Jump to content
Sign in to follow this  
Angry_Games

Socket 939 Overclocking Database

Recommended Posts

DFI LANPARTY nF4 Ultra-D (modded to SLI-D) (3/29/2006 BIOS)

 

AMD X2 3800+ dual core

 

2x1024MB Corsair XMS4000 PT

 

ATI X1900XT 512MB PCI-E, 7.8 CAT drivers

 

36GB Western Digital Raptor 10,000RPM SATA hdd

 

Asus 52x Quiet-Trak CD-ROM

 

OCZ Powerstream 520w Power Supply

 

 

 

*

*

 

 

 

*

*

 

==========

 

[b]Genie BIOS Settings:[/b]

[color=red]

FSB Bus Frequency.............................  -  250

LDT/FSB Frequency Ratio.......................  -  Auto

CPU/FSB Frequency Ratio.......................  -  Auto

PCI eXpress Frequency.........................  -  100Mhz



CPU VID StartUp Value.........................  -  1.500v



CPU VID Control...............................  -  Auto

CPU VID Special Control.......................  -  VID +110%

LDT Voltage Control...........................  -  1.20v 

Chip Set Voltage Control......................  -  1.50v

DRAM Voltage Control..........................  -  2.90v[/color]



[b]DRAM Configuration Settings:[/b]

[color=red]

DRAM Frequency Set............................  -  200=RAM/FSB:01/01

Command Per Clock (CPC).......................  -  Enable 

CAS Latency Control (Tcl).....................  -  03 Bus Clocks

RAS# to CAS# delay (Trcd).....................  -  04 Bus Clocks

Min RAS# active time (Tras)...................  -  09 Bus Clocks

Row precharge time (Trp)......................  -  04 Bus Clocks

Row Cycle time (Trc)..........................  -  12 Bus Clocks

Row refresh cyc time (Trfc)...................  -  24 Bus Clocks

Row to Row delay (Trrd).......................  -  03 Bus Clocks

Write recovery time (Twr).....................  -  03 Bus Clocks

Write to Read delay (Twtr)....................  -  02 Bus Clocks

Read to Write delay (Trwt)....................  -  03 Bus Clocks

Refresh Period (Tref).........................  -  3120 Cycles

DRAM Bank Interleave..........................  -  Enabled



DQS Skew Control..............................  -  Auto

DQS Skew Value................................  -  0

DRAM Drive Strength...........................  -  Auto

DRAM Data Drive Strength......................  -  Auto

Max Async Latency.............................  -  Auto

DRAM Response Time............................  -  Normal

Read Preamble Time............................  -  Auto

IdleCycle Limit...............................  -  256 Cycles

Dynamic Counter...............................  -  Disable

R/W Queue Bypass..............................  -  16 x

Bypass Max....................................  -  07 x

32 Byte Granularity...........................  -  Disable(4 Bursts)

[/color]

 

 

==========

 

 

Prime95 + 3dMark2001SE + CPU-Z + Everest 2.20:

 

http://www.angrygames.com/ocdb/angry/nf4/3...x2_250x10-1.gif

 

 

3dMark2003:

 

3800x2_250x10-2.gif

 

 

3dMark2005:

 

3800x2_250x10-3.gif

 

 

 

3dMark 2006:

 

3800x2_250x10-4.gif

 

 

Aquamark 3d:

 

3800x2_250x10-5.gif

 

 

 

==========

 

 

 

short description:

250x10 @ 2500Mhz

3-4-9-4 @ 2.90v vdimm

Share this post


Link to post
Share on other sites

DFI LANPARTY nF4 (3/29/06 BIOS)

 

AMD Opteron 180 Dual core

 

Zalman CNPS9700 Led CPU HSF

 

2x256mb Corsair CMX256A-3200C2

 

XFX GeForce 8800GTS 580M 320MB DDR3, 621/1053 6.14.011.6371 drivers

 

2xMaxtor 6L100MO Raid 0 186GB HDD

 

Lite-On DVDRW LH-20A1H DVD Drive

 

Antec TruePower 480w PSU

 

 

==========

 

[b]Genie BIOS Settings:[/b]

[color=red]

FSB Bus Frequency.............................  -  300

LDT/FSB Frequency Ratio.......................  -  Auto

CPU/FSB Frequency Ratio.......................  -  10

PCI eXpress Frequency.........................  -  105Mhz



CPU VID StartUp Value.........................  -  Startup



CPU VID Control...............................  -  1.325V

CPU VID Special Control.......................  -  Above VID * 126%

LDT Voltage Control...........................  -  1.40v 

Chip Set Voltage Control......................  -  1.70v

DRAM Voltage Control..........................  -  3.0v[/color]



[b]DRAM Configuration Settings:[/b]

[color=red]

DRAM Frequency Set............................  -  140=RAM/FSB:7/10

Command Per Clock (CPC).......................  -  Enable 

CAS Latency Control (Tcl).....................  -  2.0

RAS# to CAS# delay (Trcd).....................  -  03 Bus Clocks

Min RAS# active time (Tras)...................  -  07 Bus Clocks

Row precharge time (Trp)......................  -  03 Bus Clocks

Row Cycle time (Trc)..........................  -  Auto

Row refresh cyc time (Trfc)...................  -  14 Bus Clocks

Row to Row delay (Trrd).......................  -  Auto

Write recovery time (Twr).....................  -  Auto

Write to Read delay (Twtr)....................  -  Auto

Read to Write delay (Trwt)....................  -  Auto

Refresh Period (Tref).........................  -  Auto

Write CAS Latency (Twcl)......................  -  Auto

DRAM Bank Interleave..........................  -  Enabled



DQS Skew Control..............................  -  Auto

DQS Skew Value................................  -  0

DRAM Drive Strength...........................  -  Level 8

DRAM Data Drive Strength......................  -  Level 4(Reduce 00%)

Max Async Latency.............................  -  Auto

DRAM Response Time............................  -  Fast

Read Preamble Time............................  -  Auto

IdleCycle Limit...............................  -  256 Cycles

Dynamic Counter...............................  -  Disable

R/W Queue Bypass..............................  -  16 x

Bypass Max....................................  -  07 x

32 Byte Granularity...........................  -  Disable(4 Bursts)

[/color]

 

 

==========

 

 

Prime95 + 3dMark2001SE + CPU-Z + Everest 2.20:

 

th_OCDBEntry23ghzResize.jpg

 

 

3dMark2003:

 

th_OCDB3dMark03Resize.jpg

 

3dMark2005:

 

th_OCDB3dMark05Resize.jpg

 

 

 

3dMark 2006:

 

th_OCDB3dMark06Resize.jpg

 

 

 

==========

 

 

 

short description:

300 x 10: 3000mhz, 1.62Vcore

2-3-3-7 3.0Vdimm

Share this post


Link to post
Share on other sites

DFI LANPARTY nF4 SLI-DR Expert (406-BTA BIOS)

 

AMD Opteron 165 (CCBBE 0615 EPMW)

 

DD TDX waterblock, Swiftech MCR220-QP radiator, Laing D5 pump

 

2x1024MB OCZ PC4000EB (OCZ5001024EBPE)

 

eVGA GeForce 7800 GTX (256 MB), 491/650, 94.24 drivers

 

150GB Western Digital Raptor, 2x500 GB WD RE2 RAID1 on 3ware 9650SE-4LPML PCIe SATA controller

 

Lite-On LH-20A1L SATA burner, LG GDR8164B DVD-ROM

 

OCZ GameXStream 700w Power Supply

 

 

 

 

==========

 

[b]Genie BIOS Settings:[/b]

[color=red]

FSB Bus Frequency.............................  -  334

LDT/FSB Frequency Ratio.......................  -  3x

CPU/FSB Frequency Ratio.......................  -  9x

PCI eXpress Frequency.........................  -  100Mhz



CPU VID StartUp Value.........................  -  1.475v



CPU VID Control...............................  -  1.475

CPU VID Special Control.......................  -  Above VID * 104.8%

LDT Voltage Control...........................  -  1.20v 

Chip Set Voltage Control......................  -  1.52v

DRAM Voltage Control..........................  -  2.74v[/color]



[b]DRAM Configuration Settings:[/b]

[color=red]

DRAM Frequency Set............................  -  150=RAM/FSB:03/04

Command Per Clock (CPC).......................  -  Enable 

CAS Latency Control (Tcl).....................  -  3

RAS# to CAS# delay (Trcd).....................  -  3

Min RAS# active time (Tras)...................  -  8

Row precharge time (Trp)......................  -  2

Row Cycle time (Trc)..........................  -  09 Bus Clocks

Row refresh cyc time (Trfc)...................  -  13 Bus Clocks

Row to Row delay (Trrd).......................  -  02 Bus Clocks

Write recovery time (Twr).....................  -  02 Bus Clocks

Write to Read delay (Twtr)....................  -  02 Bus Clocks

Read to Write delay (Trwt)....................  -  03 Bus Clocks

Refresh Period (Tref).........................  -  3120 Cycles

Odd Divisor Correct...........................  -  Disabled

DRAM Bank Interleave..........................  -  Enabled



DQS Skew Control..............................  -  Auto

DQS Skew Value................................  -  0

DRAM Drive Strength...........................  -  Level 8

DRAM Data Drive Strength......................  -  Level 1 (Reduce 50%)

Max Async Latency.............................  -  8ns

DRAM Response Time............................  -  Normal

Read Preamble Time............................  -  5ns

IdleCycle Limit...............................  -  16 Cycles

Dynamic Counter...............................  -  Disable

R/W Queue Bypass..............................  -  16 x

Bypass Max....................................  -  06 x

32 Byte Granularity...........................  -  Disable(4 Bursts)

[/color]

 

 

==========

 

 

Orthos + 3DMark2001SE + CPU-Z (had 16x.xx FW installed w/2k1, dropped score by ~1050 vs 94.24):

 

ocdbthumb.png

 

 

 

3DMark2003:

 

2k3thumb.png

 

 

 

3DMark2005:

 

2k5thumb.png

 

 

 

3DMark 2006:

 

2k6thumb.png

 

 

 

AquaMark3:

 

am3thumb.jpg

 

 

 

==========

 

 

 

short description:

334x9 @ 3007 MHz, 1.54v

3-3-2-8 @ 2.74v vdimm

Share this post


Link to post
Share on other sites

DFI LANPARTY nF4 Ultra-D (7/04-2bta BIOS)

 

AMD X2 4200+ LCBQE 0723VPMW

 

2x1GB OCZ PC4000EB (OCZ5001024EBPE-K)

 

BFG 7950GT OC, (stock)

 

320GB Seagate Barracuda 7200.10 ST3320620AS SATA hdd

 

Antec Neo HE 550

 

==========

 

[b]Genie BIOS Settings:[/b]

[color=red]

FSB Bus Frequency.............................  -  323

LDT/FSB Frequency Ratio.......................  -  3

CPU/FSB Frequency Ratio.......................  -  9

PCI eXpress Frequency.........................  -  100Mhz



CPU VID StartUp Value.........................  -  auto



CPU VID Control...............................  -  1.375v

CPU VID Special Control.......................  -  auto

LDT Voltage Control...........................  -  1.30v 

Chip Set Voltage Control......................  -  1.60v

DRAM Voltage Control..........................  -  2.80v[/color]



[b]DRAM Configuration Settings:[/b]

[color=red]

DRAM Frequency Set............................  -  150=RAM/FSB:03/04

Command Per Clock (CPC).......................  -  Enable 

CAS Latency Control (Tcl).....................  -  2.5

RAS# to CAS# delay (Trcd).....................  -  3

Min RAS# active time (Tras)...................  -  7

Row precharge time (Trp)......................  -  2

Row Cycle time (Trc)..........................  -  9 Bus Clocks

Row refresh cyc time (Trfc)...................  -  12 Bus Clocks

Row to Row delay (Trrd).......................  -  02 Bus Clocks

Write recovery time (Twr).....................  -  02 Bus Clocks

Write to Read delay (Twtr)....................  -  01 Bus Clocks

Read to Write delay (Trwt)....................  -  02 Bus Clocks

Refresh Period (Tref).........................  -  3120 Cycles

DRAM Bank Interleave..........................  -  Enabled



DQS Skew Control..............................  -  Auto

DQS Skew Value................................  -  0

DRAM Drive Strength...........................  -  Normal 4 (Level 8)

DRAM Data Drive Strength......................  -  Level 2

Max Async Latency.............................  -  8 ns

DRAM Response Time............................  -  Normal

Read Preamble Time............................  -  6.5 ns

IdleCycle Limit...............................  -  128

Dynamic Counter...............................  -  Disable

R/W Queue Bypass..............................  -  16 x

Bypass Max....................................  -  07 x

32 Byte Granularity...........................  -  Disable(4 Bursts)

[/color]

 

 

==========

 

toledodiyxi3.th.jpg

 

3d03rv1.th.jpg

 

3d05tp3.th.jpg

 

3d06hu1.th.jpg

 

2906ju0.th.jpg

 

 

short description:

323x9 @ 2906Mhz, 1.375v

2.5-3-7-2 @ 2.80v vdimm

Share this post


Link to post
Share on other sites

DFI LANPARTY nF4 SLI-DR (11/14/2005)

 

AMD Opteron 165

 

2GB OCZ PC4000 Gold Edition Dual Channel Kit (OCZ5002048ELGE-K)

 

eVGA GeForce 7900GT CO, 500/1500 169.01 drivers

 

250GB Western Digital Caviar 7,200RPM SATA 3.0Gb/s HDD

 

LITE-ON Black LightScribe 5x DVD-RAM Burner

 

OCZ PowerStream 520w SLI Power Supply

 

 

 

*

*

*

*

 

==========

 

[b]Genie BIOS Settings:[/b]

[color=red]

FSB Bus Frequency.............................  -  310

LDT/FSB Frequency Ratio.......................  -  3x

CPU/FSB Frequency Ratio.......................  -  9x

PCI eXpress Frequency.........................  -  100Mhz



CPU VID StartUp Value.........................  -  StartUp



CPU VID Control...............................  -  1.375v

CPU VID Special Control.......................  -  Auto

LDT Voltage Control...........................  -  1.20v 

Chip Set Voltage Control......................  -  1.50v

DRAM Voltage Control..........................  -  2.60v[/color]



[b]DRAM Configuration Settings:[/b]

[color=red]

DRAM Frequency Set............................  -  166=RAM/FSB:05/06

Command Per Clock (CPC).......................  -  Enable 

CAS Latency Control (Tcl).....................  -  3

RAS# to CAS# delay (Trcd).....................  -  4

Min RAS# active time (Tras)...................  -  8

Row precharge time (Trp)......................  -  4

Row Cycle time (Trc)..........................  -  07 Bus Clocks

Row refresh cyc time (Trfc)...................  -  14 Bus Clocks

Row to Row delay (Trrd).......................  -  02 Bus Clocks

Write recovery time (Twr).....................  -  02 Bus Clocks

Write to Read delay (Twtr)....................  -  02 Bus Clocks

Read to Write delay (Trwt)....................  -  03 Bus Clocks

Refresh Period (Tref).........................  -  3120 Cycles

DRAM Bank Interleave..........................  -  Enabled



DQS Skew Control..............................  -  Auto

DQS Skew Value................................  -  0

DRAM Drive Strength...........................  -  Level 08

DRAM Data Drive Strength......................  -  Level 1

Max Async Latency.............................  -  8.0ns

DRAM Response Time............................  -  Normal

Read Preamble Time............................  -  06.0 ns

IdleCycle Limit...............................  -  Auto

Dynamic Counter...............................  -  Disable

R/W Queue Bypass..............................  -  16 x

Bypass Max....................................  -  07 x

32 Byte Granularity...........................  -  Disable(4 Bursts)

[/color]

 

 

==========

 

 

Orthos + 3dMark2001SE + 2x CPU-Z:

 

screen1yh0.th.jpg

 

3dMark2003:

 

screen2vm5.th.jpg

 

3dMark2005:

 

screen3ag6.th.jpg

 

 

3dMark 2006:

 

screen4kc0.th.jpg

 

 

==========

 

 

 

short description:

310x9 @ 2794Mhz, 1.375v vCore Voltage

3-4-4-8-2T @ 2.60v vDimm

Share this post


Link to post
Share on other sites

DFI LANPARTY NF4 Ultra-D (Merlin's 23.11.07)

 

AMD 165 Opteron

 

Stock Opteron Heatsink

 

2x1024MB OCZ GX XTC PC4000

 

ATI Radeon X1950pro 256mb

 

120GB Maxtor Diamond Max HDD Pata

 

Evercool VC-RE Chipset

 

Syncmaster 225BW

 

CoolerMaster Stacker 830

 

OCZ GameXstream 700W Sli

 

ultradtemplate1oj7.jpg

 

*****************

 

Genie BIOS Settings:

 

FSB Bus Frequency.............................  -  326
LDT/FSB Frequency Ratio.......................  -  x3
CPU/FSB Frequency Ratio.......................  -  x9
PCI eXpress Frequency.........................  -  100Mhz

CPU VID StartUp Value.........................  -  StartUp

CPU VID Control...............................  -  1.400v
CPU VID Special Control.......................  -  Auto
LDT Voltage Control...........................  -  1.20v 
Chip Set Voltage Control......................  -  1.50v
DRAM Voltage Control..........................  -  2.65v

DRAM Configuration Settings:

 

DRAM Frequency Set............................  -  150=RAM/FSB:03/04
Command Per Clock (CPC).......................  -  Enable 
CAS Latency Control (Tcl).....................  -  3
RAS# to CAS# delay (Trcd).....................  -  4
Min RAS# active time (Tras)...................  -  8
Row precharge time (Trp)......................  -  4
Row Cycle time (Trc)..........................  -  7 Bus Clocks
Row refresh cyc time (Trfc)...................  -  13 Bus Clocks
Row to Row delay (Trrd).......................  -  02 Bus Clocks
Write recovery time (Twr).....................  -  02 Bus Clocks
Write to Read delay (Twtr)....................  -  02 Bus Clocks
Read to Write delay (Trwt)....................  -  04 Bus Clocks
Refresh Period (Tref).........................  -  3120 Cycles
Odd Divisor Correct...........................  -  Disable
DRAM Bank Interleave..........................  -  Enabled

DQS Skew Control..............................  -  Auto
DQS Skew Value................................  -  0
DRAM Drive Strength...........................  -  Auto
DRAM Data Drive Strength......................  -  Level 1 (Reduce 50%)
Max Async Latency.............................  -  9ns
DRAM Response Time............................  -  Fastest
Read Preamble Time............................  -  6.0ns
IdleCycle Limit...............................  -  256 Cycles
Dynamic Counter...............................  -  Disable
R/W Queue Bypass..............................  -  16 x
Bypass Max....................................  -  07 x
32 Byte Granularity...........................  -  Disable(4 Bursts)

**************

 

Dual Prime95 + 3dMark2001SE + CPU-Z:

 

ocdbhs7.th.jpg

 

3dMark2003:

 

ocdb1jk8.th.jpg

 

3dMark2005:

 

ocdb2vr8.th.jpg

 

3dMark2006:

 

ocdb3ut3.th.jpg

 

Aquamark

 

ocdb4ib2.th.jpg

 

 

 

Short Description:

 

326x9 @ 2934Mhz, 1.400v

3-4-8-4 @ 2.65v vdimm

 

 

Logan

Share this post


Link to post
Share on other sites

DFI LANPARTY nF4 SLI-D (704-2BT BIOS)

 

AMD A64 3700+ San Diego KACAE 0546EPAW

 

2x1024MB G.Skill HX PC3200(DDR400) (F1-3200BIU2-2GBHX)

 

PNY GeForce 7800GT 256MB GDDR3, 400/1000Mhz Forceware 163.75 WHQL drivers

 

250GB Seagate Baracuda 7200.8 7,200RPM SATA NCQ 8MB Cache hdd (ST3250823AS)

 

NEC ND4550A DVD-RAM SuperMulti Drive 2MB Cache

 

Tagan TG530-U15 530w ATX v2.01 Modular Power Supply

 

==========

 

[b]Genie BIOS Settings:[/b]
[color=red]
FSB Bus Frequency.............................  -  311
LDT/FSB Frequency Ratio.......................  -  3x
CPU/FSB Frequency Ratio.......................  -  9x
PCI eXpress Frequency.........................  -  100Mhz

CPU VID StartUp Value.........................  -  1.500v

CPU VID Control...............................  -  1.325v
CPU VID Special Control.......................  -  113%
LDT Voltage Control...........................  -  1.20v 
Chip Set Voltage Control......................  -  1.50v
DRAM Voltage Control..........................  -  2.70v
DRAM Voltage adjustment +0.3v.................  -  Disabled[/color]

[b]DRAM Configuration Settings:[/b]
[color=red]
DRAM Frequency Set............................  -  150
Command Per Clock (CPC).......................  -  Enable 
CAS Latency Control (Tcl).....................  -  3
RAS# to CAS# delay (Trcd).....................  -  3
Min RAS# active time (Tras)...................  -  0
Row precharge time (Trp)......................  -  2
Row Cycle time (Trc)..........................  -  7 Bus Clocks
Row refresh cyc time (Trfc)...................  -  13 Bus Clocks
Row to Row delay (Trrd).......................  -  02 Bus Clocks
Write recovery time (Twr).....................  -  02 Bus Clocks
Write to Read delay (Twtr)....................  -  01 Bus Clocks
Read to Write delay (Trwt)....................  -  02 Bus Clocks
Refresh Period (Tref).........................  -  1032 Cycles
DRAM Bank Interleave..........................  -  Enabled

DQS Skew Control..............................  -  Auto
DQS Skew Value................................  -  0
DRAM Drive Strength...........................  -  Weak 4
DRAM Data Drive Strength......................  -  Level 3
Max Async Latency.............................  -  7.0 ns
DRAM Response Time............................  -  Normal
Read Preamble Time............................  -  6.0 ns
IdleCycle Limit...............................  -  16 Cycles
Dynamic Counter...............................  -  Enabled
R/W Queue Bypass..............................  -  16 x
Bypass Max....................................  -  07 x
32 Byte Granularity...........................  -  Disable(4 Bursts)
[/color]

 

==========

 

SP2004 + 3DMark 2001SE + CPUZ

704bt3dmark2001qy6.th.png

 

3DMark 03

704bt3dmark2003ly4.th.png

 

3DMark 05

704bt3dmark2005gu8.th.png

 

3DMark 06

704bt3dmark2006ka4.th.png

 

Aquamark 3

704btaquamarkve6.th.png

 

==========

 

short description:

311 x 9 = 2799MHz, 1.46v

3-3-0-2 @ 2.70 vdimm

Share this post


Link to post
Share on other sites

DFI LANPARTY nF4 Ultra D (04/06BTA BIOS)

 

AMD Opteron 165 CCBWE 0536MPMW(1800Mhz/1mb L2 per core)+ NO IHS

 

2x512MB Patriot XBL PC4800(TCCD)

 

EVGA GeForce 7600GT 256MB PCI-E 16x, 600/800 169.21 drivers

 

2x 74GB WD Raptor FLCO Sata hdds(raid0)+ 2x 80GB Hitachi Deskstar SataII hdds(raid0)

 

Nec 3550A Dvd R/W(Ide1)+LiteOn SOHW-1213S Dvd R/W(Ide2)

 

Thermaltake PurePower 460w Power Supply W0068(Not Recomended!!)

 

 

==========

 

[b]Genie BIOS Settings:[/b]
[color=red]
FSB Bus Frequency.............................  -  290 MHZ
LDT/FSB Frequency Ratio.......................  -  x 3.0
CPU/FSB Frequency Ratio.......................  -  x 9.0
PCI eXpress Frequency.........................  -  101Mhz

CPU VID StartUp Value.........................  -  1.45v

CPU VID Control...............................  -  1.325v
CPU VID Special Control....................... -  VID Special * 110%
LDT Voltage Control...........................  -  1.20v 
Chip Set Voltage Control......................  -  1.50v
DRAM Voltage Control..........................  -  2.70v
DRAM+.03V If it's not 3.2V....................  -  Enable[/color]

[b]DRAM Configuration Settings:[/b]
[color=red]
DRAM Frequency Set............................  -  140=RAM/FSB:07/10
Command Per Clock (CPC).......................  -  Enable 
CAS Latency Control (Tcl).....................  -  2.0
RAS# to CAS# delay (Trcd).....................  -  2
Min RAS# active time (Tras)...................  -  5
Row precharge time (Trp)......................  -  2
Row Cycle time (Trc)..........................  -  Auto
Row refresh cyc time (Trfc)...................  -  Auto
Row to Row delay (Trrd).......................  -  03 Bus Clocks
Write recovery time (Twr).....................  -  03 Bus Clocks
Write to Read delay (Twtr)....................  -  02 Bus Clocks
Read to Write delay (Trwt)....................  -  03 Bus Clocks
Refresh Period (Tref).........................  -  3120 Cycles
DRAM Bank Interleave..........................  -  Enabled

DQS Skew Control..............................  -  Auto
DQS Skew Value................................  -  0
DRAM Drive Strength...........................  -  Auto
DRAM Data Drive Strength......................  -  Auto
Max Async Latency.............................  -  Auto
DRAM Response Time............................  -  Fast
Read Preamble Time............................  -  Auto
IdleCycle Limit...............................  -  32 Cycles
Dynamic Counter...............................  -  Disable
R/W Queue Bypass..............................  -  16 x
Bypass Max....................................  -  07 x
32 Byte Granularity...........................  -  Disable(4 Bursts)
[/color]

 

==========

 

 

Orthos (SP2004) + 3dMark2001SE + 2x CPU-Z:

 

290x9ocdbpic1.jpg

 

 

3dMark2003:

 

290x9ocdbpic2.jpg

 

 

3dMark2005:

 

290x9ocdbpic3.jpg

 

 

 

3dMark 2006:

 

290x9ocdbpic4.jpg

 

Aquamark 3:

290x9ocdbpic5.jpg

 

 

 

==========

 

 

 

short description:

290x9 @ 2610Mhz, 1.45v cpu

2-2-5-2 @ 2.73v vdimm

Share this post


Link to post
Share on other sites

DFI CFX3200 DR/G

AMD Athlon 3800x2

4x512mb DDR 510 2.5 3 3 7

Seagate 16mb 250gb HDD

GeCube ATI HD 3850 512

LG IDE DVD-CD Burner Combo 2MB Cache

thermaltake toughpower 750w modular

 

http://valid.x86-secret.com/show_oc.php?id=258854

 

dont have time to resize.. you wouldnt be able to read 'em anyway if i did

 

sp1m.jpg

3dmark01.jpg

wprime.jpg

 

how do i reopen 3dr files fomr 3dmark06?

 

still adding to it

Share this post


Link to post
Share on other sites

DFI LANPARTY nF4 Ultra-D - BIOS 6/23/2005

AMD 64 X2 4200 (Manchester) 2x512kB L2 Cache,

Bios (704-22V6) Bigtoe Tweaked 704-2A/Memtest v1.65 Added by Tmod

Thermalright XP-90 and NMB Fans (3612KL-04W-B66)

Thermalright HR-05 SLI Chipset Cooler

G.SKILL F1-3200PHU2-2GBZX 2x1GB DDR400 PC3200, Model F1-3200PHU2-2GBZX

Silverstone Strider 560w, Model ST56F

Colorful Nvidia 8600GTS 256MB PCI-E x16 Video Card (745/1020)

Seagate 250GB SATA II 7200RPM 16MB Cache HDD

Lite-On DVD Writer + LG DVD ROM, Model SHM-165P6S + GDR-H30N

 

 

Genie BIOS Settings:

FSB Bus Frequency.............................  -  266
LDT/FSB Frequency Ratio.......................  -  x4.0
CPU/FSB Frequency Ratio.......................  -  10.0
PCI eXpress Frequency.........................  -  100Mhz

CPU VID StartUp Value.........................  -  1.5v

CPU VID Control...............................  -  1.475v
CPU VID Special Control.......................  -  Above VID *104%
LDT Voltage Control...........................  -  1.20v 
Chip Set Voltage Control......................  -  1.70v
DRAM Voltage Control..........................  -  2.80v

[b]DRAM Configuration Settings:[/b]
[color=red]
DRAM Frequency Set............................  -  200=RAM/FSB:01/01
Command Per Clock (CPC).......................  -  Enable 
CAS Latency Control (Tcl).....................  -  03 Bus Clocks
RAS# to CAS# delay (Trcd).....................  -  03 Bus Clocks
Min RAS# active time (Tras)...................  -  05 Bus Clocks
Row precharge time (Trp)......................  -  02 Bus Clocks
Row Cycle time (Trc)..........................  -  15 Bus Clocks
Row refresh cyc time (Trfc)...................  -  17 Bus Clocks
Row to Row delay (Trrd).......................  -  02 Bus Clocks
Write recovery time (Twr).....................  -  03 Bus Clocks
Write to Read delay (Twtr)....................  -  02 Bus Clocks
Read to Write delay (Trwt)....................  -  04 Bus Clocks
Refresh Period (Tref).........................  -  Auto
Write CAS Latency (Twcl)......................  -  1
DRAM Bank Interleave..........................  -  Enabled

DQS Skew Control..............................  -  Off
DQS Skew Value................................  -  0
DRAM Drive Strength...........................  -  Auto
DRAM Data Drive Strength......................  -  Auto
Max Async Latency.............................  -  08.0 Nano Seconds
DRAM Response Time............................  -  Normal
Read Preamble Time............................  -  06.0 Nano Seconds
IdleCycle Limit...............................  -  256 Cycles
Dynamic Counter...............................  -  Disable
R/W Queue Bypass..............................  -  16 x
Bypass Max....................................  -  04 x
32 Byte Granularity...........................  -  Disable(4 Bursts)

[/color]

 

 

Prime95 + 3DMark2001SE + CPU-Z:

 

http://i62.photobucket.com/albums/h89/gmieroxx/post1.jpg

 

3DMark2003:

 

http://i62.photobucket.com/albums/h89/gmieroxx/post2.jpg

 

 

3DMark2005:

 

http://i62.photobucket.com/albums/h89/gmieroxx/post3.jpg

 

 

3DMark2006:

 

http://i62.photobucket.com/albums/h89/gmieroxx/post4.jpg

 

Aquamark3:

 

http://i62.photobucket.com/albums/h89/gmieroxx/post5.jpg

 

Short Description:

266x10 @ 2660Mhz, 1.475v + 104%

3-3-5-2 @ 2.8v vdimm

Share this post


Link to post
Share on other sites
Guest SuppA-SnipA

DFI LANPARTY nF4 NF4-D (xxx BIOS)

 

AMD Athlon 4000+

 

2x1024MB OCZ PC3200 (OCZ4002048PFDC-K)[/size]

 

XFX GeForce 8600 GTS, 675 MHz / 1008MHz, 169.21 Drivers

 

160GB, 200GB Western Digital SATA hdd's and 30gb notebook hdd (osx86 Leopard)

 

Samsung SH-182M DVD-RW drive

 

Antec Truepower Trio 650Watt

 

 

 

BIOS screenshots

 

biosmain1bg0.th.jpg

biosmain2mn6.th.jpg

dramnk7.th.jpg

dram2rf9.th.jpg

 

 

==========

 

[b]Genie BIOS Settings:[/b]

[color=red]

FSB Bus Frequency.............................  -  246

LDT/FSB Frequency Ratio.......................  -  x 4

CPU/FSB Frequency Ratio.......................  -  x 11

PCI eXpress Frequency.........................  -  100Mhz



CPU VID StartUp Value.........................  -  Startup	



CPU VID Control...............................  -  1.375 V

CPU VID Special Control.......................  -  Auto

LDT Voltage Control...........................  -  1.20v 

Chip Set Voltage Control......................  -  1.50v

DRAM Voltage Control..........................  -  2.70v[/color]



[b]DRAM Configuration Settings:[/b]		

[color=red]

DRAM Frequency Set............................  -  180=RAM/DRAM/FSB:9/10

CAS Latency Control (Tcl).....................  -  3.0

RAS# to CAS# delay (Trcd).....................  -  03 Bus Clocks

Min RAS# active time (Tras)...................  -  07 Bus Clocks

Row precharge time (Trp)......................  -  03 Bus Clocks

Row Cycle time (Trc)..........................  -  Auto

Row refresh cyc time (Trfc)...................  -  Auto

Row to Row delay (Trrd).......................  -  Auto

Write recovery time (Twr).....................  -  Auto

Write to Read delay (Twtr)....................  -  Auto

Read to Write delay (Trwt)....................  -  Auto

Refresh Period (Tref).........................  -  Auto

Write CAS Latency (Twcl)....................... -  Auto

DRAM Bank Interleave..........................  -  Enabled



DQS Skew Control..............................  -  Auto

DQS Skew Value................................  -  0

DRAM Drive Strength...........................  -  Auto

DRAM Data Drive Strength......................  -  Level 4

Max Async Latency.............................  -  07.0 Nano Seconds

Read Preamble Time............................  -  Auto

IdleCycle Limit...............................  -  256 Cycles

Dynamic Counter...............................  -  Disable

R/W Queue Bypass..............................  -  16 x

Bypass Max....................................  -  07 x

32 Byte Granularity...........................  -  Disable(8 Bursts)

[/color]

 

 

 

==========

 

 

Orthos + 3dMark2001SE + CPU-Z x2:

cpuz3dmark2001orthoskm3.th.jpg

 

3dMark2003:

3dmark03tt3.th.jpg

 

3dMark2005:

3dmark05jx5.th.jpg

 

3dMark 2006:

3dmark06wg7.th.jpg

 

==========

 

short description:

246x11 @ 2706Mhz, CPU Vcore 1.375

3-3-3-7 @ 2.70v vdimm

Share this post


Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
Sign in to follow this  

×