Praz Posted September 5, 2006 Posted September 5, 2006 Here are the two OCDB entries. 3050/2GB 3050/4GB These are the 3 settings I had to change. Without the voltage increase I received Memtest errors after a few hours. RP was changed in order to boot into Windows and I changed Trwt because of errors in Memtest for Windows. DRAM Voltage: 2GB-2.64V 4GB-2.80V Trwt: 2GB-02 4GB-03 RP: 2GB-3.0 4GB-5.5 Share this post Link to post Share on other sites More sharing options...
allthatwhichis Posted September 5, 2006 Posted September 5, 2006 Here are the two OCDB entries.3050/2GB 3050/4GB These are the 3 settings I had to change. Without the voltage increase I received Memtest errors after a few hours. RP was changed in order to boot into Windows and I changed Trwt because of errors in Memtest for Windows. DRAM Voltage: 2GB-2.64V 4GB-2.80V Trwt: 2GB-02 4GB-03 RP: 2GB-3.0 4GB-5.5 Cool, thanks! I remember when I first got the first pair of HZs they got errors with even a little voltage. They like 2.5+0.03 It registers as 2.6 sometimes, 2.5 others... I haven't tried with all 4. I tend to blow a breaker when I do a laser show and have 2 computers on at the same time... This blue laser take a LOT of power to run. but it's about over. edit: memtest on 4 gigs is gonna take forever!!! Share this post Link to post Share on other sites More sharing options...
allthatwhichis Posted September 5, 2006 Posted September 5, 2006 After one pass it got one error. Test 6. I need to do something so I restarted, but it had gotten to test 7 on the second pass with no errors... This board seems like it'll go a tenth of a step on almost all the settings... I'll bump the RAM a tenth a volt and memtest again. Share this post Link to post Share on other sites More sharing options...
allthatwhichis Posted September 5, 2006 Posted September 5, 2006 Nice entry likewhoa... my 165 is envious... Share this post Link to post Share on other sites More sharing options...
likewhoa Posted September 5, 2006 Posted September 5, 2006 Nice entry likewhoa... my 165 is envious... setup your signature so I can see your system's specs Share this post Link to post Share on other sites More sharing options...
allthatwhichis Posted September 5, 2006 Posted September 5, 2006 setup your signature so I can see your system's specs :confused: My sig is two posts up... I just chose not to show it the last 2 posts. Since the last 3 posts are from me I didnt want to clutter the thread up. I have an opty 165 in the sli-dr that I just swapped out of the sig above. It a crappy stepping, ccbwe 0551. It's running 2.7, 300x9, not totally stable, with my ocz plat elites. If I can get it stable i might throw a sig together with both setups. But for now it's just the 148 in the sig. Share this post Link to post Share on other sites More sharing options...
red930 Posted September 6, 2006 Posted September 6, 2006 likewhoa, Where'd your prime 95 pic go in your last OCDB entry,didn't use orthos again did ya? Share this post Link to post Share on other sites More sharing options...
likewhoa Posted September 6, 2006 Posted September 6, 2006 likewhoa, Where'd your prime 95 pic go in your last OCDB entry,didn't use orthos again did ya? LOL ofcourse I did , but here is my new entry OCDB entry 303. hey wanna see some . & pimps? MA . & Pimps. Share this post Link to post Share on other sites More sharing options...
red930 Posted September 6, 2006 Posted September 6, 2006 LOL ofcourse I did , but here is my new entry OCDB entry 303.hey wanna see some . & pimps? MA . & Pimps. That's the entry I'm talking about,there is no SS of prime:confused: Share this post Link to post Share on other sites More sharing options...
OldGuy Posted September 6, 2006 Posted September 6, 2006 That's the entry I'm talking about,there is no SS of prime:confused: His linkage looks broke but it works...24+ hours dual prime. Nice job!! Share this post Link to post Share on other sites More sharing options...
Roger_D25 Posted September 6, 2006 Posted September 6, 2006 I don't know OldGuy, I see absolutly nothing at all under "Prime95 + 3dMark2001SE + CPU-Z", no linky broke or fixed? It might be something to do with my browswer though as I'm using FF. Share this post Link to post Share on other sites More sharing options...
OldGuy Posted September 6, 2006 Posted September 6, 2006 I don't know OldGuy, I see absolutly nothing at all under "Prime95 + 3dMark2001SE + CPU-Z", no linky broke or fixed? It might be something to do with my browswer though as I'm using FF. I get the little white box with an "x" in it but it does work for me using internet explorer... Share this post Link to post Share on other sites More sharing options...
Recommended Posts
Please sign in to comment
You will be able to leave a comment after signing in
Sign In Now