AthlonAlien Posted July 12, 2006 Posted July 12, 2006 OCDB entry with a mix of Geil One and XBLK is at 264mhz with Ultra D and Opty 150 which was pretty easy. I was hoping for a little more tweakability with the Expert and 2 matched sets of Geil. Getting 4X512 above 260-270 is no easy task on any board unless every lil tid bit is stellar (mobo, cpu/mem controller and memory) not to mention my 146 is running at 3ghz so I'm sure the extra strain aint helping any :eek: (and I won't be giving up my 3g's for a better memory OC ) EDIT: Not done with tweaking on the Expert so the siggy hasn't been updated yet... :D Share this post Link to post Share on other sites More sharing options...
by -=Merlin=- Posted July 14, 2006 Posted July 14, 2006 updat: bios 10.07.06 I find very good worth! Merlin Share this post Link to post Share on other sites More sharing options...
slap Posted July 15, 2006 Posted July 15, 2006 Thanks Merlin, will try this on my tccd. Still remember you from the Abit NF7 days... Share this post Link to post Share on other sites More sharing options...
mar-one Posted July 16, 2006 Posted July 16, 2006 I don’t recommend using this I was getting lock ups with it went back 406 and no probs but thats just my opinion. Share this post Link to post Share on other sites More sharing options...
CPDMF Posted July 16, 2006 Posted July 16, 2006 Unless you have a back-up plan, don't flash with any modded bios. I said I would give it a shot because I was covered if anything went wrong.. Didn't make any improvements for me with my TCCD. My TCCD hasn't went past 265 with any bios on the expert and it was the same with this one for me. The Bios memtest would not run as well. Share this post Link to post Share on other sites More sharing options...
by -=Merlin=- Posted July 19, 2006 Posted July 19, 2006 it comes soon again new bios Dfi Expert very well for (TCCD, TCC5, UCCC) CE5, CE6 not tested -new nvmm -ram tbl -Silicon Image 5.3.14 Merlin Share this post Link to post Share on other sites More sharing options...
Bolemichel Posted July 27, 2006 Posted July 27, 2006 Hi Merlin, I'm very interested in your efforts creating a new BIOS for Expert/Venus Users who are using TCCD chips. As you surely know the TCCD-BIOS for Ultra-D/SLI-D... are based on the 326 ram table (http://www.techpowerup.com/articles/other/114). Do you also implement this ram table in your new mod bios? It would be fine cause the '-1' BIOS with the 326 ram table worked well with my old Ultra-D and TCCD chips. Second, what do you mean with 'new NVMM'? Is the memory management meant here? Share this post Link to post Share on other sites More sharing options...
Urok Posted August 3, 2006 Posted August 3, 2006 Not meaning to thread crap here, but I've got a DFI Expert board myself, and it's always been capable of DDR600+ speeds with 2 x 512MB of TCC5, regardless of BIOS. What I need to know is if this will help me reach increased frequencies with 4 x 512MB while retaining relatively tight timings. I'm on DDR430 at the moment with as tight of timings as I can manage. Some settings simply won't go lower because it's already as low as it can go. In any case, yeah, I'm hoping I can decrease the divider from CPU/14 to CPU/13 or CPU/12, or more to the point, get a higher amount of memory bandwidth while remaining stable. Is this BIOS for me? Share this post Link to post Share on other sites More sharing options...
Boosted420a Posted August 3, 2006 Posted August 3, 2006 Like Urok. I don't have much trouble reaching ddr600 on my expert board. The trouble I have is keeping it stable, which I beleive is mostly my cpu, and not the ram. I've tried this new bios and was not too thrilled with it at all. I kept getting BSOD's. And had a heck of a time getting to just 260x10. After the 3rd BSOD, I went back to DFI's 406. Thanks Merlin for trying to help us out. It's very much appreciated. Share this post Link to post Share on other sites More sharing options...
Lane Posted August 7, 2006 Posted August 7, 2006 No no i think it's the bios.. i have use OCZ4800EE ( TCCD600) on 3 different board.. no problem got 320mhz stable at 2.5-4-4-8 1T with them, but impossible do same on the Expert ..with same RAM same CPU... first was DFINF4 SLI DR, DFI CFX3200-DR,, Look on OCZ support thread ( bleeding edge..) you will see many guy have try a long long time and never arrive stabilise them... Share this post Link to post Share on other sites More sharing options...
AthlonAlien Posted August 8, 2006 Posted August 8, 2006 it comes soon again new bios Dfi Expert very well for (TCCD, TCC5, UCCC) CE5, CE6 not tested -new nvmm -ram tbl -Silicon Image 5.3.14 Merlin Okay, I have compared this BIOS to the latest official BIOS (04/06/2006). Merlin has stated the 3 things he changed above... I will try to elaborate a little more about them. The 04/06/2006 BIOS contained NVMM 4.054.0811/09/05, this BIOS contains NVMM with the version labeled as "Merlin". I am assuming this is a personally modified set by him. Next, the RAM table from the 04/06/2006 BIOS has been changed... I am still trying to confirm the original and changed versions... Finally, 04/06/2006 contained the Sil3114 version of 5.2.16. This BIOS has had the Sil3114 version updated to 5.3.14. -LaTeR Share this post Link to post Share on other sites More sharing options...
by -=Merlin=- Posted September 8, 2006 Posted September 8, 2006 new bios 07.09.2006 Beta still in the test -ram table Tccd Merlin Share this post Link to post Share on other sites More sharing options...
Recommended Posts
Please sign in to comment
You will be able to leave a comment after signing in
Sign In Now