urzrkymn Posted May 24, 2005 Posted May 24, 2005 My Corsair XMS 4400 c25 PT will boot with 510-2 and 510-3 but not 510-1... I thought my ram was TCCD and 510-1 was for TCCD? anyone? Share this post Link to post Share on other sites More sharing options...
THunDA Posted May 24, 2005 Posted May 24, 2005 My Corsair XMS 4400 c25 PT will boot with 510-2 and 510-3 but not 510-1... I thought my ram was TCCD and 510-1 was for TCCD? anyone? Doesnt matter what chips are on your sticks.. Nothing is written in stone.. If -2 and -3 work then stick with those.. Share this post Link to post Share on other sites More sharing options...
urzrkymn Posted May 24, 2005 Posted May 24, 2005 Gah, this is doin my sweed in, i'm gonna go out and buy a pentium 1 machine in a minute. Share this post Link to post Share on other sites More sharing options...
drewski Posted May 24, 2005 Posted May 24, 2005 Gah, this is doin my sweed in, i'm gonna go out and buy a pentium 1 machine in a minute. i'm not quite sure what you're saying , but if you're not happy with the new bios, go back to the last version you were using! Share this post Link to post Share on other sites More sharing options...
urzrkymn Posted May 24, 2005 Posted May 24, 2005 Its just that the different bios numbers are a pain in the butt!! techpowerup.com's bios page states -1 for both kinds of rams -3 for TCCD etc. -2 for BH5/CH5 etc" http://www.techpowerup.com/articles/other/114 pershoot says : -1 tccd/tccc 3.26 dram table -2 bh/ch 3.16 dram table -3 both/misc./generic 3.10 dram table post# 295 of this thread Then THunDA says to just use what works best! I've heard other different combinations too! GAH! :drool: Share this post Link to post Share on other sites More sharing options...
pershoot Posted May 24, 2005 Posted May 24, 2005 Its just that the different bios numbers are a pain in the butt!! techpowerup.com's bios page states -1 for both kinds of rams -3 for TCCD etc. -2 for BH5/CH5 etc" http://www.techpowerup.com/articles/other/114 pershoot says : -1 tccd/tccc 3.26 dram table -2 bh/ch 3.16 dram table -3 both/misc./generic 3.10 dram table post# 295 of this thread Then THunDA says to just use what works best! I've heard other different combinations too! GAH! :drool: what i stated is correct for descriptory purposes. however, you should try all 3 to see which works best for you. nothing is set in stone, as thunda stated. Share this post Link to post Share on other sites More sharing options...
THunDA Posted May 24, 2005 Posted May 24, 2005 Its just that the different bios numbers are a pain in the butt!! techpowerup.com's bios page states -1 for both kinds of rams -3 for TCCD etc. -2 for BH5/CH5 etc" http://www.techpowerup.com/articles/other/114 pershoot says : -1 tccd/tccc 3.26 dram table -2 bh/ch 3.16 dram table -3 both/misc./generic 3.10 dram table post# 295 of this thread Then THunDA says to just use what works best! I've heard other different combinations too! GAH! :drool: Its all comes down to THIS ..:nod: Share this post Link to post Share on other sites More sharing options...
pershoot Posted May 24, 2005 Posted May 24, 2005 Its all comes down to THIS ..:nod: overclocker beware;) Share this post Link to post Share on other sites More sharing options...
N4N01D Posted May 25, 2005 Posted May 25, 2005 hmm i tried 5/10-3 and when i got in to check the bios settings (loaded my cmos reloaded profile) and saved it and rebooted, i tried to get back into the bios and it froze just as i got in, anyone else having this prob? Share this post Link to post Share on other sites More sharing options...
Markus_d Posted May 25, 2005 Posted May 25, 2005 hmm thats wierd... I have a wierd problem with my cmos reloaded configs also... It seems like I cant type in the names i want for it, it just leaves the columns empty... anyone have sama problem ? Share this post Link to post Share on other sites More sharing options...
nathwdavis Posted May 25, 2005 Posted May 25, 2005 I'm having some minor memory issues using the 3/10 Bios and I heard that I should try out a 5/10 BIOS. So I figured I'd go ahead flash to the 510, but I'm not sure which one to use (1, 2, or 3)? Any suggestions for this RAM? Anyone actually using this RAM or similar? : GeIL 2 X 512 Kit - Blue Heatspreaders and rated for 2.5, 4, 4, 8 1T Product link: http://www.geilusa.com/proddetail.asp?linenumber=36 I have no idea what chips (TCCD, BH-5, ??) they are using. Any help would be greatly appreciated. Thanks. Share this post Link to post Share on other sites More sharing options...
Radical_53 Posted May 25, 2005 Posted May 25, 2005 510-2 has worked for quite many people I know. I even like it better now than my previous favourite 310P. Share this post Link to post Share on other sites More sharing options...
Recommended Posts
Please sign in to comment
You will be able to leave a comment after signing in
Sign In Now