The ULTIMATE MBM 5 Settings/Help Thread

[PRJ]

Hi again

 

I think it's because of SLi use other sensors than single cards use.

 

Well, thanks enyway I'll just have to wait for a fix, cause there must be other SLi users that would like this funktion to.

 

PRJ

[w00table]

samurize temp monitors

 

heres teh problem.. when MBM5 is open by itself, it works great. on teh other hand, when both MBM5 and samurize are open, mbm screws up and go crazy. by that i mean that the temp monitors will freak out and report the correct temp for a few secs, and then revert to 0 deg C.

 

anyone had this problem? ive run through settings all over the place and havent figured out a solution.

 

Thanks in advance

 

--w00table

[soundx98]

You need to fix your location

[sumang007]

Hey,

 

I just installed the nVidia GPU plugin for MBM5, thanks _xhp_ however one small problem. in the High/Low settings screen, all the columns (Current, High, Low and Average) all display the same value, which is the current value! Is there any way to correctly log the individual values?

 

Using MBM 5370 and v7 of the plug-in

 

Thanks,

 

Suman

[red930]

I'd just like to say I've been using MBM5(modded) since soundx 1st posted this...on NF2 of course and I love it.

 

I'd also like to say thanks to everybody else that's been workin on this.

 

I do have alittle prob,I get GPU core just fine,but can't get ambient.

 

It's a small thing really,I've always wanted to see the nvidia core displayed,but I guess I want the icing as well.(as usual)

 

All right here's the specs:

Ultra D

XFX 7800GT-single card

84.21 Forceware

7.0a plugin

NV temp display=yes

 

I"ve run the procedure twice from start to finish,deleted everything out and reinstalled

 

In the MBM5 settings in the MBM5 Sensor it displays GPU Core and GPU Ambient instead of 25 and 26 and yes Custom is selected for both.

Display this temp in the dashboard screen is checked

 

System Info- temperature readout[26]=0

 

PlugIn-Notepad=looks just like it should

[snugglealufacus]

i dont think that the 7800GT's have amb temp. mine doesnt, and ive heard a few others with the same problem.

[red930]

i dont think that the 7800GT's have amb temp. mine doesnt, and ive heard a few others with the same problem.

 

Allright thanks,love it anyways.

 

another little Q

In bios I'm getting cpu temps like 34-36,but in MBM5 it's like 31.

 

I was about to reseat the Freezer64 Pro,but then I noticed the disparity.

 

Also the fan speeds are quite diff,like 1000 rpm's higher in MBM5 than bios for cpu and chipset

 

Hey snugglealufacus,

Nice sig dude

[_xhp_]

Posted NVMBMPlugin v7.22 :

http://www.dfi-street.com/forum/showthread...9236#post169236

[soundx98]

The New Plug-in is working beautifully for me _xhp_

The new 7.22 MBMNV Driver http://premium1.uploadit.org/soundx98//MBM...r_v7_22_ALL.rar

Now tracking CPU Core temp and and Core clock perfectly.

You are da MAN!

 

 

 

Make sure MBM5 is closed.

Download the new plug-in above and open the .rar file.

Extract the "dll" to MBM5 Plug-in folder

Extract the "nv.ini" file to Data folder

 

Make sure you change the settings for "Core Clock" and "GPU Core"

 

Start MBM5

Make sure you start Plug-in.

You'll be good to go!

 

Hope this helps as well

 

 

 

NOTE: Updated posts #1 and # 2 in thread.

Added new _xhp_ MBMNV 7.22 link in Post #1 plus additional links.

Added pics/links on Expert/Venus, NF3 Ultra-D, and NF3 250GB to PWMIC section.

[PRJ]

Posted NVMBMPlugin v7.22 :

http://www.dfi-street.com/forum/showthread...9236#post169236

 

That is so great, thanks man!

 

Thanks for the updated version, nice job..... guru of MBM5 :nod:

 

:nod: :nod: :nod: :nod: :nod: :nod:

 

Thanks!

 

PRJ

[sumang007]

Averages working fine now, thanks dude

[red930]

From _xhp_,

Note: you must also copy the "nvPlugin.ini" file to you "Plugin" directory!

 

From soundx98,

Extract the "nv.ini" file to Data folder

 

Am I nuts here but are these 2 diff instructions