Lane Posted August 17, 2006 Posted August 17, 2006 I m like Poopshot.. There's a new beta driver have been released some weeks ago, and normally should solve the issue...with new bios, Share this post Link to post Share on other sites More sharing options...
2000army Posted August 17, 2006 Posted August 17, 2006 right. I did the same thing but had m5288 errors whenever i launched BF2. when you install everything do you go to the CD that came with the board and install the southbridge drivers? Share this post Link to post Share on other sites More sharing options...
Lane Posted August 17, 2006 Posted August 17, 2006 Uar.. Good question.. i can't remember, not sure at all.. I have make a manual update certainly with the ULI driver, directly by the system cfg.. I have install the ATI driver for Northbridge... and :confused: Need say, the poor error i have ( 1 time in 2 weeks), have absolutely not impact at all during games or use.. no really i have just look the eveent viewer and see an error have occured at 0H50.. or i was working or playing at this time, and i have see nothing anormal... Before, when i have get the errors, my PC was freezing some seconds, and if it happend on agames.. it will make crash the games... now it's fine. Share this post Link to post Share on other sites More sharing options...
Nemesis.ie Posted August 17, 2006 Posted August 17, 2006 I have install the ATI driver for Northbridge... and :confused: Which is included in the Catalyst, right? Share this post Link to post Share on other sites More sharing options...
2000army Posted August 17, 2006 Posted August 17, 2006 there are no drivers for ati northbridge. its not nvidia Share this post Link to post Share on other sites More sharing options...
Nemesis.ie Posted August 17, 2006 Posted August 17, 2006 there are no drivers for ati northbridge. its not nvidia There are AFAIK, they come with your Catalyst install .... I would imagine it has to have drivers ... or at least it would be compatible with the (Intel?) ones built into XP? Share this post Link to post Share on other sites More sharing options...
Lane Posted August 17, 2006 Posted August 17, 2006 It's not a driver like Nvidia.. it's a component of the Catalyst: here taken by the note, like i mod driver i ghave check too the files of the driver .. there's to reference to the "chipset" Cfire I don't think this have a real importance before you use Cfire.. But if you open ATI-tool, you will see a device and this device is the ATI chipset.. and this one is marked like using the Catalyst you have installed... ( in my case XG Warcat 6.7) Need say i have absolutely not idea what do this " part of driver" and what is the utilisation. Share this post Link to post Share on other sites More sharing options...
2000army Posted August 17, 2006 Posted August 17, 2006 I think you might have installed onboard video drivers. and ati tool is looking at it as a second device. However, I am not sure so please do not think I am trying to one-up anyone with these answers. just trying to figure it out myself. I think the components you found were for ati's sb450/ i do see southbridge support in the notes but none for the northbridge http://www.hardforum.com/showthread.php?t=1085215 Share this post Link to post Share on other sites More sharing options...
Lane Posted August 17, 2006 Posted August 17, 2006 No onboard video drivers.. you know there's no onboard GPU's in CFX3200, RX200 etc..... i think this is the the processor for use the Cfire... not sure at all.. I m likeyou, i have many interrogations about this processor , if you look the amount of memory, it's exactly the same you have available for PCI express , and PCI.. the processor is certainly the ATI Northbridge.. Really i m not sure at all... But we can image easy, they update the northbridge with this Catalyst for Cfire support. Share this post Link to post Share on other sites More sharing options...
bmorgan98 Posted August 18, 2006 Posted August 18, 2006 hey i disabled the raid setup but still used the raid rom and f6 method and machine is mucho better (single drive mode on sata port 0 but still with raid rom) not an error now with the new beta driver. Time will tell. (hate not having my raid 0 array though, want it back.) Share this post Link to post Share on other sites More sharing options...
Nemesis.ie Posted August 18, 2006 Posted August 18, 2006 If you can perhaps try setting up a RAID array using windows, it would be interesting to see if there are problems or not. If there are none, it might point to the RAID code being the issue .... I hope DFI/ULI are actually testing with 4-drive RAID0/5 arrays ..... Share this post Link to post Share on other sites More sharing options...
bmorgan98 Posted August 18, 2006 Posted August 18, 2006 If you can perhaps try setting up a RAID array using windows, it would be interesting to see if there are problems or not. If there are none, it might point to the RAID code being the issue .... I hope DFI/ULI are actually testing with 4-drive RAID0/5 arrays ..... hmm ok but first i will image the installation. edit. oh i thought you meant raid in bios umm ok i see how it goes so you still aint got hold of that opteron? Share this post Link to post Share on other sites More sharing options...
Recommended Posts
Please sign in to comment
You will be able to leave a comment after signing in
Sign In Now