Furmark Gpu Benchmark Scores [obsolete]

[Speedway]

well at 100% fan speed my cards temps are at about 75-85C, voltage at 1137

 

What are your clocks? I will set my card exactly as yours and see where my temps are if you want!

[Shadowtroop]

What are your clocks? I will set my card exactly as yours and see where my temps are if you want!

 

 

im at 850core and 1200 memory

[Nyt]

What drivers were you guys using when you do your runs ? Because when I use the 10.7 driver it makes the screen flicker in Furmark and I get low scores .

[joel.monteiro]

yea even i noticed when i play games the screen flickers occasionally but game work flawlessly ,i can play warhead @1920x1080 with enthusiast settings no AA,but this game looks amazing with all settings on full,its neday better than gamer.

[Nyt]

No, when I say the screen flickers it means non-stop. Every frame has lines that keep re-appearing and dissappearing and the performance is terrible.

[Shadowtroop]

i stick with 10.5

[Nyt]

Im going to get 10.5 and then I can benchmark properly .

 

@Speedway: I got to 1000mhz core and 1300mhz mem fine its just that these driver dont work well so once I fix up that problem then I can get in my overclocked runs. With that 20k score were you using the 8800gts for PhysX and was it around 16k before you used it?

[Speedway]

Im going to get 10.5 and then I can benchmark properly .

 

@Speedway: I got to 1000mhz core and 1300mhz mem fine its just that these driver dont work well so once I fix up that problem then I can get in my overclocked runs. With that 20k score were you using the 8800gts for PhysX and was it around 16k before you used it?

 

 

I use the 10.7 drivers with no problem at all! I'm going to say i think the screen flickering you see might be an unstable overclock more than the drivers. But after you try the 10.5 make sure you update here with your results. But, the only time i see the screen flickering is when I'm overclocking heavy and it becomes unstable. I always had the 8800gts installed, on the 16k and the 20k runs. So thats not where I was getting the 4k jump. The only thing I did differently on the run I scored 20k on was shut almost all programs down in msconfig, restarted, and then opened furmark and ran the benchmark.

[Shadowtroop]

holy cow heres my latest, what setting do you guys use with catalyst AI?

 

16584

 

http://www.ozone3d.net/benchmarks/furmark_score_180.php?id=fbef1e9a22f13101037408d41ccd0f9e

Edited August 15, 2010 by Shadowtroop

[CowKing]

HD 5670 850 core, 1050 memory

 

http://www.ozone3d.net/benchmarks/furmark_score_180.php?id=20afe0772a7544f558d7de5bffeb603d

[Nyt]

I use the 10.7 drivers with no problem at all! I'm going to say i think the screen flickering you see might be an unstable overclock more than the drivers. But after you try the 10.5 make sure you update here with your results. But, the only time i see the screen flickering is when I'm overclocking heavy and it becomes unstable.

In Furmark my screen flickers even at stock ! I've seen on the web that some guys say that the 9.12 hotfix driver is the best to benchmark with so Im going to try that .

[Shadowtroop]

In Furmark my screen flickers even at stock ! I've seen on the web that some guys say that the 9.12 hotfix driver is the best to benchmark with so Im going to try that .

 

 

did you restart your computer, i was OCing like crazy a few days ago and it started to do some crazy artifacting on anything 3D even on stock. I restarted and it seemed to fix it