ReelFiles Posted December 2, 2006 Posted December 2, 2006 The side panel for the WaveMaster I bought, I didn't mod it myself, I like it a lot too. I didn't think the window on the Tsunami was bad at all, nice and strong, and I like the shape of it. The Tsunami is laid out better and has good airflow but the WaveMaster is built stronger with crap airflow, it needs room for some 120's. I was actually pleasantly surprised that the WaveMaster has a removable mobo tray, that was one of the things I really didn't like about the Tsunami. Share this post Link to post Share on other sites More sharing options...
HITandRUN Posted December 2, 2006 Posted December 2, 2006 Just realized that I haven't posted any pics since I got this WaveMaster. The only thing I modified so far is the front PSU bracket since it was in the way of my Strider's modular connectors. crappy night shot, the UV reactive slots don't even show. Hey ReelFiles, nice rig! Do you really use the monitor in picture for gaming? Thats like 17" or something or is it just the picture that makes it look so small? If yes you are due for an updrade!!! He He! Share this post Link to post Share on other sites More sharing options...
Guest PP Mguire Posted December 2, 2006 Posted December 2, 2006 Hey whats wrong with still using a 17" CRT? I have one...... Share this post Link to post Share on other sites More sharing options...
Ice Rich Posted December 2, 2006 Posted December 2, 2006 Considering I'm using a Tagen PSU (Huge amount of cables), Im really please how tidy i've managed to get my case... Tidy the case up a bit. Fitted an Accelero + Geil 'one' Ram Share this post Link to post Share on other sites More sharing options...
ReelFiles Posted December 2, 2006 Posted December 2, 2006 Hey ReelFiles, nice rig! Do you really use the monitor in picture for gaming? Thats like 17" or something or is it just the picture that makes it look so small? If yes you are due for an updrade!!! He He! Thanks. Yeah it's a 17", I rarely play games on it, I encode videos mostly. Occasionally I'll play AOE III or UT. I want to get an LCD just for space sake, but I am not too worried about it. Also the picture quality is better on my CRT. Share this post Link to post Share on other sites More sharing options...
Kilamon Posted December 4, 2006 Posted December 4, 2006 Well this is the first time I've shown my rig on a forum so be honest. Sorry if the pics are kinda crappy.------- My desk with my new Samsung 225bw. So tell me what you think. BTW this is my very updated first build. The only things originial in my pc is my hard drive and my dvd drive, everything else got upgraded over the course of a year and a half. 3M makes these cool little clips that you can get at home depot and office supplies, like these at Office Depot. If you do a search on "3M command" you should get something that will fit your requirement. Share this post Link to post Share on other sites More sharing options...
elhef Posted December 4, 2006 Posted December 4, 2006 There must be a million pounds worth of kit displayed on here, heres some more too add, check out these neons ! :dog: woof Share this post Link to post Share on other sites More sharing options...
Guest PP Mguire Posted December 5, 2006 Posted December 5, 2006 Yea that guys case sucks. Whats the point of having UV if its coverd by the white and his cable management is horrible. Share this post Link to post Share on other sites More sharing options...
Angry_Games Posted December 6, 2006 Posted December 6, 2006 ok, had the camera out today for some other pics and decided to snap a few as the lab pc's are getting a little reorganized (ie: building a new machine for momma since hers is probably 18 months old?). http://www.angrygames.com/pics/cases/lab/ the pics are all at full resolution or cropped from full resolution except for one. Momma's old rig: DFI LanParty NF4-D (modded to SLI-D) AMD64 4000+ San Diego @ 2400Mhz (stock speed) 2x1GB OCZ Platinum DDR400 2-3-5-2 XFX 7800GT 256MB PCI-E w/Arctic Cooling Accelero Creative Audigy2 ZS PCI sound 2x36GB WD Raptor @ RAID-0 Fortron "Blue Storm" 500w psu Thermalright XP-90 w/Enermax 92mm adjustable fan Chieftech Dragon all-aluminum ATX case Aspire 4-channel LCD fan controller (that beeps constantly and drives her crazy since I never set the fan alarms haha) Then there's what she's going to be using once her college semester is over and I can change her out without worry, these are pre-build stages (getting all the overclocks and such tested out to make sure no problems). I'll be going almost-passive in the cooling for this machine. The cpu has a Thermalright Ultra-90 passive heatpipe on it, and the chipset has the Thermalright HR-05 passive chipset heatpipe on it. The ATI X1900XT 512MB has an Arctic Cooling Accelero X1 on it, and is dead silent until you get into some heavy 3d games, then it is BARELY audible. Only thing I don't like is that it expels heavy heat, especially with the card clocked to 675/750 right now, and most likely a final clock of 700/750, right out the bottom at the PCI-E slot. I'll devise an expulsion/exhaust cooling setup somehow though that will stay low noise or possibly silent. Then there's the Hiper 580w. While this psu is not dead silent, even under full load it is barely audible. As silent as the Fortron psu she already has in her rig. I've got a Sunbeam 4-channel fan controller going into a Coolermaster Centurion Elite ($39 @ SVC! and Thunda already has one and loves it) with silent Coolermaster 120mm in the front and rear, a couple of silent Coolermaster 80mm's on the side and probably another 120mm Coolermaster in the bay area (these cases are mesh-front for airflow just like Stacker and Centurion!). DFI Infinity Ultra-II M2 (Socket AM2) AMD64 X2 4800+ Windsor (2x1MB L2, 2400Mhz stock) @ 225x12 (2707Mhz) 2x1GB OCZ Gold GX DDR2-1000 5-6-6-15 ATI X1900XT 512MB PCI-E w/Arctic Cooling Accelero X1 2x80GB Hitachi SATA II @ RAID-0 Creative Audigy2 ZS (not installed yet) NEC 3500A DVD-RW Hiper Type R 580w modular psu Coolermaster Elite ATX case Thermalright Ultra-90 passive cpu cooler + Thermalright HR-05 SLI passive chipset cooler Sunbeam 4-channel fan controller fans, some fans, a couple of fans, more fans, and then a fan or two And then there's the faithful server... Skyhawk all-aluminum case (Lian Li clone! impossible to find now but were $29 @ newegg! DFI Lanparty Pro 875A Intel Pentium 4 Northwood 3.4Ghz Engineering Sample (800FSB, Hyperthreaded) 2x1GB Corsair TwinX2048 Platinum (UCCC's) Sapphire Radeon 9500NP (modded to 9700Pro) AGP 128MB Seasonic S12-600 psu 80GB IDE IBM Deathstar boot drive 2x 160GB Hitachi storage drives RAID-1 (one IDE w/SATA converter) 2x 250GB Seagate 7200.10 external enclosure backup/storage drives Thermalright XP-120 cpu cooler + 120mm Coolermaster fan Sunbeam 4-channel fan controller well that about covers is for now other than this new rig I built and am testing: http://www.angrygames.com/Corsair/Nautilus/ Vigor Gaming ATX case (customized CM Stacker!) Corsair Nautilus 500 watercooling w/ Corsair gpu waterblock for 7xx0 series gpu's DFI Infinity 975X/G Intel Core2Duo E6400 (2.13Ghz stock speed) @ 400x8, 3200Mhz 2x1GB Corsair XMS2 Dominator DDR2-1066 2x Leadtek 7950GT 256MB PCI-E @ SLI w/84.56mod2 drivers OCZ GamerXstream 700w psu 250GB Seagate 7200.10 16mb cache hdd NEC 3550A DVD-RW Sunbeam 4-channel fan controller Corsair Dominator memory cooler always fans ok that's my 'picture blog' for now Share this post Link to post Share on other sites More sharing options...
Angry_Games Posted December 6, 2006 Posted December 6, 2006 ps: some temps from the semi-passive cooling (have silent 120mm fans blowing over the general area(s) ) idle: load: Share this post Link to post Share on other sites More sharing options...
s10man69 Posted December 7, 2006 Posted December 7, 2006 I love my SKYHAWK Case, it's not my main case, but....I still love it..19.99 when I got my +3500 from the egg a year ago!! I'm modding it right now...want me to post up a worklog here @ the street? Share this post Link to post Share on other sites More sharing options...
Angry_Games Posted December 8, 2006 Posted December 8, 2006 ya man that's what the mod section is for I'm gonna show everyone momma's new rig when it's all built up Share this post Link to post Share on other sites More sharing options...
Recommended Posts
Please sign in to comment
You will be able to leave a comment after signing in
Sign In Now