Guest Trippin Posted August 17, 2005 Posted August 17, 2005 redownloaed tried 815 again ..heres what it said .."The version of the bios was innacurate remove floppy and download right one...fer sure a real beta ..still in the works ? Share this post Link to post Share on other sites More sharing options...
terror_adagio Posted August 17, 2005 Posted August 17, 2005 redownloaed tried 815 again ..heres what it said .."The version of the bios was innacurate remove floppy and download right one Download the zip one and put the BIOS/AWDFLASH on a floppy and do it that way. Its better doing it that way anyways. Share this post Link to post Share on other sites More sharing options...
Guest Trippin Posted August 17, 2005 Posted August 17, 2005 not alot of faith ..in these guys I think Ill wait till they get there act together Share this post Link to post Share on other sites More sharing options...
Katch Posted August 17, 2005 Posted August 17, 2005 The batch file that comes to flash in the packages is written wrong. It cause the same blank screen with cursor hang when I tried it. Just put awdflash.exe and the 711.rom on a bootdisk the flash using a:awdflash 711.rom /CC /F Share this post Link to post Share on other sites More sharing options...
terror_adagio Posted August 17, 2005 Posted August 17, 2005 not alot of faith ..in these guys I think Ill wait till they get there act together Why not do it the other way? The way you SHOULD do it. It works fine. Share this post Link to post Share on other sites More sharing options...
terror_adagio Posted August 17, 2005 Posted August 17, 2005 The batch file that comes to flash in the packages is written wrong. It cause the same blank screen with cursor hang when I tried it. Just put awdflash.exe and the 711.rom on a bootdisk the flash using a:awdflash 711.rom /CC /F I've always just made a Boot disk within XP, copied over the Autoexec, BIOS, and AWDFLASH and its worked perfectly fine. Never had to type anything, all automatic. Share this post Link to post Share on other sites More sharing options...
pantonious Posted August 17, 2005 Posted August 17, 2005 oooooh, new BIOS...will give that a try tonight when i get home from work... however, im having a new problem... my computer locks up occasionally (mostly on a cold-boot) when it gets to the "varifying DMI data pool..."...it will just sit there, if i reset, no problem have tried with my TCC5 and BH-5, so, i doubt it is the RAM... i am running the 705 BIOS any ideas??? Share this post Link to post Share on other sites More sharing options...
Guest Tim Posted August 17, 2005 Posted August 17, 2005 You must remove the cheap fan first by unscrewing it off the heatsink. Then turn over the motherboard and pick out the two holding plastics and if you have one, get a hairdryer and put it on the lowest setting and warm the back of where the chipset is. Not too close, it doesn't need to be very warm. I then got a thin small screwdriver and slighty pinched the heatsink and it removed quite easily. Thank you very very much..... :nod: Share this post Link to post Share on other sites More sharing options...
Katch Posted August 17, 2005 Posted August 17, 2005 Ok report on the 8/15 Flashed fine, several different options, feels like a different build BIOS. All up to stock and stress testing now. Share this post Link to post Share on other sites More sharing options...
terror_adagio Posted August 17, 2005 Posted August 17, 2005 Ok report on the 8/15 Flashed fine, several different options, feels like a different build BIOS. All up to stock and stress testing now. Nice. Keep us posted! Share this post Link to post Share on other sites More sharing options...
xinty Posted August 17, 2005 Posted August 17, 2005 hi there, i just buy a pair of TCCD from patriot. really 10x for oldguy. for yours OC in database. i follow all the setting you did. it is running good now. i have some question here. 1.i didnt use weak drive and 50%reduction and i didnt try it. i try it with my utt ch-5, can only run at 15%reduction with weak drive. 30% and 50%, my pc wont post at all. is there any benefit of using it??? frm what i know from here, it is to make ram more stable. i running them at 300 2.5.4.7.3 2Tmemtest ok. 2.i saw some user of other MB can did 1T 2.5.3.3.7 300FSB with the same ram. but i think our MB can only run around 300 2.5.4.7.3 2t. what is the problem??? ram?cpu?MB? 3.my cpu is running prime 95, and temperature report from smartguardian is 65C. is this ok??? what e temperature you all running at 2.7mHz? i using something similar to zalman HSF, it is from PCcooler. 4.do i need a fan which blowing at the ram??? any help from my previous post??? 10x for help Share this post Link to post Share on other sites More sharing options...
OldGuy Posted August 18, 2005 Posted August 18, 2005 The batch file that comes to flash in the packages is written wrong. It cause the same blank screen with cursor hang when I tried it. Just put awdflash.exe and the 711.rom on a bootdisk the flash using a:awdflash 711.rom /CC /F The damned batch file refers to NF3ID815.zip! Not the .bin file I'm amazed these guys don't double check this stuff before posting it up for download...Lordy! Share this post Link to post Share on other sites More sharing options...
Recommended Posts
Please sign in to comment
You will be able to leave a comment after signing in
Sign In Now