -  Enabled
R/W Queue Bypass..............................  -  16 x
Bypass Max....................................  -  07 x
32 Byte Granularity...........................  -  Disable(4 Bursts)
[/color]

 

==========

 

SP2004 + 3DMark 2001SE + CPUZ

704bt3dmark2001qy6.th.png

 

3DMark 03

704bt3dmark2003ly4.th.png

 

3DMark 05

704bt3dmark2005gu8.th.png

 

3DMark 06

704bt3dmark2006ka4.th.png

 

Aquamark 3

704btaquamarkve6.th.png

 

==========

 

short description:

311 x 9 = 2799MHz, 1.46v

3-3-0-2 @ 2.70 vdimm

Share this post


Link to post
Share on other sites

DFI LANPARTY nF4 Ultra D (04/06BTA BIOS)

 

AMD Opteron 165 CCBWE 0536MPMW(1800Mhz/1mb L2 per core)+ NO IHS

 

2x512MB Patriot XBL PC4800(TCCD)

 

EVGA GeForce 7600GT 256MB PCI-E 16x, 600/800 169.21 drivers

 

2x 74GB WD Raptor FLCO Sata hdds(raid0)+ 2x 80GB Hitachi Deskstar SataII hdds(raid0)

 

Nec 3550A Dvd R/W(Ide1)+LiteOn SOHW-1213S Dvd R/W(Ide2)

 

Thermaltake PurePower 460w Power Supply W0068(Not Recomended!!)

 

 

==========

 

[b]Genie BIOS Settings:[/b]
[color=red]
FSB Bus Frequency.............................  -  290 MHZ
LDT/FSB Frequency Ratio.......................  -  x 3.0
CPU/FSB Frequency Ratio.......................  -  x 9.0
PCI eXpress Frequency.........................  -  101Mhz

CPU VID StartUp Value.........................  -  1.45v

CPU VID Control...............................  -  1.325v
CPU VID Special Control....................... -  VID Special * 110%
LDT Voltage Control...........................  -  1.20v 
Chip Set Voltage Control......................  -  1.50v
DRAM Voltage Control..........................  -  2.70v
DRAM+.03V If it's not 3.2V....................  -  Enable[/color]

[b]DRAM Configuration Settings:[/b]
[color=red]
DRAM Frequency Set............................  -  140=RAM/FSB:07/10
Command Per Clock (CPC).......................  -  Enable 
CAS Latency Control (Tcl).....................  -  2.0
RAS# to CAS# delay (Trcd).....................  -  2
Min RAS# active time (Tras)...................  -  5
Row precharge time (Trp)......................  -  2
Row Cycle time (Trc)..........................  -  Auto
Row refresh cyc time (Trfc)...................  -  Auto
Row to Row delay (Trrd).......................  -  03 Bus Clocks
Write recovery time (Twr).....................  -  03 Bus Clocks
Write to Read delay (Twtr)....................  -  02 Bus Clocks
Read to Write delay (Trwt)....................  -  03 Bus Clocks
Refresh Period (Tref).........................  -  3120 Cycles
DRAM Bank Interleave..........................  -  Enabled

DQS Skew Control..............................  -  Auto
DQS Skew Value................................  -  0
DRAM Drive Strength...........................  -  Auto
DRAM Data Drive Strength......................  -  Auto
Max Async Latency.............................  -  Auto
DRAM Response Time............................  -  Fast
Read Preamble Time............................  -  Auto
IdleCycle Limit...............................  -  32 Cycles
Dynamic Counter...............................  -  Disable
R/W Queue Bypass..............................  -  16 x
Bypass Max....................................  -  07 x
32 Byte Granularity...........................  -  Disable(4 Bursts)
[/color]

 

==========

 

 

Orthos (SP2004) + 3dMark2001SE + 2x CPU-Z:

 

290x9ocdbpic1.jpg

 

 

3dMark2003:

 

290x9ocdbpic2.jpg

 

 

3dMark2005:

 

290x9ocdbpic3.jpg

 

 

 

3dMark 2006:

 

290x9ocdbpic4.jpg

 

Aquamark 3:

290x9ocdbpic5.jpg

 

 

 

==========

 

 

 

short description:

290x9 @ 2610Mhz, 1.45v cpu

2-2-5-2 @ 2.73v vdimm

Share this post


Link to post
Share on other sites

DFI CFX3200 DR/G

AMD Athlon 3800x2

4x512mb DDR 510 2.5 3 3 7

Seagate 16mb 250gb HDD

GeCube ATI HD 3850 512

LG IDE DVD-CD Burner Combo 2MB Cache

thermaltake toughpower 750w modular

 

http://valid.x86-secret.com/show_oc.php?id=258854

 

dont have time to resize.. you wouldnt be able to read 'em anyway if i did

 

sp1m.jpg

3dmark01.jpg

wprime.jpg

 

how do i reopen 3dr files fomr 3dmark06?

 

still adding to it

Share this post


Link to post
Share on other sites

DFI LANPARTY nF4 Ultra-D - BIOS 6/23/2005

AMD 64 X2 4200 (Manchester) 2x512kB L2 Cache,

Bios (704-22V6) Bigtoe Tweaked 704-2A/Memtest v1.65 Added by Tmod

Thermalright XP-90 and NMB Fans (3612KL-04W-B66)

Thermalright HR-05 SLI Chipset Cooler

G.SKILL F1-3200PHU2-2GBZX 2x1GB DDR400 PC3200, Model F1-3200PHU2-2GBZX

Silverstone Strider 560w, Model ST56F

Colorful Nvidia 8600GTS 256MB PCI-E x16 Video Card (745/1020)

Seagate 250GB SATA II 7200RPM 16MB Cache HDD

Lite-On DVD Writer + LG DVD ROM, Model SHM-165P6S + GDR-H30N

 

 

Genie BIOS Settings:

FSB Bus Frequency.............................  -  266
LDT/FSB Frequency Ratio.......................  -  x4.0
CPU/FSB Frequency Ratio.......................  -  10.0
PCI eXpress Frequency.........................  -  100Mhz

CPU VID StartUp Value.........................  -  1.5v

CPU VID Control...............................  -  1.475v
CPU VID Special Control.......................  -  Above VID *104%
LDT Voltage Control...........................  -  1.20v 
Chip Set Voltage Control......................  -  1.70v
DRAM Voltage Control..........................  -  2.80v

[b]DRAM Configuration Settings:[/b]
[color=red]
DRAM Frequency Set............................  -  200=RAM/FSB:01/01
Command Per Clock (CPC).......................  -  Enable 
CAS Latency Control (Tcl).....................  -  03 Bus Clocks
RAS# to CAS# delay (Trcd).....................  -  03 Bus Clocks
Min RAS# active time (Tras)...................  -  05 Bus Clocks
Row precharge time (Trp)......................  -  02 Bus Clocks
Row Cycle time (Trc)..........................  -  15 Bus Clocks
Row refresh cyc time (Trfc)...................  -  17 Bus Clocks
Row to Row delay (Trrd).......................  -  02 Bus Clocks
Write recovery time (Twr).....................  -  03 Bus Clocks
Write to Read delay (Twtr)....................  -  02 Bus Clocks
Read to Write delay (Trwt)....................  -  04 Bus Clocks
Refresh Period (Tref).........................  -  Auto
Write CAS Latency (Twcl)......................  -  1
DRAM Bank Interleave..........................  -  Enabled

DQS Skew Control..............................  -  Off
DQS Skew Value................................  -  0
DRAM Drive Strength...........................  -  Auto
DRAM Data Drive Strength......................  -  Auto
Max Async Latency.............................  -  08.0 Nano Seconds
DRAM Response Time............................  -  Normal
Read Preamble Time............................  -  06.0 Nano Seconds
IdleCycle Limit...............................  -  256 Cycles
Dynamic Counter...............................  -  Disable
R/W Queue Bypass..............................  -  16 x
Bypass Max....................................  -  04 x
32 Byte Granularity...........................  -  Disable(4 Bursts)

[/color]

 

 

Prime95 + 3DMark2001SE + CPU-Z:

 

http://i62.photobucket.com/albums/h89/gmieroxx/post1.jpg

 

3DMark2003:

 

http://i62.photobucket.com/albums/h89/gmieroxx/post2.jpg

 

 

3DMark2005:

 

http://i62.photobucket.com/albums/h89/gmieroxx/post3.jpg

 

 

3DMark2006:

 

http://i62.photobucket.com/albums/h89/gmieroxx/post4.jpg

 

Aquamark3:

 

http://i62.photobucket.com/albums/h89/gmieroxx/post5.jpg

 

Short Description:

266x10 @ 2660Mhz, 1.475v + 104%

3-3-5-2 @ 2.8v vdimm

Share this post


Link to post
Share on other sites
Guest SuppA-SnipA

DFI LANPARTY nF4 NF4-D (xxx BIOS)

 

AMD Athlon 4000+

 

2x1024MB OCZ PC3200 (OCZ4002048PFDC-K)[/size]

 

XFX GeForce 8600 GTS, 675 MHz / 1008MHz, 169.21 Drivers

 

160GB, 200GB Western Digital SATA hdd's and 30gb notebook hdd (osx86 Leopard)

 

Samsung SH-182M DVD-RW drive

 

Antec Truepower Trio 650Watt

 

 

 

BIOS screenshots

 

biosmain1bg0.th.jpg

biosmain2mn6.th.jpg

dramnk7.th.jpg

dram2rf9.th.jpg

 

 

==========

 

[b]Genie BIOS Settings:[/b]

[color=red]

FSB Bus Frequency.............................  -  246

LDT/FSB Frequency Ratio.......................  -  x 4

CPU/FSB Frequency Ratio.......................  -  x 11

PCI eXpress Frequency.........................  -  100Mhz



CPU VID StartUp Value.........................  -  Startup	



CPU VID Control...............................  -  1.375 V

CPU VID Special Control.......................  -  Auto

LDT Voltage Control...........................  -  1.20v 

Chip Set Voltage Control......................  -  1.50v

DRAM Voltage Control..........................  -  2.70v[/color]



[b]DRAM Configuration Settings:[/b]		

[color=red]

DRAM Frequency Set............................  -  180=RAM/DRAM/FSB:9/10

CAS Latency Control (Tcl).....................  -  3.0

RAS# to CAS# delay (Trcd).....................  -  03 Bus Clocks

Min RAS# active time (Tras)...................  -  07 Bus Clocks

Row precharge time (Trp)......................  -  03 Bus Clocks

Row Cycle time (Trc)..........................  -  Auto

Row refresh cyc time (Trfc)...................  -  Auto

Row to Row delay (Trrd).......................  -  Auto

Write recovery time (Twr).....................  -  Auto

Write to Read delay (Twtr)....................  -  Auto

Read to Write delay (Trwt)....................  -  Auto

Refresh Period (Tref).........................  -  Auto

Write CAS Latency (Twcl)....................... -  Auto

DRAM Bank Interleave..........................  -  Enabled



DQS Skew Control..............................  -  Auto

DQS Skew Value................................  -  0

DRAM Drive Strength...........................  -  Auto

DRAM Data Drive Strength......................  -  Level 4

Max Async Latency.............................  -  07.0 Nano Seconds

Read Preamble Time............................  -  Auto

IdleCycle Limit...............................  -  256 Cycles

Dynamic Counter...............................  -  Disable

R/W Queue Bypass..............................  -  16 x

Bypass Max....................................  -  07 x

32 Byte Granularity...........................  -  Disable(8 Bursts)

[/color]

 

 

 

==========

 

 

Orthos + 3dMark2001SE + CPU-Z x2:

cpuz3dmark2001orthoskm3.th.jpg

 

3dMark2003:

3dmark03tt3.th.jpg

 

3dMark2005:

3dmark05jx5.th.jpg

 

3dMark 2006:

3dmark06wg7.th.jpg

 

==========

 

short description:

246x11 @ 2706Mhz, CPU Vcore 1.375

3-3-3-7 @ 2.70v vdimm

Share this post


Link to post
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

Sign in to follow this  

×
×
  • Create New...