soundx98 Posted August 25, 2007 Posted August 25, 2007 Download the latest ATITool here http://www.techpowerup.com/wizzard/ATITool_0.27b2.exe After Installation open settings and select "temperature monitoring" Send GPU to sensor 5 and GPU Env to Sensor 6, Make sure you then select in MBM5>Temperatures>Sensor 6 (Rename to GPU) and "Custom". Then Sensor 6 (Rename GPU ENV) and "Custom". Then Make sure you have selected to display sensors 5 & 6 in the MBM5 Dashboard. Should be good to go. ATI Tool must be running for it to display Let me know if you have any issues. Share this post Link to post Share on other sites More sharing options...
ebdoradz Posted August 25, 2007 Posted August 25, 2007 thnx for the fast reply SoundX you're da man Share this post Link to post Share on other sites More sharing options...
soundx98 Posted August 25, 2007 Posted August 25, 2007 my pleasure bro Share this post Link to post Share on other sites More sharing options...
faheyd Posted October 4, 2007 Posted October 4, 2007 Ok figured out the VBAT as well and added the following into the voltage.ini: [Winbond W83627THF-A] VT=6 V6=Asus P5N-E SLI V6V1=$20*0.016 // CORE0 V6V2=255 // CORE1 V6V3=$21*0.016 // 3.3V V6V4=$23*0.016*1.68 // 5V V6V5=$24*0.016*4 // 12V V6V6=255 // -12V V6V7=255 // -5V V6V8=$28*0.016 // VBAT This combined with the sensors mentioned in my previous post seems to have sorted everything. I have attached a screenshot of my dashboard. Temps seem a little high for stock settings with stock fan (approx 53 deg Celsius for the cores idle). I'm still setting things up and haven't even looked at overclocking yet but looks like it might be worth taking off the heatsink and applying some Arctic Silver as I don't know what the shop did when they installed everything but I suspect they used the thermal pad that came with the processor. Thanks for the help, Opener EDIT: This is on my new system for which I don't have a sig yet, Asus P5NE-SLI, Q6600, 8800GTS, OCZ 2GB memory. To make this to work for me, I opened up the voltage.ini file in the MBM5/Data directory (after installing MBM and patch 3 to the correct directory). In the voltage.ini file I searched for [Winbond W83627THF-A] and then changed VT=5 to VT=6 and pasted what Opener said to: V6=Asus P5N-E SLI V6V1=$20*0.016 // CORE0 V6V2=255 // CORE1 V6V3=$21*0.016 // 3.3V V6V4=$23*0.016*1.68 // 5V V6V5=$24*0.016*4 // 12V V6V6=255 // -12V V6V7=255 // -5V V6V8=$28*0.016 // VBAT (edit note: the '255' above means no readings) To get VBatt to show up on my P5N-E, I had to do the following: In the Settings/Voltages panel, select sensor 8. Change "Should display board sensor" to MBM Fixed. Then change "Voltage Configuration" to 'Asus P5N-E SLI'. Click on Visual, change name to VBatt, and click on Display this voltage in the dashboard screen. I changed everything to digital readouts except for CPU usage outputs. I'll see if I can post a pic in a minute, I have to reboot to get the drives to show up in MBM too. Thanks Soundx98 and Opener for the info, I couldn't have done it on my own in a million years. Share this post Link to post Share on other sites More sharing options...
soundx98 Posted October 12, 2007 Posted October 12, 2007 Some great work dudes. We appreciate all your efforts faheyd and opener. I'll add a link to your post on in 1st page of thread. Share this post Link to post Share on other sites More sharing options...
alexmex Posted October 27, 2007 Posted October 27, 2007 I'm trying to get the MBM 5 with an Intel SE7520JR2 with double Xeon. At first I tried with the wizard, then I found in this blog that the wizard didn't work. I tried then to configure it without the wizard without success. Can someone help me with this board? Share this post Link to post Share on other sites More sharing options...
faheyd Posted October 29, 2007 Posted October 29, 2007 I'm trying to get the MBM 5 with an Intel SE7520JR2 with double Xeon.At first I tried with the wizard, then I found in this blog that the wizard didn't work. I tried then to configure it without the wizard without success. Can someone help me with this board? I looked at your manual: http://download.intel.com/support/motherbo...0jr2tpsrev1.pdf and can only say, Try using the config wizard and the select 'uguru' and see what happens. Did the board come with a cd with any 'utilities' or extras? Share this post Link to post Share on other sites More sharing options...
E-M@iLinAtoR Posted November 10, 2007 Posted November 10, 2007 Change log:* re-uploaded the plugins as they misteriously dissapeared... MBM5Rivatuner.rar = plugin dll MBM5Rivatuner_src.rar = source code Can some1 plz update the Links, or send me the Files, would need em bad! Thanks! Share this post Link to post Share on other sites More sharing options...
soundx98 Posted November 10, 2007 Posted November 10, 2007 don't have the RivaTuner anymore. Not sure it still works with the latest v of RivaTuner here's all I got http://premium1.uploadit.org/soundx98//soundx98.rar Share this post Link to post Share on other sites More sharing options...
alexmex Posted November 16, 2007 Posted November 16, 2007 I looked at your manual: http://download.intel.com/support/motherbo...0jr2tpsrev1.pdf and can only say, Try using the config wizard and the select 'uguru' and see what happens. Did the board come with a cd with any 'utilities' or extras? I don't understand what 'uguru' means. The board has a CD of utilities but we tried to install them in another servers and the program seems to corrupt the OS. I will try to install it again. Share this post Link to post Share on other sites More sharing options...
faheyd Posted November 18, 2007 Posted November 18, 2007 I don't understand what 'uguru' means.The board has a CD of utilities but we tried to install them in another servers and the program seems to corrupt the OS. I will try to install it again. Disregard what I said, as I tried to select uguru and it doesn't show up in the selection (although I've read somewheres that uguru does work). I have no idea how to enable or select it. It's in the .ini files. Share this post Link to post Share on other sites More sharing options...
freecableguy Posted December 17, 2007 Posted December 17, 2007 I've updated my MBM5 coretemp plugin to work with 64-bit systems (had to make a 64-bit driver). I also demonstrate, using the files included in my download, how to get MBM5 running on a x64 system without the need for any crazy hacks. I hope someone besides me still like to use MBM5 and runs Vista 64-bit: http://www.thetechrepository.com/showthread.php?t=74 -FCG Share this post Link to post Share on other sites More sharing options...
Recommended Posts
Please sign in to comment
You will be able to leave a comment after signing in
Sign In Now