l3lackh0le Posted June 9, 2006 Posted June 9, 2006 DFI LANPARTY nF4 SLI-DR - 704-2bta BIOS AMD Opteron 165 dual core CCBBE 0610DPMW OCZ 2GB (2 x 1GB) 184-Pin DDR SDRAM Dual Channel Platinum Model #: OCZ4002048ELDCPE-K Leadtek 7800GTX 256MB, 480mhz/1.25ghz Western Digital Raptor 74GB 3.5" Serial ATA150 Hard Drive NEC 16X DVD±R DVD Burner Black IDE/ATAPI Model ND-3550A flashed to 4551a OCZ PowerStream OCZ600ADJ ATX 600W Power Supply - Retail Zalman cnps9500 led cpu cooler * * ========== Genie BIOS Settings: FSB Bus Frequency - 315 LDT/FSB Frequency Ratio - x 3.0 CPU/FSB Frequency Ratio - x 9.0 PCI eXpress Frequency - 100Mhz CPU VID StartUp Value - 1.350v CPU VID Control - 1.2v CPU VID Special Control - Above VID * 110% LDT Voltage Control - 1.20v Chip Set Voltage Control - 1.50v DRAM Voltage Control - 2.80v DRAM Configuration Settings: DRAM Frequency Set - 150=RAM/FSB:03/04 Command Per Clock (CPC) - Enable CAS Latency Control (Tcl) - 2.5 RAS# to CAS# delay (Trcd) - 03 Bus Clocks Min RAS# active time (Tras) - 05 Bus Clocks Row precharge time (Trp) - 03 Bus Clocks Row Cycle time (Trc) - 09 Bus Clocks Row refresh cyc time (Trfc) - 12 Bus Clocks Row to Row delay (Trrd) - 03 Bus Clocks Write recovery time (Twr) - 02 Bus Clocks Write to Read delay (Twtr) - 02 Bus Clocks Read to Write delay (Trwt) - 02 Bus Clocks Refresh Period (Tref) - 1168 Cycles Write CAS Latency (Twcl) - Auto DRAM Bank Interleave - Enabled DQS Skew Control - Auto DQS Skew Value - 0 DRAM Drive Strength - normal 4 DRAM Data Drive Strength - Level 2 Max Async Latency - 8.0 Nano Seconds DRAM Response Time - normal Read Preamble Time - 6.0 Nano Seconds IdleCycle Limit - 256 Cycles Dynamic Counter - Disable R/W Queue Bypass - 16 x Bypass Max - 04 x 32 Byte Granularity - Disable(4 Bursts) ========== dual Prime95 + 3dMark2001SE + CPU-Z 1.29 + Everest memory read: everest memory latency + 3dMark2003 + mbm5: Everest memory write + 3dMark2005 + a64info + mbm5: ========== short description: max @ stock voltage 315*9 @ 2835mhz @ 1.200v + 110% 2.2-3-3-5 @ 2.8v vdimm Share this post Link to post Share on other sites More sharing options...
LurksAtDFI_St Posted June 10, 2006 Posted June 10, 2006 DFI LANPARTY UT nF4 SLI-DR Expert - 12/07/05 BIOS AMD Opteron 148 Venus CABNE 0528GPMW (2 x1GB) G.SKILL DDR 500 (PC 4000) F1-4000USU2-2GBHZ UCCC Sapphire X800GTO^2 16p 256MB, 400/980 Cat 6.4drivers 2 x Maxtor 6B200RO 200GB IDE hdd (16MB cache) Lite-On 52327S White IDE CD-ROM Drive NEC 16X White DVD Burner 3550A Chaintech AV-710 Envy24 HT-S - 4.73b OCZ PowerStream OCZ520ADJ ATX 520W PSU * * ========== Genie BIOS Settings: FSB Bus Frequency - 285 LDT/FSB Frequency Ratio - 3X CPU/FSB Frequency Ratio - 10 PCI eXpress Frequency - 100Mhz CPU VID StartUp Value - 1.400v CPU VID Control - 1.400v CPU VID Special Control - Auto LDT Voltage Control - 1.20v Chip Set Voltage Control - 1.59v DRAM Voltage Control - 2.60v DRAM Configuration Settings: DRAM Frequency Set - 200=RAM/FSB:01/01 Command Per Clock (CPC) - Enable CAS Latency Control (Tcl) - 03 Bus Clocks RAS# to CAS# delay (Trcd) - 04 Bus Clocks Min RAS# active time (Tras) - 08 Bus Clocks Row precharge time (Trp) - 04 Bus Clocks Row Cycle time (Trc) - 07 Bus Clocks Row refresh cyc time (Trfc) - 13 Bus Clocks Row to Row delay (Trrd) - 02 Bus Clocks Write recovery time (Twr) - 02 Bus Clocks Write to Read delay (Twtr) - 02 Bus Clocks Read to Write delay (Trwt) - 03 Bus Clocks Refresh Period (Tref) - 3684 Cycles Write CAS Latency (Twcl) - 1 DRAM Bank Interleave - Enabled DQS Skew Control - Auto DQS Skew Value - 0 DRAM Drive Strength - Level 3 DRAM Data Drive Strength - Auto (Reports Level 1-Reduce 50% in Everest) Max Async Latency - 8.0 Nano Seconds DRAM Response Time - Fastest Read Preamble Time - 5.0 Nano Seconds IdleCycle Limit - 16 Cycles Dynamic Counter - Disable R/W Queue Bypass - 8 x Bypass Max - 04 x 32 Byte Granularity - Disable(4 Bursts) ========== Prime95 + 3dMark2001SE + CPU-Z 1.33.1 + Everest 2.20 Read: http://img132.imageshack.us/img132/5762/link19xf.png 3dMark2003 + CPU-Z 1.33.1 + Everest 2.20 Write: 3dMark2005 + CPU-Z 1.33.1 + Everest 2.20 Memory Latency: Aquamark 3d: ========== short description: 285x10 @ 2850Mhz @ 1.400v/1.400v 3-4-4-8 @ 2.60v vdimm Share this post Link to post Share on other sites More sharing options...
JimJones586 Posted June 10, 2006 Posted June 10, 2006 DFI LANPARTY UT CFX3200-DR (5/23 Beta Bios) AMD Opteron 165 2x1gb OCZ PlatinumEB PC-4000 Sapphire Radeon x1900xt, 621/720 - Catalyst 6.5 Drivers 2x80gb Hitachi Deskstar (Raid-0) NEC 16X DVD±R DVD Burner OCZ GameXstream 600w PSU * * ========== [b]Genie BIOS Settings:[/b] [color=red] FSB Bus Frequency............................. - 290 LDT/FSB Frequency Ratio....................... - x 3.0 CPU/FSB Frequency Ratio....................... - x 9.0 RD580 HT PLL Speed............................ - High Speed HT Bus MMOS Drive Strength.................... - 05 HT Bus PMOS Drive Strength.................... - 05 HT Bus Receiever Impedance.................... - 05 CPU HT Bus Drive Strength..................... - Strong CPU VID Control............................... - 1.375v CPU VID Special Control....................... - Above VID * 102.9% DRAM Voltage Control.......................... - 2.67v SB PCIE Voltage............................... - 1.80v NB Analog Voltage............................. - 1.21v LDT Bus Voltage............................... - 1.21v NB Core Voltage............................... - 1.21v [/color] [b]DRAM Configuration Settings:[/b] [color=red] DRAM Frequency Set............................ - 183=RAM/FSB:09/10 Command Per Clock (CPC)....................... - Enable CAS Latency Control (Tcl)..................... - 3.0 Bus Clocks RAS# to CAS# delay (Trcd)..................... - 03 Bus Clocks Min RAS# active time (Tras)................... - 08 Bus Clocks Row precharge time (Trp)...................... - 02 Bus Clocks Row Cycle time (Trc).......................... - 08 Bus Clocks Row refresh cyc time (Trfc)................... - 14 Bus Clocks Row to Row delay (Trrd)....................... - 00 Bus Clocks Write recovery time (Twr)..................... - 02 Bus Clocks Write to Read delay (Twtr).................... - 02 Bus Clocks Read to Write delay (Trwt).................... - 02 Bus Clocks Refresh Period (Tref)......................... - 3120 Cycles DRAM Bank Interleave.......................... - Enabled Errata 94 Enhancement......................... - Disable Errata 123 Enhancement........................ - Auto Odd Divisor Correct........................... - Disable DQS Skew Control.............................. - Auto DQS Skew Value................................ - 0 DRAM Drive Strength........................... - Level 8 DRAM Data Drive Strength...................... - Auto DIMM 1/3 Clock Timing Skew.................... - Auto DIMM 2/4 Clock Timing Skew.................... - Auto Max Async Latency............................. - 8.0 ns Read Preamble Time............................ - 5.0 ns IdleCycle Limit............................... - 16 Cycles Dynamic Counter............................... - Disable R/W Queue Bypass.............................. - 16 x Bypass Max.................................... - 5 x Burst Length.................................. - 4 Bursts [/color] ========== Dual Prime95 + CPU-Z + Everest Memory Read + 3dMark2001se * CPU-Z + Everest Memory Latency + 3dMark2003 * A64info + 3dMark2005 ========== short description: 290x9 @ 2609Mhz, 1.375v + 102.9% 3.0-3-2-8 @ 2.67v vdimm Share this post Link to post Share on other sites More sharing options...
SeanDude05 Posted June 10, 2006 Posted June 10, 2006 DFI LANPARTY nF4 SLI-DR Expert - 04/06/2006 BIOS AMD Athlon64 FX-57 San Diego - CAB2E 0533SPMW 2x1024Mb G.Skill HZ PC4000 (UCCC) (2)XFX 7900GTXs in SLI, 685/1760 84.21 Forceware drivers (2)WD 10,000rpm Raptor 36Gb in RAID0; 3x300Gb Maxtor DM10s HP DVD740i Lightscribe DVD Burner OCZ GameXStream OCZ700GXSSLI ATX12V 700W Power Supply - Retail * * ========== Genie BIOS Settings: FSB Bus Frequency - 273Mhz LDT/FSB Frequency Ratio - x3 CPU/FSB Frequency Ratio - x11 PCI eXpress Frequency - 101Mhz CPU VID StartUp Value - 1.475v CPU VID Control - 1.425v CPU VID Special Control - Above VID * 109.6% LDT Voltage Control - 1.30v Chip Set Voltage Control - 1.56v DRAM Voltage Control - 2.68v DRAM Configuration Settings: DRAM Frequency Set - 200=RAM/FSB:01/01 Command Per Clock (CPC) - Enable CAS Latency Control (Tcl) - 03 Bus Clocks RAS# to CAS# delay (Trcd) - 04 Bus Clocks Min RAS# active time (Tras) - 08 Bus Clocks Row precharge time (Trp) - 04 Bus Clocks Row Cycle time (Trc) - 07 Bus Clocks Row refresh cyc time (Trfc) - 16 Bus Clocks Row to Row delay (Trrd) - 02 Bus Clocks Write recovery time (Twr) - 02 Bus Clocks Write to Read delay (Twtr) - 02 Bus Clocks Read to Write delay (Trwt) - 03 Bus Clocks Refresh Period (Tref) - 3120 Cycles Odd Divisor - Disabled DRAM Bank Interleave - Enabled DQS Skew Control - Auto DQS Skew Value - 0 DRAM Drive Strength - Auto DRAM Data Drive Strength - Auto Max Async Latency - 8.0 Nano Seconds DRAM Response Time - Fast Read Preamble Time - Auto IdleCycle Limit - 128 Cycles Dynamic Counter - Disable R/W Queue Bypass - 16 x Bypass Max - 04 x 32 Byte Granularity - Disable(4 Bursts) ========== Prime95 + 3dMark2001SE + CPU-Z 1.34.1 + Everest Home Read: 3dMark2003 + CPU-Z 1.34.1 + SuperPi 1M: 3dMark2005 + CPU-Z 1.34.1: Prime Temps: CPU-Z Verified: ID# 99305 ========== short description: 273x11 @ 3003Mhz, 1.425v + 109.6% DDR550 @ 3-4-8-4-1T @ 2.68v vDimm Share this post Link to post Share on other sites More sharing options...
Praz Posted June 10, 2006 Posted June 10, 2006 LANPARTY UT NF4 SLI-DR Venus - 03/07/06 BIOS AMD Opteron 165 CCBBE0610DPMW Mushkin eXtreme Performance 2GB (2 x 1GB) Redline HIS Radeon X1900 XT IceQ3, 680/810 Stock Voltage, Omega 3.8.252 drivers Hitachi Deskstar T7K250 160GB Serial ATA II 7200RPM Hard Drive w/8MB Buffer x 2 RAID 0 Maxtor Maxline III 7L300S0 300GB Serial ATA 1.5Gb 7200RPM Hard Drive w/16MB Buffer Liteon SOHW-1693S 16X Dual Layer DVD±RW Drive (Black) OCZ GameXStream OCZ700GXSSLI ATX12V 700W Power Supply Swiftech STORM Extreme Performance Universal Water-block - Rev 2 Swiftech MCP655 Pump Black Ice Pro III Triple 120mm Radiator With D12SL-12 YATE LOON 120mm Case Fans Chipset Cooled By Evercool VC-RE VGACooler Zalman VF700-CU VGA Cooler [b]Genie BIOS Settings:[/b] [color=navy] FSB Bus Frequency..................... 339 LDT/FSB Frequency Ratio............... 3.0x CPU/FSB Frequency Ratio............... 9x PCI Express Frequency................. 100 CPU VID Startup Value................. 1.350 CPU VID Control....................... 1.525 VID Special Control................... 104.8% LDT Voltage Control................... 1.20V Chip Set Voltage Control.............. 1.52v Dram Voltage Control.................. 2.64v[/color] [b]DRAM Configuration Settings:[/b] [color=darkgreen] Dram Frequency Set (Mhz).............. 150=RAM/FSB:03/04 Command Per Clock (CPC)............... Enable CAS# latency (Tcl).................... 3.0 RAS# to CAS# delay (Trcd)............. 03 Min RAS# active time (Tras)......... . 00 Row Precharge Time (Trp).............. 02 Row Cycle Time (Trc).................. 07 Row refresh timg (Trfc)............... 13 RAS# to RAS# delay (Trrd)............. 00 Write Recovery Time (Twr)............. 02 Wite-to-Read Delay (Twtr)............. 01 Read-to-Write Delay (Trwt)............ 02 Refresh Rate (Tref)................... 3120 Cycles Write CAS Latency (Twcl)...............01 DRAM Bank Interleaving................ Enabled DQS Skew Control...................... Auto DQS Skew Value........................ 0 DRAM Drive Strength................... Level 06 DRAM Data Drive Strength.............. Level 1 Max Asynchronous Latency.............. 09.0 DRAM Response Time.....................Fastest Read Preamble Time.................... 03.0 IdleCycle Limit........................16 Dynamic Counter....................... Disable R/W Queue Bypass.......................16X Bypass Max.............................07X 32-Byte Granularity................... Disable (4 bursts) [/color] Prime95 + 3dMark2001SE + CPU-Z 1.33.1 + Everest 2.01: 3dMark2003: 3dMark2005: 3dMark2006: short description: 339x9@ 3050Mhz, 1.525v + 104.8% 3-3-2-0 @ 2.64v vdimm Share this post Link to post Share on other sites More sharing options...
TheFlowerKing Posted June 11, 2006 Posted June 11, 2006 DFI LANPARTY nF4 Ultra-D - 0510Fix-2 BIOS 170 CCBWE 0550UPMW Toledo under Big Typhoon 2x512MB OCZ VX4000 + 2x512Mb Twinmos SP3500 XFX 7900GT 256MB, 550/1644 80GB IDE hdd (8MB cache) 160GB IDE hdd (8MB cache) Enermax 535w ========== Genie BIOS Settings: FSB Bus Frequency - 270 LDT/FSB Frequency Ratio - 3x CPU/FSB Frequency Ratio - 10x PCI eXpress Frequency - 100Mhz CPU VID StartUp Value - AUTO CPU VID Control - 1.425v CPU VID Special Control - Above VID * 113% LDT Voltage Control - 1.20v Chip Set Voltage Control - 1.50v DRAM Voltage Control - 3.40v DRAM Configuration Settings: DRAM Frequency Set - 180=RAM/FSB:09/10 Command Per Clock (CPC) - Disable CAS Latency Control (Tcl) - 2.0 RAS# to CAS# delay (Trcd) - 02 Bus Clocks Min RAS# active time (Tras) - 05 Bus Clocks Row precharge time (Trp) - 02 Bus Clocks Row Cycle time (Trc) - 07 Bus Clocks Row refresh cyc time (Trfc) - 15 Bus Clocks Row to Row delay (Trrd) - 02 Bus Clocks Write recovery time (Twr) - 02 Bus Clocks Write to Read delay (Twtr) - 01 Bus Clocks Read to Write delay (Trwt) - 02 Bus Clocks Refresh Period (Tref) - 3120 Cycles Write CAS Latency (Twcl) - 01 DRAM Bank Interleave - Enabled DQS Skew Control - Auto DQS Skew Value - 0 DRAM Drive Strength - Level 7 DRAM Data Drive Strength - Level 2 Max Async Latency - 9.0 Nano Seconds DRAM Response Time - Fast Read Preamble Time - 6.5 Nano Seconds IdleCycle Limit - 16 Cycles Dynamic Counter - Enable R/W Queue Bypass - 16 x Bypass Max - 04 x 32 Byte Granularity - Disable(4 Bursts) ========== Prime95 + 3dMark2001SE (33439) + CPU-Z 1.33: http://img143.imageshack.us/img143/3773/pr...1is334392bd.jpg 3dMark2003 (20394) + Everest Read (5910): http://img143.imageshack.us/img143/4333/3d...readis59103.jpg 3dMark2005 (9645) + Everest Read (2295): http://img143.imageshack.us/img143/9036/3d...riteis22952.jpg 3dMark2006 (5329) + Everest Latency (48.9ns): http://img301.imageshack.us/img301/3125/3d...atencyis48p.jpg ========== short description: 270x10 @ 2700Mhz, 1.425v + 113% 4x512Mb @ 2-2-5-2 @ 3.4v v @ 245MHz Share this post Link to post Share on other sites More sharing options...
soundx98 Posted June 12, 2006 Posted June 12, 2006 DFI NF4 Venus @ 3010MHz - 2G Mushkin XP4000 Black UCC DFI LANPARTY nF4 Venus #D607000349 Bios 03/29/2006 AMD Opteron 146 CAB2E 0540 FPMW 2x1024 Mushkin XP4000 Black DDR500 UCC (991483) XFX 7800GTX 256MB, 450/1050 Vista x64 drivers 3 x WD2500KS SATA II (16M Cache) RAID 0 (750G Array) Read Caching DISABLED NEC-4551 DVD R/RW Silver OCZ PowerStream OCZ520ADJ ATX 520W Power Supply Thermalright XP-90 + ThermalTake A2017 + AS Ceramique Matric Orbital MX-421 LCD Display Silverstone Temjin J-o6 Silver Case * * My Rig Pics #1 #2 * * ========== Genie BIOS Settings: FSB Bus Frequency - 301 LDT/FSB Frequency Ratio - 3.0 CPU/FSB Frequency Ratio - x10 PCI eXpress Frequency - 100Mhz CPU VID StartUp Value - AUTO CPU VID Control - 1.300v CPU VID Special Control - Above VID * 114.4% LDT Voltage Control - 1.40v Chip Set Voltage Control - 1.59v DRAM Voltage Control - 2.56v DRAM Configuration Settings: DRAM Frequency Set - 166=RAM/FSB:05/06 Command Per Clock (CPC) - Enable CAS Latency Control (Tcl) - 3.0 RAS# to CAS# delay (Trcd) - 04 Bus Clocks Min RAS# active time (Tras) - 08 Bus Clocks Row precharge time (Trp) - 04 Bus Clocks Row Cycle time (Trc) - 07 Bus Clocks Row refresh cyc time (Trfc) - 15 Bus Clocks Row to Row delay (Trrd) - 02 Bus Clocks Write recovery time (Twr) - 02 Bus Clocks Write to Read delay (Twtr) - 02 Bus Clocks Read to Write delay (Trwt) - 04 Bus Clocks Refresh Period (Tref) - 3684 Cycles Write CAS Latency (Twcl) - Auto DRAM Bank Interleave - Enabled DQS Skew Control - Auto DQS Skew Value - 0 DRAM Drive Strength - Level 02 DRAM Data Drive Strength - Level 4 Max Async Latency - 8.0 Nano Seconds DRAM Response Time - Fast Read Preamble Time - 6.5 Nano Seconds IdleCycle Limit - 256 Cycles Dynamic Counter - Disable R/W Queue Bypass - 16 x Bypass Max - 04 x 32 Byte Granularity - Disable (4 Bursts) ========== Prime95 + 3dMark2001SE + CPU-Z 1.34-1 + Everest 2.80 Ultimate: 3dMark2003: 3dMark2005: 3DMark 2006 ========== short description: 300x10 @ 3010Mhz, 1.300v + 114.4% 3.0-4-8-4 @ 2.56v vdimm Vista x64 (Beta 2, Build 5384) Share this post Link to post Share on other sites More sharing options...
raju Posted June 13, 2006 Posted June 13, 2006 DFI LANPARTY CFX3200-DR (5/23/2006 BIOS) AMD Athlon64 X2 4800+ (IHS removed) 2 X 1GB Corsair 3500LL PRO Radeon X1900 CrossFire Edition 512MB, 690/1600 CAT 6.5 drivers Radeon X1900XTX 512MB, Default clocks CAT 6.5 drivers 2x250GB WD2500ks SATA II hdd raid 0 TAGAN TG900-U95 900W Power Supply Thermochill PA120.3 Radiator Swiftech Storm Universal waterblock Laing D5 water pump Danger Den 7/16 (ID) red tubing * * * * ========== [b]Genie BIOS Settings:[/b] [color=red] FSB Bus Frequency............................. - 270 LDT/FSB Frequency Ratio....................... - x 4.0 CPU/FSB Frequency Ratio....................... - x 10.0 RD580 HT PLL Speed............................ - High Speed HT Bus MMOS Drive Strength.................... - 31 HT Bus PMOS Drive Strength.................... - 31 HT Bus Receiever Impedance.................... - 10 CPU HT Bus Drive Strength..................... - Strong CPU VID Control............................... - 1.50v CPU VID Special Control....................... - Auto DRAM Voltage Control.......................... - 2.70v SB PCIE Voltage............................... - 1.80v NB Analog Voltage............................. - 1.34v LDT Bus Voltage............................... - 1.21v NB Core Voltage............................... - 1.34v [/color] [b]DRAM Configuration Settings:[/b] [color=red] DRAM Frequency Set............................ - 200=RAM/FSB:01/01 Command Per Clock (CPC)....................... - Enable CAS Latency Control (Tcl)..................... - 3.0 Bus Clocks RAS# to CAS# delay (Trcd)..................... - 03 Bus Clocks Min RAS# active time (Tras)................... - 08 Bus Clocks Row precharge time (Trp)...................... - 02 Bus Clocks Row Cycle time (Trc).......................... - 10 Bus Clocks Row refresh cyc time (Trfc)................... - 16 Bus Clocks Row to Row delay (Trrd)....................... - 03 Bus Clocks Write recovery time (Twr)..................... - 03 Bus Clocks Write to Read delay (Twtr).................... - 02 Bus Clocks Read to Write delay (Trwt).................... - 03 Bus Clocks Refresh Period (Tref)......................... - 1560 Cycles DRAM Bank Interleave.......................... - Enabled Errata 94 Enhancement......................... - Disable Errata 123 Enhancement........................ - Auto Odd Divisor Correct........................... - Disable DQS Skew Control.............................. - Auto DQS Skew Value................................ - 0 DRAM Drive Strength........................... - Level 6 DRAM Data Drive Strength...................... - Level 1 (Reduce 50%) DIMM 1/3 Clock Timing Skew.................... - Auto DIMM 2/4 Clock Timing Skew.................... - Delay 450ps Max Async Latency............................. - 8.0 ns Read Preamble Time............................ - 6.0 ns IdleCycle Limit............................... - 256 Cycles Dynamic Counter............................... - Disable R/W Queue Bypass.............................. - 16 x Bypass Max.................................... - 7 x Burst Length.................................. - 4 Bursts [/color] ========== Prime95 + 3dMark2001SE + CPU-Z 1.29 + Everest 2.01: http://img228.imageshack.us/my.php?image=3...1andrest9pt.jpg 3dMark2003: http://img207.imageshack.us/my.php?image=3dmark20034ym.jpg 3dMark2005: http://img395.imageshack.us/my.php?image=3dmark20052el.jpg 3dMark2006: http://img153.imageshack.us/my.php?image=3dmark20062ji.jpg ========== short description: 270x10 @ 2700Mhz, 1.50v 3.0-3-8-2 @ 2.70v vdimm Share this post Link to post Share on other sites More sharing options...
EdLSmith Posted June 14, 2006 Posted June 14, 2006 DFI LANPARTY nF4 SLI-DR Expert - Tony's 406 BIOS AMD Athlon64 FX-60 Toledo OCZ Platinum Edition 2GB (2 x 1GB) 184-Pin DDR SDRAM DDR 500 (PC 4000) Unbuffered Dual Channel Kit System Memory Model OCZ5002048EBPE-K - Retail 2X BFG 7900GTXOC 512MB SLI, 670/1640 91.28 drivers Western Digital 74GB hdd SATA "RAPTOR"(8MB cache) DVD Writer Plextor 716SA SATA ========== Genie BIOS Settings: FSB Bus Frequency - 202 LDT/FSB Frequency Ratio - AUTO CPU/FSB Frequency Ratio - 15 PCI eXpress Frequency - 100Mhz CPU VID StartUp Value - 1.400v CPU VID Control - 1.400v CPU VID Special Control - Above VID * 107.2% LDT Voltage Control - 1.40v Chip Set Voltage Control - 1.58v DRAM Voltage Control - 2.80v DRAM Configuration Settings: DRAM Frequency Set - 200=RAM/FSB:01/01 Command Per Clock (CPC) - Enable CAS Latency Control (Tcl) - 2.5 RAS# to CAS# delay (Trcd) - 03 Bus Clocks Min RAS# active time (Tras) - 06 Bus Clocks Row precharge time (Trp) - 02 Bus Clocks Row Cycle time (Trc) - 10 Bus Clocks Row refresh cyc time (Trfc) - 15 Bus Clocks Row to Row delay (Trrd) - 03 Bus Clocks Write recovery time (Twr) - 02 Bus Clocks Write to Read delay (Twtr) - 02 Bus Clocks Read to Write delay (Trwt) - 03 Bus Clocks Refresh Period (Tref) - 3072 Cycles ODD DIVISOR - Disable DRAM Bank Interleave - Enabled DQS Skew Control - Increase DQS Skew Value - 200 DRAM Drive Strength - Level 5 DRAM Data Drive Strength - Level 1 Max Async Latency - auto DRAM Response Time - Normal Read Preamble Time - auto IdleCycle Limit - 4 Cycles Dynamic Counter - Disable R/W Queue Bypass - 4 x Bypass Max - 02 x 32 Byte Granularity - Disable(4 Bursts) ========== Prime95 + 3dMark2001SE + CPU-Z 1.34 + Everest 2.01: http://s2.supload.com/image.php?get=FX-60_...DB_Entry_01.JPG 3dMark2003: http://s2.supload.com/image.php?get=FX-60_...DB_Entry_03.bmp 3dMark2005: http://s2.supload.com/image.php?get=FX-60_...DB_Entry_05.JPG 3dMark2006: http://s2.supload.com/image.php?get=FX-60_...DB_Entry_06.JPG ========== short description: 202x15 @ 3030Mhz, 1.400v + 107.2% 2.5-3-6-2 @ 2.8v vdimm Share this post Link to post Share on other sites More sharing options...
Praz Posted June 15, 2006 Posted June 15, 2006 LANPARTY UT NF4 SLI-DR Venus - 03/07/06 BIOS AMD Opteron 165 CCBBE0610DPMW Mushkin eXtreme Performance 2GB (2 x 1GB) Redline OCZ OCZ5002048EBPE-K 2GB Kit DDR500 PC4000 Platinum Edition HIS Radeon X1900 XT IceQ3, 705/837, Omega 3.8.252 drivers Hitachi Deskstar T7K250 160GB Serial ATA II 7200RPM Hard Drive w/8MB Buffer x 2 RAID 0 Maxtor Maxline III 7L300S0 300GB Serial ATA 1.5Gb 7200RPM Hard Drive w/16MB Buffer Liteon SOHW-1693S 16X Dual Layer DVD±RW Drive (Black) OCZ GameXStream OCZ700GXSSLI ATX12V 700W Power Supply Swiftech STORM Extreme Performance Universal Water-block - Rev 2 Swiftech MCP655 Pump Black Ice Pro III Triple 120mm Radiator With D12SL-12 YATE LOON 120mm Case Fans Chipset Cooled By Evercool VC-RE VGACooler * * ========== [b]Genie BIOS Settings:[/b] [color=red] FSB Bus Frequency............................. - 339 LDT/FSB Frequency Ratio....................... - Auto CPU/FSB Frequency Ratio....................... - 9.0 PCI eXpress Frequency......................... - 100Mhz CPU VID StartUp Value......................... - 1.350v CPU VID Control............................... - 1.525 CPU VID Special Control....................... - 104.8 LDT Voltage Control........................... - 1.20v Chip Set Voltage Control...................... - 1.52v DRAM Voltage Control.......................... - 2.80v[/color] [b]DRAM Configuration Settings:[/b] [color=red] DRAM Frequency Set............................ - 150=RAM/FSB:03/04 Command Per Clock (CPC)....................... - Disable CAS Latency Control (Tcl)..................... - 3 CAS# to CAS# delay (Trcd)..................... - 3 Min RAS# active time (Tras)................... - 00 Row precharge time (Trp)...................... - 2 Row Cycle time (Trc).......................... - 07 Bus Clocks Row refresh cyc time (Trfc)................... - 13 Bus Clocks Row to Row delay (Trrd)....................... - 00 Bus Clocks Write recovery time (Twr)..................... - 02 Bus Clocks Write to Read delay (Twtr).................... - 01 Bus Clocks Read to Write delay (Trwt).................... - 03 Bus Clocks Refresh Period (Tref)......................... - 3120 Cycles DRAM Bank Interleave.......................... - Enabled DQS Skew Control.............................. - Auto DQS Skew Value................................ - 0 DRAM Drive Strength........................... - 06 DRAM Data Drive Strength...................... - Level 1 Max Async Latency............................. - 09.0 DRAM Response Time............................ - Fastest Read Preamble Time............................ - 05.5 IdleCycle Limit............................... - 16 Cycles Dynamic Counter............................... - Disable R/W Queue Bypass.............................. - 16 x Bypass Max.................................... - 07 x 32 Byte Granularity........................... - Disable(4 Bursts) [/color] ========== Prime95 + 3dMark2001SE + CPU-Z + Everest 2.20: 3dMark2003: 3dMark2005: 3dMark 2006: ========== short description: 339x9 @ 3051Mhz, 1.598V 3-3-0-2 @ 2.80v vdimm Share this post Link to post Share on other sites More sharing options...
zarathrustra Posted June 16, 2006 Posted June 16, 2006 Here's my new entry with the CPU and GPU under water cooling, and a few more volts through the 7900:D DFI LANPARTY nF4 SLI-DR Expert (7/04-2BTA BIOS) Naked Core A64 3700+ Toledo (with a disabled core) 2x512MB Twinmos (Powerchip) XFX GeForce 7900GT, 715/1890 1.55vCore 2.10vMem 91.31 drivers 160GB Seagate SATA II hdd Generic DVD/CD-R/RW Enermax Liberty 500W PSU DangerDen TDX/Maze4 GPU/D5 pump/BI GTS360 ========== [b]Genie BIOS Settings:[/b] [color=red] FSB Bus Frequency............................. - 257 LDT/FSB Frequency Ratio....................... - X4 CPU/FSB Frequency Ratio....................... - X11 PCI eXpress Frequency......................... - 110Mhz CPU VID StartUp Value......................... - 1.475v CPU VID Control............................... - 1.475 CPU VID Special Control....................... - X 112.0% LDT Voltage Control........................... - 1.50v Chip Set Voltage Control...................... - 1.62v DRAM Voltage Control.......................... - 2.92v[/color] [b]DRAM Configuration Settings:[/b] [color=red] DRAM Frequency Set............................ - 180=RAM/FSB:09/10 Command Per Clock (CPC)....................... - Enable CAS Latency Control (Tcl)..................... - 2.5 RAS# to CAS# delay (Trcd)..................... - 3 Bus Clocks Min RAS# active time (Tras)................... - 7 Bus Clocks Row precharge time (Trp)...................... - 3 Bus Clocks Row Cycle time (Trc).......................... - 8 Bus Clocks Row refresh cyc time (Trfc)................... - 12 Bus Clocks Row to Row delay (Trrd)....................... - 02 Bus Clocks Write recovery time (Twr)..................... - 03 Bus Clocks Write to Read delay (Twtr).................... - 02 Bus Clocks Read to Write delay (Trwt).................... - 02 Bus Clocks Refresh Period (Tref)......................... - 2064 Cycles DRAM Bank Interleave.......................... - Enabled DQS Skew Control.............................. - Auto DQS Skew Value................................ - 0 DRAM Drive Strength........................... - Leval 9 DRAM Data Drive Strength...................... - Leval 4 (Reduce 00%) Max Async Latency............................. - 07.0 Nano Seconds DRAM Response Time............................ - Fast Read Preamble Time............................ - 06.0 Nano Seconds IdleCycle Limit............................... - 032 Cycles Dynamic Counter............................... - Enable R/W Queue Bypass.............................. - 16 x Bypass Max.................................... - 07 x 32 Byte Granularity........................... - Disable(4 Bursts) [/color] ========== Prime95 + 3dMark2001SE + CPU-Z: Everest Memory Benchies: 3dMark2003: 3dMark2005: 3dMark 2006: ========== short description: 257x11 @ 2827Mhz, 1.65 vCore 2.5-3-7-3 @ 2.62v vdimm Share this post Link to post Share on other sites More sharing options...
CPDMF Posted June 17, 2006 Posted June 17, 2006 DFI LANPARTY nF4 SLI-DR EXPERT (E7/04-2BTA BIOS) AMD OPTERON 148 CABYE 0540FPBW TDX CPU BLOCK, SWIFTECH MCP650 @ 14 VOLTS, 280 X 160 HEATER CORE, 4 X 120 PANAFLO, MEANWELL S12-500 2x1024M G.SKILL HZ PC4000 1 X BFG 7800GT + 1 X EVGA 7800GT/ MAZE4 COOLED, 425/1050 91.31 drivers 4 X 36GB Western Digital RaptorS 10,000RPM SATA RAID0 SONY DUAL LAYER BURNER OCZ 600 POWERSTREAM SLI * * ========== [b]Genie BIOS Settings:[/b] [color=red] FSB Bus Frequency............................. - 288 LDT/FSB Frequency Ratio....................... - X 3 CPU/FSB Frequency Ratio....................... - X 11 PCI eXpress Frequency......................... - 101Mhz CPU VID StartUp Value......................... - 1.500v CPU VID Control............................... - 1.375 CPU VID Special Control....................... - 116.8% LDT Voltage Control........................... - 1.30v Chip Set Voltage Control...................... - 1.52v DRAM Voltage Control.......................... - 2.61v[/color] [b]DRAM Configuration Settings:[/b] [color=red] DRAM Frequency Set............................ - 180=RAM/FSB:09/10 Command Per Clock (CPC)....................... - Enable CAS Latency Control (Tcl)..................... - 3 RAS# to CAS# delay (Trcd)..................... - 4 Min RAS# active time (Tras)................... - 8 Row precharge time (Trp)...................... - 4 Row Cycle time (Trc).......................... - 8 Bus Clocks Row refresh cyc time (Trfc)................... - 16 Bus Clocks Row to Row delay (Trrd)....................... - 02 Bus Clocks Write recovery time (Twr)..................... - 02 Bus Clocks Write to Read delay (Twtr).................... - 02 Bus Clocks Read to Write delay (Trwt).................... - 03 Bus Clocks Refresh Period (Tref)......................... - 3684 Cycles DRAM Bank Interleave.......................... - Enabled DQS Skew Control.............................. - Auto DQS Skew Value................................ - 0 DRAM Drive Strength........................... - LEVEL 8 DRAM Data Drive Strength...................... - LEVEL 2 Max Async Latency............................. - 8.0NS DRAM Response Time............................ - Normal Read Preamble Time............................ - 5.5NS IdleCycle Limit............................... - 128 Cycles Dynamic Counter............................... - Disable R/W Queue Bypass.............................. - 08 x Bypass Max.................................... - 04 x 32 Byte Granularity........................... - Disable(4 Bursts) [/color] ========== Prime95 + 3dMark2001SE + CPU-Z + Everest 2.20: http://i31.photobucket.com/albums/c387/CPDMF/OCDB01.jpg 3dMark2003: 3dMark2005: 3dMark 2006: ========== short description: 288x11 @ 3169Mhz, 1.61V 3 4 8 4 @ 264/ 2.66v vdimm Share this post Link to post Share on other sites More sharing options...
Recommended Posts
Please sign in to comment
You will be able to leave a comment after signing in
Sign In Now