Jump to content

terror_adagio

Members
  • Content Count

    177
  • Joined

  • Last visited

About terror_adagio

  • Rank
    Member
  1. And considering the AGP undervolts by .5 volts, going up to 1.6 would probably be pretty safe.
  2. My gosh. I went back to 711. Back to normal. Definitely avoid this BIOS everyone. It has potential in its setup and new settings, but its less stable than my previous ex-girlfriend.
  3. Ah, So it would appear I am not the only one who got big beeps right after flashing and had to clear CMOS. As it happened to both Trippin and Rebel. Strange that you were able to hit your same overclock Rebel. I couldn't for the life of me, would lock up and boot me back to startup as soon as XP was about to start. Tried it with CPU Throttling 50 percent (Default) and Disabled. No go.
  4. Oldguy, What was your exact flash process for 815? Did you do it with ZIP contents and floppy? awdflash nfsid815.bin /f ? Right after I flashed, I got a nice beep and nothing would post, had to clear CMOS and it posted. Did it do this to anyone else after flash? First time for me, never did it with a 602, 705, or 711 flash.
  5. I'd recommend a OS install only after many flashes, not after just one.
  6. I don't like 815 at all. Got a nice big no post after flash, had to reset CMOS and couldn't hit my previous overclock at all with same settings in 705/711. BIOS looks interesting, but isn't as stable as 705/711.
  7. I've always just made a Boot disk within XP, copied over the Autoexec, BIOS, and AWDFLASH and its worked perfectly fine. Never had to type anything, all automatic.
  8. Why not do it the other way? The way you SHOULD do it. It works fine.
  9. Download the zip one and put the BIOS/AWDFLASH on a floppy and do it that way. Its better doing it that way anyways.
  10. You must remove the cheap fan first by unscrewing it off the heatsink. Then turn over the motherboard and pick out the two holding plastics and if you have one, get a hairdryer and put it on the lowest setting and warm the back of where the chipset is. Not too close, it doesn't need to be very warm. I then got a thin small screwdriver and slighty pinched the heatsink and it removed quite easily.
  11. Is this with the new 815 BIOS? You are running it thus far fine?
×
×
  • Create New...