Guest Darien Posted July 2, 2006 Posted July 2, 2006 DFI NF4 LAN PARTY SLI-DR (OCZ Tony BIOS 704-2bta) AMD socket939 OPTERON 165 CCBBE 0610 DPMW DUAL CORE @ 3GHz (3006Mhz, 334x9) 2x512MB OCZ PC4800 Elites (OCZ6001024EEPE-K) 2 x eVGA nVidia 7800GTX in SLi 84.21 drivers, 450/1200 2 x Western Digital "Raptor" 10,000RPM SATA 74GB hdd in RAID-0 Plextor PX-716SA SATA DVD-RW OCZ Powerstream 520w Power Supply * * * * ========== [b]Genie BIOS Settings:[/b] [color=red] FSB Bus Frequency............................. - 334 LDT/FSB Frequency Ratio....................... - x3.0 CPU/FSB Frequency Ratio....................... - x9.0 PCI eXpress Frequency......................... - 100Mhz CPU VID StartUp Value......................... - 1.450v CPU VID Control............................... - 1.55v CPU VID Special Control....................... - 1.04% LDT Voltage Control........................... - 1.50v Chip Set Voltage Control...................... - 1.60v DRAM Voltage Control.......................... - 2.80v[/color] [b]DRAM Configuration Settings:[/b] [color=red] DRAM Frequency Set............................ - 180=RAM/FSB:09/10 Command Per Clock (CPC)....................... - Enable CAS Latency Control (Tcl)..................... - 2.5 RAS# to CAS# delay (Trcd)..................... - 5 Min RAS# active time (Tras)................... - 11 Row precharge time (Trp)...................... - 5 Row Cycle time (Trc).......................... - 17 Bus Clocks Row refresh cyc time (Trfc)................... - 19 Bus Clocks Row to Row delay (Trrd)....................... - 02 Bus Clocks Write recovery time (Twr)..................... - 03 Bus Clocks Write to Read delay (Twtr).................... - 02 Bus Clocks Read to Write delay (Trwt).................... - 04 Bus Clocks Refresh Period (Tref)......................... - 3120 Cycles DRAM Bank Interleave.......................... - Enabled DQS Skew Control.............................. - Auto DQS Skew Value................................ - 0 DRAM Drive Strength........................... - Auto DRAM Data Drive Strength...................... - Auto Max Async Latency............................. - 11 ns DRAM Response Time............................ - Normal Read Preamble Time............................ - 8.0 ns IdleCycle Limit............................... - 256 Cycles Dynamic Counter............................... - Disable R/W Queue Bypass.............................. - 16 x Bypass Max.................................... - 04 x 32 Byte Granularity........................... - Enable(4 Bursts) [/color] ========== Prime95 + 3dMark2001SE + CPU-Z + Everest 2.20: http://www.uploadfile.info/uploads/1926ba2a98.jpg http://www.uploadfile.info/uploads/50644ae4b3.jpg 3dMark2003: http://www.uploadfile.info/uploads/c2a2b1623d.jpg 3dMark2005: http://www.uploadfile.info/uploads/b07f4ffd82.jpg 3dMark 2006: http://www.uploadfile.info/uploads/3d67f5fe62.jpg ========== short description: 334x9 @ 3006Mhz, 1.584 vcore 300 MHz, 2.5-5-5-11, 1T @ 2.85 vdimm Share this post Link to post Share on other sites More sharing options...
Spacehead Posted July 3, 2006 Posted July 3, 2006 DFI LANPARTY nF4-D (704/2BTA BIOS) AMD Athlon 64 3500+ Venice CACAE 0612APMW 2x1024MB Buffalo Select CL3 PC3200 DD4003-1G/B Club3D GeForce 6800GS, 618/1202 81.98 drivers Seagate Barracuda 200GB 7200.7 SATA Samsung 160GB SP1614C SATA Antec Neo HE 430 * * * * ========== [b]Genie BIOS Settings:[/b] [color=red] FSB Bus Frequency............................. - 267 LDT/FSB Frequency Ratio....................... - 3x CPU/FSB Frequency Ratio....................... - 11x PCI eXpress Frequency......................... - 100Mhz CPU VID StartUp Value......................... - StartUp CPU VID Control............................... - 1.375v CPU VID Special Control....................... - Above VID * 110% LDT Voltage Control........................... - 1.30v Chip Set Voltage Control...................... - 1.60v DRAM Voltage Control.......................... - 2.90v[/color] [b]DRAM Configuration Settings:[/b] [color=red] DRAM Frequency Set............................ - 166=RAM/FSB:6/11 Command Per Clock (CPC)....................... - Enable CAS Latency Control (Tcl)..................... - 3 RAS# to CAS# delay (Trcd)..................... - 3 Min RAS# active time (Tras)................... - 5 Row precharge time (Trp)...................... - 3 Row Cycle time (Trc).......................... - 11 Bus Clocks Row refresh cyc time (Trfc)................... - 13 Bus Clocks Row to Row delay (Trrd)....................... - 02 Bus Clocks Write recovery time (Twr)..................... - 02 Bus Clocks Write to Read delay (Twtr).................... - 01 Bus Clocks Read to Write delay (Trwt).................... - 02 Bus Clocks Refresh Period (Tref)......................... - 2064 Cycles DRAM Bank Interleave.......................... - Enabled DQS Skew Control.............................. - Auto DQS Skew Value................................ - 0 DRAM Drive Strength........................... - normal 1 DRAM Data Drive Strength...................... - level 1 Max Async Latency............................. - 7 ns DRAM Response Time............................ - Fastest Read Preamble Time............................ - 5.0 ns IdleCycle Limit............................... - 0 Cycles Dynamic Counter............................... - Disable R/W Queue Bypass.............................. - 16 x Bypass Max.................................... - 07 x 32 Byte Granularity........................... - Disable(4 Bursts) [/color] ========== Prime95 + 3dMark2001SE + CPU-Z: http://spacehead.foppa.fi/OCDB/2937/prime9...rk2001cpuz2.jpg 3dMark2003 + Everest read: http://spacehead.foppa.fi/OCDB/2937/2003.jpg 3dMark2005 + Everest write: http://spacehead.foppa.fi/OCDB/2937/2005.jpg 3dMark 2006 + Everest latency: http://spacehead.foppa.fi/OCDB/2937/2006.jpg ========== short description: 267x11 @ 2937Mhz, 1.375 * 110% 3-3-5-3 @ 2.90v vdimm Share this post Link to post Share on other sites More sharing options...
cuoficr Posted July 5, 2006 Posted July 5, 2006 DFI LANPARTY nF4 Ultra-D (7/04-2BTA BIOS) AMD Opteron 148 CACJE 0601 2x1024MB OCZ PC4000EL (OCZ5002048ELGE-K) HIS X850XT IceQ 2, 540/1200 Omega 3.8.252 2xHitachi Deskstar 250gb SATA-II RAID-0 (HDT722525DLA380) ASUS CRW-4824AH SAMSUNG DVD-ROM SD-616E Antec TruePower 2.0 550w PSU ========== [b]Genie BIOS Settings:[/b] [color=red] FSB Bus Frequency............................. - 262 LDT/FSB Frequency Ratio....................... - 3x CPU/FSB Frequency Ratio....................... - Auto PCI eXpress Frequency......................... - 100Mhz CPU VID StartUp Value......................... - Startup CPU VID Control............................... - 1.525 CPU VID Special Control....................... - Auto LDT Voltage Control........................... - 1.20v Chip Set Voltage Control...................... - 1.60v DRAM Voltage Control.......................... - 2.60v[/color] [b]DRAM Configuration Settings:[/b] [color=red] DRAM Frequency Set............................ - 180=RAM/FSB:09/10 Command Per Clock (CPC)....................... - Auto CAS Latency Control (Tcl)..................... - 3 Bus Clocks RAS# to CAS# delay (Trcd)..................... - 4 Bus Clocks Min RAS# active time (Tras)................... - 8 Bus Clocks Row precharge time (Trp)...................... - 3 Bus Clocks Row Cycle time (Trc).......................... - 7 Bus Clocks Row refresh cyc time (Trfc)................... - Auto Row to Row delay (Trrd)....................... - 02 Bus Clocks Write recovery time (Twr)..................... - 02 Bus Clocks Write to Read delay (Twtr).................... - 02 Bus Clocks Read To Write Delay (tRTW).................... - 03 Bus Clocks Refresh Period (Tref)......................... - 3120 Cycles DRAM Bank Interleave.......................... - Enabled DQS Skew Control.............................. - Auto DQS Skew Value................................ - 0 DRAM Drive Strength........................... - Normal DRAM Data Drive Strength...................... - 1 Max Async Latency............................. - 7ns DRAM Response Time............................ - Fast Read Preamble Time............................ - Auto IdleCycle Limit............................... - 128 Cycles Dynamic Counter............................... - Disable R/W Queue Bypass.............................. - 16 x Bypass Max.................................... - 07 x 32 Byte Granularity........................... - Disable(4 Bursts) [/color] ========== Prime95 + 3dMark2001SE + CPU-Z: 3dMark2003: 3dMark2005: 3dMark 2006 + Everest Home v2.20.405 Memory Read: ========== short description: 262x11 @ 2882Mhz, 1.525 Vcore 3-4-8-3 240Mhz @ 2.60v vdimm Share this post Link to post Share on other sites More sharing options...
Guest dis Posted July 8, 2006 Posted July 8, 2006 LanParty UT nF4 Ultra-D (623-2 BIOS) Opteron 148 Venus CACJE 0601 OCZ Platinum Edition 2GB (2 x 1GB) OCZ5002048EBPE-K Sapphire X1800XT, 720/1602 6.3 Omega drivers 80GB Seagate Barracuda Memorex 16X double-layer drive Enermax 550Watt EG651P-VE ========== [b]Genie BIOS Settings:[/b] [color=red] FSB Bus Frequency............................. - 273 LDT/FSB Frequency Ratio....................... - X 4.0 CPU/FSB Frequency Ratio....................... - X 11.0 PCI eXpress Frequency......................... - 102Mhz CPU VID StartUp Value......................... - Startup CPU VID Control............................... - 1.45 CPU VID Special Control....................... - 110% LDT Voltage Control........................... - 1.20v Chip Set Voltage Control...................... - 1.50v DRAM Voltage Control.......................... - 2.80v[/color] [b]DRAM Configuration Settings:[/b] [color=red] DRAM Frequency Set............................ - 180=RAM/FSB:09/10 Command Per Clock (CPC)....................... - Enable CAS Latency Control (Tcl)..................... - 3.0 RAS# to CAS# delay (Trcd)..................... - 03 Min RAS# active time (Tras)................... - 07 Row precharge time (Trp)...................... - 02 Row Cycle time (Trc).......................... - 13 Bus Clocks Row refresh cyc time (Trfc)................... - 16 Bus Clocks Row to Row delay (Trrd)....................... - 03 Bus Clocks Write recovery time (Twr)..................... - 03 Bus Clocks Write to Read delay (Twtr).................... - 02 Bus Clocks Read to Write delay (Trwt).................... - 03 Bus Clocks Refresh Period (Tref)......................... - 3120 Cycles DRAM Bank Interleave.......................... - Enabled DQS Skew Control.............................. - Auto DQS Skew Value................................ - 0 DRAM Drive Strength........................... - Auto DRAM Data Drive Strength...................... - Auto Max Async Latency............................. - Auto DRAM Response Time............................ - Normal Read Preamble Time............................ - Auto IdleCycle Limit............................... - 256 Cycles Dynamic Counter............................... - Disable R/W Queue Bypass.............................. - 16 x Bypass Max.................................... - 04 x [/color] ========== Prime95 + 3dMark2001SE + CPU-Z : 3dMark2003: 3dMark2005: 3dMark 2006 + Everest 2.20: ========== short description: 273x11 @ 3003Mhz, 1.55v 3-3-7-2 @ 2.80v vdimm Share this post Link to post Share on other sites More sharing options...
d.justice Posted July 12, 2006 Posted July 12, 2006 DFI LANPARTY nF4 Ultra-D (1.0 rev.A3) (704-22v6)bigetoe tweaked 704-2a AMD operton 165 Toledo CCBBE 0617 2x1024MB OZC PC-4000 Gold GX XTC (OCZ5002048ELGEGXT-K) EVGA 7800GT 256MB w/ZALMAN VF900, 473/1200 84.43 Tweaks R'us driver 2xWestern digital raptor 74gb Raid0 (8MB cache) samsung spinpoint sp1614c 160gb(8MB cache) Hiper type-r 580w modular sli ready psu asus crw-4816a benq dual dw1610 16x thermaltake bigwater cl-w0005 ========== [b]Genie BIOS Settings:[/b] [color=red] FSB Bus Frequency - 334 LDT/FSB Frequency Ratio - x3.0 CPU/FSB Frequency Ratio - x9.0 PCI eXpress Frequency - 101Mhz CPU VID StartUp Value - 1.350v CPU VID Control - 1.400v CPU VID Special Control - Above VID * 110% LDT Voltage Control - 1.30v Chip Set Voltage Control - 1.60v DRAM Voltage Control - 2.60v[/color] [b]DRAM Configuration Settings:[/b] [color=red] DRAM Frequency Set - 150=RAM/FSB:03/04 Command Per Clock (CPC) - Enable CAS Latency Control (Tcl) - 3.0 RAS# to CAS# delay (Trcd) - 04 Bus Clocks Min RAS# active time (Tras) - 08 Bus Clocks Row precharge time (Trp) - 03 Bus Clocks Row Cycle time (Trc) - 11 Bus Clocks Row refresh cyc time (Trfc) - 16 Bus Clocks Row to Row delay (Trrd) - 03 Bus Clocks Write recovery time (Twr) - 02 Bus Clocks Write to Read delay (Twtr) - 02 Bus Clocks Read to Write delay (Trwt) - 03 Bus Clocks Refresh Period (Tref) - 3120 Cycles DRAM Bank Interleave - Enabled DQS Skew Control - Auto DQS Skew Value - 0 DRAM Drive Strength - NORMAL 3 DRAM Data Drive Strength - Level 2 Max Async Latency - 8.0 Nano Seconds DRAM Response Time - Normal Read Preamble Time - 6.0 Nano Seconds IdleCycle Limit - 256 Cycles Dynamic Counter - Disable R/W Queue Bypass - 16 x Bypass Max - 07 x 32 Byte Granularity - Disable(4 Bursts) [/color] ========== Prime95 + 3dMark2001SE + CPU-Z 1.35: http://home.broadpark.no/~stiadahl/OCDB1.jpg 3dMark2003: http://home.broadpark.no/~stiadahl/OCDB2.JPG 3dMark2005: http://home.broadpark.no/~stiadahl/OCDB3.jpg 3dMark2006: http://home.broadpark.no/~stiadahl/OCDB4.JPG everest home v2.20: http://home.broadpark.no/~stiadahl/OCDB5-1.JPG http://home.broadpark.no/~stiadahl/OCDB5-2.JPG http://home.broadpark.no/~stiadahl/OCDB5-3.jpg ========== short description: 334x9 @ 3006Mhz, 1.400v + 110% 3.0-4-8-3 @ 2.69v vdimm Share this post Link to post Share on other sites More sharing options...
pharmd24 Posted July 14, 2006 Posted July 14, 2006 DFI RS482 INFINITY (5/04/2006 Beta BIOS) AMD Opteron 146 Venus 1MB L2 4x512MB PC3200 Ballistix ATI x850XT PE 256mb, 540/590 omega 3.8.231 2x120gb Samsung SATA HD NEC 3550A Black IDE DVD-RW Drive Antec TRUEPOWERII TPII-550 550W Power Supply ========== [b]Genie BIOS Setting:[/b] [color=red] DLL Speed Override............................ - Disable DLL Speed..................................... - High CPU/FSB Ratio Setting......................... - x10 CPU'n'NB Bus Ratio SEtting.................... - x4 800 MHz CPU Clock Setting............................. - 250 O.C. Failed Control........................... - Enable DRAM Clock Setting............................ - 1/1 PCIE Clock Setting............................ - 100MHz CPU Voltage Setting........................... - 1.4v DRAM Voltage Setting.......................... - 2.7v NB and HT Voltage Setting..................... - 1.2v NB-SB Link Voltage Setting.................... - 1.8v Auto Detect PCI Clk........................... - Enabled Spread Spectrum............................... - Disabled [/color] [b]DRAM timing and Config:[/b] [color=red] CAS latency(tCL).............................. - 2.5 Min RAS active time(tRAS)..................... - 8T RAS to CAS delay(tRCD)........................ - 3T Row precharge Time(tRP)....................... - 3T Row to Row delay(tRRD)........................ - 3T Row Cycle time(tRC)........................... - 8T Row refresh CYC Time(tRFC).................... - 15T Read to Write time(tRWT)...................... - 3T Refresh Rate(tREF)............................ - 3120 Cycles Write to Read Delay(tWTR)..................... - 2 Bus Clocks Write recovery Time tWR)...................... - 3 Bus Clocks 1T/2T Memory Timing........................... - 2T Read Preamble value........................... - 5.5ns Async Latency value........................... - 8ns DRAM Drive Strength........................... - Normal Dram Drive Strength Ratio..................... - x1.28 DRAM DQ Drive Strength........................ - 70 % DQS Hysteresis................................ - Auto Read and Write Queue Bypass................... - count 16 Dynamic Idle Cycle Counter.................... - Disabled Idle Cycle Limit.............................. - 16 Cycles Bypass Max.................................... - 7 Times Odd Divisor Correct........................... - Disabled Dual DIMM..................................... - Auto Disable Jitter................................ - Auto DRAM Bank Interleave.......................... - Enabled Burst Length.................................. - 4 beats Enable AllDIMM slots clock.................... - Enabled MTRR mapping mode............................. - Continuous PDL Delay Adjust.............................. - Auto [/color] [b]System Bus Configuration:[/b] [color=red] HT Link Configuration......................... - Enabled Upstream LDT Bus Width........................ - 16 bit Downstream LDT Bus Width...................... - 16 bit [/color] ========== Prime95 + 3dMark2001SE + CPU-Z 1.33 + Everest Memory Read: 23h31m + 26797 + CPUZ + 6380 3dMark2003: 3dMark2005: 3dMark2006: ========== short description: 250x10 @ 2500Mhz, 1.4v 2.5-3-8-3 @ 2.7v vdimm Share this post Link to post Share on other sites More sharing options...
kitfit1 Posted July 18, 2006 Posted July 18, 2006 DFI LANPARTY nF4 SLI-DR (04/06/06 BIOS) AMD OPTY 170 (CCBWE 0551UPMW) 2x512MB OCZ EL DDR PC-4800 Platinum Elite Edition ( PN – OCZ600512EEPE ) X1900 XT-X@689/797, CAT 6.6 DRIVERS 2X36GB Western Digital Raptor 10,000RPM SATA hdd RAID 0 LITEON 832S DVD R/W HIPER 580 MODULAR PSU * * * * ========== [b]Genie BIOS Settings:[/b] [color=red] FSB Bus Frequency............................. - 300 LDT/FSB Frequency Ratio....................... - 3 CPU/FSB Frequency Ratio....................... - 10 PCI eXpress Frequency......................... - 105MHZ CPU VID StartUp Value......................... - 1.550v CPU VID Control............................... - 1.325 CPU VID Special Control....................... - 123% LDT Voltage Control........................... - 1.30v Chip Set Voltage Control...................... - 1.50v DRAM Voltage Control.......................... - 2.80v[/color] [b]DRAM Configuration Settings:[/b] [color=red] DRAM Frequency Set............................ - 200=RAM/FSB:01/01 Command Per Clock (CPC)....................... - Enable CAS Latency Control (Tcl)..................... - 2.5 RAS# to CAS# delay (Trcd)..................... - 4 Min RAS# active time (Tras)................... - 6 Row precharge time (Trp)...................... - 3 Row Cycle time (Trc).......................... - 7 Bus Clocks Row refresh cyc time (Trfc)................... - 19 Bus Clocks Row to Row delay (Trrd)....................... - 02 Bus Clocks Write recovery time (Twr)..................... - 02 Bus Clocks Write to Read delay (Twtr).................... - 02 Bus Clocks Read to Write delay (Trwt).................... - 03 Bus Clocks Refresh Period (Tref)......................... - 3120 Cycles DRAM Bank Interleave.......................... - Enabled DQS Skew Control.............................. - Auto DQS Skew Value................................ - 0 DRAM Drive Strength........................... - 7 DRAM Data Drive Strength...................... - 4 Max Async Latency............................. - 8 DRAM Response Time............................ - fast Read Preamble Time............................ - 6.5 IdleCycle Limit............................... - 256 Cycles Dynamic Counter............................... - Enabled R/W Queue Bypass.............................. - 16 x Bypass Max.................................... - 07 x 32 Byte Granularity........................... - Disable(4 Bursts) [/color] ========== Prime95 + 3dMark2001SE: 3dMark2003: 3dMark2005: 3dMark 2006: Everest Read: ========== short description: 300x10 @ 3000Mhz, Mach2 GT cooling Share this post Link to post Share on other sites More sharing options...
reg_pfj Posted July 18, 2006 Posted July 18, 2006 DFI LANPARTY nF4 Ultra-D - 6/23/05 BIOS AMD Opteron 146 Venus CABYE 0540 FPMW 2x512MB OCZ4001024WV3DC-K msi 7800GTX 256MB, 84.21 drivers WD740GD 74Gb hard drive COOLER MASTER RS-450-ACLY * * * * ========== Genie BIOS Settings: [color=red] FSB Bus Frequency - 305 LDT/FSB Frequency Ratio - auto CPU/FSB Frequency Ratio - auto PCI eXpress Frequency - 100Mhz CPU VID StartUp Value - 1.400v CPU VID Control - 1.500v CPU VID Special Control - x 1.1 LDT Voltage Control - 1.20v Chip Set Voltage Control - 1.50v DRAM Voltage Control - 3.10v[/color] [b]DRAM Configuration Settings:[/b] [color=red] DRAM Frequency Set - 150 (DRAM/FSB:03/04) Command Per Clock (CPC) - Enable CAS Latency Control (Tcl) - 2.0 RAS# to CAS# delay (Trcd) - 02 Min RAS# active time (Tras) - 07 Row precharge time (Trp) - 02 Row Cycle time (Trc) - auto Row refresh cyc time (Trfc) - auto Row to Row delay (Trrd) - auto Write recovery time (Twr) - auto Write to Read delay (Twtr) - auto Read to Write delay (Trwt) - auto Refresh Period (Tref) - auto Write CAS Latency (Twcl) - auto DRAM Bank Interleave - enabled DQS Skew Control - auto DQS Skew Value - 0 DRAM Drive Strength - auto DRAM Data Drive Strength - auto Max Async Latency - auto DRAM Response Time - normal Read Preamble Time - auto IdleCycle Limit - 256 Dynamic Counter - disable R/W Queue Bypass - 16x Bypass Max - 07x 32 Byte Granularity - Disable 4 bursts [/color] ========== Prime95 x2 + 3dMark2001SE + CPU-Z 1.32 + Everest 2.20: 3dMark2003: 3dMark2005: 3dMark2006: ========== short description: 305 x 10, 1.50V + 10% 2-2-7-2 @ 3.1V vdimm Share this post Link to post Share on other sites More sharing options...
Lazerus Posted July 18, 2006 Posted July 18, 2006 DFI LANPARTY nF4 SLI-DR (7/04-2BTA BIOS) AMD Opteron 165 Dual core (ccb1e 0609 fpmw) 2x1024MB OCZ PC4000 (OCZ5002048ELGEGXT-K) eVGA GeForce 7900GT KO, 551/1690 Hitachi DStar 7k80 x2 raid-0 32k stripe Dvd: NEC black 3550 OCZ GameXstream 700 watt * * * * ========== [b]Genie BIOS Settings:[/b] [color=red] FSB Bus Frequency............................. 300 MHz LDT/FSB Frequency Ratio....................... x3 pci ............................................16/16 CPU/FSB Frequency Ratio....................... 9 PCI eXpress Frequency......................... 100 CNQ ........................................ Disabled CPU VID ................................Startup CPU Voltage .................................. 1.325v CPU VID Special.................................x 110% LDT Voltage .................................. 1.20v ChipSet (NF4) Voltage ........................ 1.50V DRAM Voltage ................................. 2.60v <-- Deviant +0.03 if not 3.2V ............................ enabled Memclock (DRAM Frequency) .................... 166 (5/6) 1T/2T Timing (Command Per Clock).............. Enabled (1T) CAS Latency (Tcl)............................. 3T RAS# to CAS# delay (Trcd)..................... 4T Min RAS# active time (Tras)................... 8T Row precharge time (Trp)...................... 5T <--- Deviant Row Cycle time (Trc).......................... 12T Row refresh cyc time (Trfc)................... 16T Row to Row delay (Trrd)....................... 3T Write recovery time (Twr)..................... 3T Write to Read delay (Twtr).................... 2T Read to Write delay (Trwt).................... 3T Refresh Period (Tref)......................... 3120 Write CAS Latency(Twcl)........................ AUTO ( A64Tweaker read as 1 clk) DRAM Bank Interleave.......................... Enabled Not in bios but A64 said DLL speed ........... "Enabled" DQS Skew Control.............................. Auto ( A64 said off) DQS Skew Value................................ 0 DRAM Drive Strength........................... AUTO (A64 said normal) DRAM Data Drive Strength...................... AUTO ( unknown..no listing in A64) Max Async Latency............................. AUTO (A64= 9) <-- Deviant DRAM Response Time............................ Normal Read Preamble Time............................ AUTO ( A64 = 7.5) <-- Deviant IdleCycle Limit............................... 256 Dynamic Counter............................... Disable R/W Queue Bypass.............................. 16x Bypass Max.................................... 4x <-- Deviant 32 Byte Granularity........................... Disable (4 Bursts) [/color] ========== Link: Prime95 + 3dMark2001SE + CPU-Z + Everest 2.20 3dMark2001SE + CPU-Z + Everest 2.20 Updated with new GPU OC: [ATTACH]4941[/ATTACH] 3dMark2003 + A64Tweaker: [ATTACH]4942[/ATTACH] 3dM05: [ATTACH]4943[/ATTACH] 3dM06: [ATTACH]4944[/ATTACH] ========== short description: 300x9 @ 2700Mhz, 1.4575 cpu voltage 3-4-8-5 @ 2.63v vdimm Share this post Link to post Share on other sites More sharing options...
maka_RTH Posted July 21, 2006 Posted July 21, 2006 DFI LanpartyUT nF4 Ultra-D (0406BTA) AMD Athlon 64 3700+ San Diego 2x512MB Crucial Ballistix PC4000 (BL2KIT6464Z505) eVGA GeForce 7600GT, 580/1600 91.31 drivers 120GB Western Digital 7200rpm IDE hdd Lite-On 52x CD-ReWriter Enermax Liberty 500w Power Supply * * ========== [b]Genie BIOS Settings:[/b] [color=red] FSB Bus Frequency............................. - 280 LDT/FSB Frequency Ratio....................... - 3x CPU/FSB Frequency Ratio....................... - 10 PCI eXpress Frequency......................... - 100Mhz CPU VID StartUp Value......................... - Startup CPU VID Control............................... - 1.500v CPU VID Special Control....................... - Auto LDT Voltage Control........................... - 1.20v Chip Set Voltage Control...................... - 1.60v DRAM Voltage Control.......................... - 3.00v[/color] [b]DRAM Configuration Settings:[/b] [color=red] DRAM Frequency Set............................ - 200=RAM/FSB:01/01 Command Per Clock (CPC)....................... - Enable CAS Latency Control (Tcl)..................... - 2.5 RAS# to CAS# delay (Trcd)..................... - 3 Min RAS# active time (Tras)................... - 8 Row precharge time (Trp)...................... - 3 Row Cycle time (Trc).......................... - 11 Bus Clocks Row refresh cyc time (Trfc)................... - 14 Bus Clocks Row to Row delay (Trrd)....................... - 02 Bus Clocks Write recovery time (Twr)..................... - 02 Bus Clocks Write to Read delay (Twtr).................... - 02 Bus Clocks Read to Write delay (Trwt).................... - 02 Bus Clocks Refresh Period (Tref)......................... - 3120 Cycles DRAM Bank Interleave.......................... - Enabled DQS Skew Control.............................. - Auto DQS Skew Value................................ - 0 DRAM Drive Strength........................... - Auto DRAM Data Drive Strength...................... - Auto Max Async Latency............................. - Auto DRAM Response Time............................ - Normal Read Preamble Time............................ - Auto IdleCycle Limit............................... - 256 Cycles Dynamic Counter............................... - Disable R/W Queue Bypass.............................. - 16 x Bypass Max.................................... - 07 x 32 Byte Granularity........................... - Disable(4 Bursts) [/color] ========== Prime95 + 3dMark2001SE + CPU-Z + Everest 2.20: http://www.maka-rth.com/pics/OCstuff/OCDB1.jpg 3dMark2003: 3dMark2005: 3dMark 2006: Everest 2.20 ========== short description: 280x10 @ 2800Mhz, 1.500v 2.5-3-3-8 @ 3.00v vdimm Share this post Link to post Share on other sites More sharing options...
s10man69 Posted July 22, 2006 Posted July 22, 2006 DFI LANPARTY CFX3200-DR (05/23/2006 BIOS) AMD Opteron 165 CCBBE 0610 2 x 1MB L2 2 x 1GB OCZ Platinum Edition DDR500 3-3-2-8 OCZ5002048EBPE-K ATI X1900XTX & Sapphire X1900 Crossfire Edition, STOCK SPEEDS Catalyst 6.6 Drivers 4 x 74GB Western Digital Raptor 10,000RPM SATA HDD's Sony Black IDE DVD-RW Drive OCZ GameXStream 700W Power Supply * * * * ========== [b]Genie BIOS Settings:[/b] [color=red] FSB Bus Frequency............................. - 334 RD580 HT PLL High Speed....................... - High Speed LDT/FSB Frequency Ratio....................... - x4 CPU/FSB Frequency Ratio....................... - x9 HT Bus NMos Drive Strength.................... - 31 HT Bus PMos Drive Strength.................... - 31 HT Bus Reciever Impedance..................... - 31 CPU HT Bus Drive Strength..................... - Strong CPU VID Control............................... - 1.325 CPU VID Special Control....................... - Above VID * 117.3% DRAM Voltage Control.......................... - 2.58v SB PCIE Voltage............................... - 1.85v NB Analog Voltage............................. - 1.34v LDT Bus Voltage............................... - 1.34v NB Core Voltage............................... - 1.34v [/color] [b]DRAM Configuration Settings:[/b] [color=red] DRAM Frequency Set............................ - 150=RAM/FSB:03/04 Command Per Clock (CPC)....................... - Enable CAS Latency Control (Tcl)..................... - 3.0 Bus Clocks RAS# to CAS# delay (Trcd)..................... - 03 Bus Clocks Min RAS# active time (Tras)................... - 08 Bus Clocks Row precharge time (Trp)...................... - 02 Bus Clocks Row Cycle time (Trc).......................... - 10 Bus Clocks Row refresh cyc time (Trfc)................... - 16 Bus Clocks Row to Row delay (Trrd)....................... - 03 Bus Clocks Write recovery time (Twr)..................... - 03 Bus Clocks Write to Read delay (Twtr).................... - 02 Bus Clocks Read to Write delay (Trwt).................... - 03 Bus Clocks Refresh Period (Tref)......................... - 1560 Cycles DRAM Bank Interleave.......................... - Enabled Errata 94 Enhancement......................... - Disable Errata 123 Enhancement........................ - Auto Odd Divisor Correct........................... - Disable DQS Skew Control.............................. - Auto DQS Skew Value................................ - 0 DRAM Drive Strength........................... - Level 6 DRAM Data Drive Strength...................... - Level 1(Reduce 50%) DIMM 1/3 Clock Timing Skew.................... - Auto DIMM 2/4 Clock Timing Skew.................... - Delay 450 ps Max Async Latency............................. - 8.0 ns Read Preamble Time............................ - 5.5 ns IdleCycle Limit............................... - 64 Cycles Dynamic Counter............................... - Disable R/W Queue Bypass.............................. - 16 x Bypass Max.................................... - 4 x [/color] ========== Prime95 + 3dMark2001SE + CPU-Z: 3dMark2003: 3dMark2005: 3dMark2006: Everest Memory Read BenchMark: ========== Short Description: 334x9 @ 3006Mhz, 1.554v 3.0-3-2-8 @ 2.58v vdimm Share this post Link to post Share on other sites More sharing options...
Guest laydback Posted July 22, 2006 Posted July 22, 2006 DFI Lanparty UT NF4 Ultra-D R.AB0 704-2bta AMD Opteron 146 CAB2E 0540FPMW 2x512 G-Skill PC4400 F1-4400DSU2-1GBFC TCCD 0519 ATI x1900AIW, NGO Optimized Driver 6.6 250gb Western Digital Diamondmax 10 ATA133 80gb Seagate Barracuda SATA FSP Group FX700-GLN ATX12V 700W PSU Cooled By: Dangerden DDC12v,MAZE4GPU,Dual bay res,BlackIce Pro Rad,Swiftech Apogee,2x120mm Heatercore Thermaltake Armor Black Viewsonic 19" LCD - VA912b Compaq 17" LCD - TFT7020 Logitech X-530 Surround * * ========== [b]Genie BIOS Settings:[/b] [color=red] FSB Bus Frequency............................. - 310 LDT/FSB Frequency Ratio....................... - 1x CPU/FSB Frequency Ratio....................... - 10x PCI eXpress Frequency......................... - 100Mhz CPU VID StartUp Value......................... - Startup CPU VID Control............................... - 1.50 CPU VID Special Control....................... - x110% LDT Voltage Control........................... - 1.20v Chip Set Voltage Control...................... - 1.50v DRAM Voltage Control.......................... - 2.80v[/color] [b]DRAM Configuration Settings:[/b] [color=red] DRAM Frequency Set............................ - 200=RAM/FSB:01/01 Command Per Clock (CPC)....................... - Enable CAS Latency Control (Tcl)..................... - 2.5 RAS# to CAS# delay (Trcd)..................... - 4 Min RAS# active time (Tras)................... - 8 Row precharge time (Trp)...................... - 4 Row Cycle time (Trc).......................... - 12 Bus Clocks Row refresh cyc time (Trfc)................... - 24 Bus Clocks Row to Row delay (Trrd)....................... - 03 Bus Clocks Write recovery time (Twr)..................... - 03 Bus Clocks Write to Read delay (Twtr).................... - 02 Bus Clocks Read to Write delay (Trwt).................... - 03 Bus Clocks Refresh Period (Tref)......................... - 3072 Cycles DRAM Bank Interleave.......................... - Enabled DQS Skew Control.............................. - Auto DQS Skew Value................................ - 0 DRAM Drive Strength........................... - Weak 4 DRAM Data Drive Strength...................... - 1 (50%) Max Async Latency............................. - 10 DRAM Response Time............................ - Normal Read Preamble Time............................ - 7 IdleCycle Limit............................... - 256 Cycles Dynamic Counter............................... - Disable R/W Queue Bypass.............................. - 16 x Bypass Max.................................... - 07 x 32 Byte Granularity........................... - Disable(4 Bursts) [/color] ========== Prime95 + 3dMark2001SE + CPU-Z + Everest 2.20: 3dMark2003: 3dMark2005: 3dMark 2006: ========== short description: 310x10, 3100mhz, 1.60vcore 2.5-4-4-8, 1:1, 2.80vdimm Share this post Link to post Share on other sites More sharing options...
Recommended Posts
Please sign in to comment
You will be able to leave a comment after signing in
Sign In Now