v8vega350

i am suprised it took 2 boards before you started to hate them

my bored witout the bios would only do 227 without mods. this bios will help you with fsb so if your at the peek of your chip mhz if you have an unlocked chip go down with your multi and up with your fsb to get more bandwidth out of your memory. i chose the 2nd link down from the top edc 4227 18 .bin .zip

has the bios been updated recently

this may be old news here but i figured i would post anyways just incased24 bios i downloaded the 4227 bin and with stock cooling and an unmodded nf7-s stock cooling nothing special i couldnt run my ram in sync but here you go my fsb

here are 2 things about the new nf7-s2 also doesnt have support for multi adjusments and there isnt anything below cas 2.5 for the ram click here if this cant be posted here please remove read 2nd post

in my quest for unlocked durons i came accross 3 0403's 2 were locked and 1 was unlocked all the same week all the same steping all within 8 chips of each other when being made. this is for one of the locked durons pics are of the chip for sale temps are to high to go any more but i know it will do it these temps are with a sk7 nothing special and the white goop that the hsf came with. with a better hsf temps would be way lower i am asking 55usd shipped sorry if the price is high but i am buying them localy sorry i fogot to mention that the top line in the gray box is vcore

very power hungry i am having problem with a sparkle psu in mine now that i have a chip that does more the 2.5 ghz the 12v line from the monitors say that i have around 11.37-11.43v wile its at 2.6ghz and only with 1.82 vcore i would say they need at least a good name brand 400watt or more psu as far as the under volting of the cpu and stuff i have heard it both ways that it does and doesnt undervolt

it is stable enough for me it ran prime for about 2 hours and had no problem at 2600 then i shut it off

1800+ retail from newegg 0334 niucb wpmw dlt3c runs prime 95 stable for a few hours at 2600mhz then i shut it off at 2645 i get reboots even with a pelt so i think i am at my psu limits, my 12v line gets kinda low not bad for a 56 dollar chip

my 0319 1700+ goes from 1470 to 2525 over 1gig overclock and remember high end air cooling is just as good as water but water isnt as loud

my 1700 goes farther then my 2100 did at stock volts 1.5 for the 1700 got me 2200mhz+ and 1.6 for the 2100 got me just below the 2200 mark i have had 2 1700's and 1 2100 and the best one is my 0319 wpmw 1700+ it goes farther and runs the same temp as my 2100 at a lower voltage. anyways if you can get one of these 0319 wpmw's they arnt pushed as hard as the 2100's are to reach the same mhz as far as you psu if it is a good psu it should work just find if it is generic i would reccomend a better one but try it after you get your new stuff you never know. and a little info on the newer 1700's they seam to draw alot of power from the 12v side (weird) with my 2100 my 12v side was above 12v with the 1700 its 11.49 @ 2550mhz on a nf7-s 2.0 if you dont have a board already and you looking to spend around 100 dollars i would recomend the nf7 line of boards lots of overclocking lots of voltage without mods to the board. as far as the north bridge cooler on my nf7-s i have the stock cooler and it does fine for me 227 mhz fsb before i have any problems i have seen people taking these boards to 250 fsb but i am not as cool as those people my .02 have fun

chips ive owned tbred b's all on water 0310 wpmw dlt3c 1700+ 2434stable 2475max 2500 on icewater 0307 ???? dut3c 2100+ 2500stable 2550max 2600+ on icewater 0319 wpmw dlt3c 1700+ 2525 stable 2610max not sure one ice water

all i can say is my nf7-s has not died and i love it

plug it in it a extra 2 12v lines i have to use mine if i dont my 12v rail is .2v lower without it and my atx connector 12v line almost starts to melt (not really but really hot) if you have it use it

great voltages without mods nf7-s 2.0 $109 nf7 non s $89 i have a nf7-s 2.0 the only board i liked better was my kr7a-133r but its kinda out of date now