Splave Posted March 3, 2007 Posted March 3, 2007 EVGA 122-CK-NF68-AR SLI, F8 BIOS Crucial Ballistix Tracer 2GB (2 x 1GB) DDR2-800 Intel Celeron D 352 3.20GHz 512kb L2 65nm PNY 7900gS 256MB PCI-E 16x 590/1380 94.75 drivers Western Digital Caviar SE WD800JD 160GB 7200 RPM 8MB Cache SATA 3.0Gb/s SAMSUNG 18x IDE DVD-RW OCZ GameXstream ATX12V 850W Power Supply Scythe Infinity Cooling * * * * ========== [b]FSB & Memory Config[/b] CPU Freq, Mhz....................... - 4200.0 CPU Multiplier...................... - 24x FSB - Memory Clock Mode............. - Unlinked FSB - Memory Ratio ................. - Auto FSB - QDR (Mhz)..................... - 700 MEM (DDR), Mhz...................... - 800 [b]Memory Timing Setting[/b] Memopry Timing Setting.............. - Expert tCL (CAS Latency)................... - 4 tRCD................................ - 4 tRP................................. - 4 tRAS................................ - 12 Command Per Clock (CMD)............. - 2T tRRD................................ - Auto (5) tRC................................. - 23 tWR................................. - Auto (6) tWTR................................ - Auto (10) tREF................................ - Auto (7.8uS) [b]System Clocks[/b] CPU Multiplier...................... - 24x PCIe x16_1 (Mhz).................... - 125MHz PCIe x16_3 (Mhz).................... - Auto PCIe x16_2 (Mhz).................... - Auto PCIe x16_1 (Mhz).................... - Auto nForce SPP --> nForce MCP........... - 5 nForce SPP <-- nForce MCP........... - 5 [b]System Voltages[/b] CPU Core............................ - 1.450v CPU FSB............................. - 1.300v Memory.............................. - 2.200v nForce SPP.......................... - 1.250v nForce MCP.......................... - 1.500v HT nForce SPP <-> MCP............... - 1.250v ========== Orthos (dual-prime95), 2x CPU-Z, 3dMark2001SE: 3dMark2003: 3dMark2005: 3dMark2006: Aquamark 3d: Short description: 175x24 @ 4.2Ghz 4-4-4-12 @ ddr2-800 Share this post Link to post Share on other sites More sharing options...
Praz Posted March 6, 2007 Posted March 6, 2007 ABIT AB9 QuadGT LGA 775 Intel P965 Express ATX Intel Motherboard (LGA 775) Intel Core 2 Duo E6600 Conroe 2.4GHz (2400Mhz / 4M L2 core) Cell Shock 4-4-4-12 1000Mhz 2GB (2 x 1GB) DDR2 1000 (PC2 8000) CS2221440 Tuniq Tower 120 P4 & K8 CPU Cooler Thermalright HR-05 Copper Heatsink - North Bridge XFX PVT80FSHF9 GeForce 8800GTX 768MB, 97.92 drivers 684/1008 HITACHI SATA II 8MB cache 80GB hdd SAMSUNG 18X SATA DVD Burner With LightScribe SILVERSTONE ST85ZF ATX12V / EPS12V 850W SLI Certified Power Supply * * * * ========== [b]BIOS Settings:[/b] [color=red] CPU Operating Speed..................User Defined External Clock.......................400MHz Multiplier Factor....................x9 N/B Strap CPU As.....................PSB1066 DRAM Spec.(CPU:DRAM).................DDR2 677 (4:5) PCI Express Clock....................110MHz [/color] [b]Voltage Options Menu:[/b] [color=red] CPU Core Voltage.....................1.5650 DDR2 Voltage.........................2.30 CPU VTT 1.2V Voltage.................1.20 MCH 1.25V Voltage....................1.55 ICH 1.05V Voltage....................1.05 ICHIO 1.5V Voltage...................1.60 DDR2 Reference Voltage...............0% [/color] [b]Memory Timings Menu:[/b] [color=red] DRAM Timing Selectable...............Manual CAS Latency Time (tCL)...............4 RAS# to CAS# Delay (tRCD)............4 RAS# Precharge (tRP9)................4 Precharge Delay (tRAS)...............12 Command Rate.........................2T Refresh Cycle Time (tRFC)............22 [/color] ========== Orthos (SP2004) + 3dMark2001SE + 2x CPU-Z + Everest Ultimate Edition 2007: 3dMark2003: 3dMark2005: 3dMark2006: Aquamark 3d: ========== short description: 400x9 @ 3600mhz 1.5650vcore / 2.30vdimm 4.0-4-4-12 1000MHz Share this post Link to post Share on other sites More sharing options...
Malatory Posted March 7, 2007 Posted March 7, 2007 Evga 122-CK-NF68-AR Intel E6600 Kingston HyperX Dual Channel kit [2G] HKX9600D2K2/2G Nvidia 8800GTS (Evga) 2X 250gig Seagate drives. Pioneer 110B DVD burner Antec Trio's 650W PSU Set Ram voltage to 2.30V (stock) unlocked processor FSB and RAM FSB Set Ram to 1200Mhz Set Processor to 1334 3dmark03 3dmark06 3dmark05 SuperPi Orthos 8+ hours PCMark Score short Disscription: 333X9 5-5-5-15@1200 @ 2.3V Share this post Link to post Share on other sites More sharing options...
wevsspot Posted March 9, 2007 Posted March 9, 2007 DFI 975X/G Infinity, 11/15/2006 BIOS SuperTalent 2GB (2 x 1GB) DDR2-800 Intel Core 2 Duo E6600 Conroe 2.40GHz 4MB L2 Powercolor X1900XT - 7.1 Catalyst Drivers Western Digital Raptors 74GBX2 in RAID 0 Western Digital Cavier SE 80GB - Backup and storage LITE-ON DVDRW SOHW-1673S and LITE-ON CDRW LTR-52327S OCZ GameXStream OCZ700GXSSLI ATX12V 700W Power Supply Zalman 9700LED CPU Heatsink/Fan Zalman VF900 VGA Cooler ThermalRight HR-05 Northbridge Cooler Evercool VC-RE Southbridge Cooler * * ========== [b]Genie BIOS[/b] [color=red] Over Clock Mode Select.............. - Manual PPM Function........................ - Disabled CPU Clock Setting................... - 378Mhz PCIE Clock Setting.................. - 100MHz SATA Clock Sync. With............... - Fix 100Mhz CPU VID Offset Setting.............. - + 150.0mV Default CPU Voltage................. - 1.325v CPU VTT Voltage Setting............. - 1.30v DRAM Voltage Setting................ - 2.20v NB Chip Voltage Setting............. - 1.70v [/color] [b]DRAM Timing and Config[/b] [color=red] DRAM Timing Selectable.............. - Manual CAS Latency Time.................... - 4 DRAM RAS# to CAS# Delay............. - 4 DRAM RAS# Precharge................. - 3 Precharge Delay (tRAS).............. - 8 System Memory Frequency............. - 533Mhz Refresh Mode Select................. - 15.6uS Write to Precharge Delay............ - Auto Write to Read Delay (Same).......... - Auto Write to Read Delay (Diff).......... - Auto Read to Write Delay................. - Auto Write Recovery...................... - Auto Read Recovery....................... - Auto Read Delay.......................... - Auto Data A Drive Strength............... - 3 Data B Drive Strength............... - 3 x8 Control Drive Strength........... - 3 x16 Control Drive Strength.......... - 3 x8 Clock Drive Strength............. - 3 x16 Clock Drive Strength............ - 3 Command A Drive Strength............ - 1.5 Command B Drive Strength............ - 1.5 [/color] ========== Orthos (dual-prime95), 2x CPU-Z, 3dMark2001SE: 3dMark2003: 3dMark2005: 3dMark2006: Aquamark 3d: Short description: 378x9 @ 3.40Ghz (as set in BIOS) 4-4-3-8 Share this post Link to post Share on other sites More sharing options...
Chump Posted March 9, 2007 Posted March 9, 2007 DFI LANPARTY UT ICFX3200-T2R/G REV.A (BETA BIOS R6T_041) INTEL CORE 2 DUO E6600 CONROE 2.4GHZ 4M L2 CACHE BUFFALO FIRESTIX 2GB (2 x 1GB) PC2 6400 PN:FSX800D2C-K2G XFX 6800GT 256MB (OC 400 / 1150) ARCTIC COOLING NV SILENCER 5 (93.71 Drivers) MAXTOR SATA II 250GB HDD (7V250FO) SONY DUAL LAYER DVD RW (DRU-820A) OCZ GAMEXSTREEM 700W PSU NB & RAM COOLED BY 120MM FAN CPU COOLED BY TUNIC TOWER 120 [B]Genie BIOS Settings:[/B] [COLOR=red]CPU VID Control................ - 1.53750V[/COLOR] [COLOR=red]CPU VID Special Add............ - Auto[/COLOR] [COLOR=red]DDR2 RAM 1.8V Voltage.......... - 2.54V[/COLOR] [COLOR=red]CPU VTT 1.2V Voltage........... - 1.21V[/COLOR] [COLOR=red]NB Core 1.2V Voltage........... - 1.53V[/COLOR] [COLOR=red]NB PLL 1.8V Voltage............ - 2.03V[/COLOR] [COLOR=red]NB PLL 1.2V Voltage............ - 1.38V[/COLOR] [COLOR=red]NB PCI-E 1.2V Voltage.......... - 1.34V[/COLOR] [COLOR=red]NB Core 1.2V Convert From...... - 2.14V[/COLOR] [COLOR=red]SB Core 1.2V Voltage........... - 1.34V[/COLOR] [COLOR=red]Clockgen Voltage............... - 3.40V[/COLOR] [COLOR=red]GTL REF Voltage Control........ - Disable[/COLOR] [COLOR=red]CPU Core 1/2 GTL REF Volt...... - 48[/COLOR] [COLOR=red]CPU Core 3/4 GTL REF Volt...... - 48[/COLOR] [COLOR=red]North Bridge GTL REF Volt...... - 128[/COLOR] [COLOR=red]CPU PLL Setting Override....... - Enable[/COLOR] [COLOR=red]PLL Override Loop Count........ - Auto[/COLOR] [COLOR=red]Conroe P-State Multiplier...... - x 9[/COLOR] [COLOR=red]C1E Function................... - Auto[/COLOR] [B]Performance Options:[/B] [COLOR=red]Memory Clock Frequency......... - DDR-333[/COLOR] [COLOR=red]Current Memory Clock........... - 533[/COLOR] [COLOR=red]Control CPU Frequency.......... - Manual[/COLOR] [COLOR=red]CPU Frequency(MHz)............. - 412[/COLOR] [COLOR=red]NB FSB Strapping............... - 333[/COLOR] [COLOR=red]PCIE Overclock................. - 100[/COLOR] [COLOR=red]Software Reset Clockgen........ - Enable[/COLOR] [COLOR=red]Memory Overclocking............ - Enable[/COLOR] [COLOR=red]Overclocking Frequency(MHz).... - 499[/COLOR] [B]Northbridge Selections:[/B] [COLOR=red]Memory Channels................ - Auto[/COLOR] [COLOR=red]Memory Power Management........ - Disable[/COLOR] [COLOR=red]IGD Clock Gate................. - Disable[/COLOR] [COLOR=red]NB Channel Mapping............. - Auto[/COLOR] [COLOR=red]Simple Addr Translation........ - Disable[/COLOR] [COLOR=red]Chip-Select Swap............... - Disable[/COLOR] [COLOR=red]Burst Lenght................... - 8[/COLOR] [COLOR=red]Bank0 Map GFX.................. - 4[/COLOR] [COLOR=red]Bank1 Map GFX.................. - 5[/COLOR] [COLOR=red]Bank2 Map GFX.................. - 6[/COLOR] [COLOR=red]Channel Mapping NB............. - 5[/COLOR] [COLOR=red]Channel Mapping GFX............ - 1[/COLOR] [COLOR=red]Bank0 Map NB................... - 5[/COLOR] [COLOR=red]Bank1 Map NB................... - 11[/COLOR] [COLOR=red]Bank2 Map NB................... - 7[/COLOR] [B]Memory Timing Menu:[/B] [COLOR=red]CS Output Timing............... - Delay 1/4 Clock[/COLOR] [COLOR=red]CK Output Timing............... - Auto[/COLOR] [COLOR=red]Duel Channel Split Mode........ - Auto[/COLOR] [COLOR=red]Addr/CMD Driving Pre-Amp....... - Enable[/COLOR] [COLOR=red]Addr/CMD Driving Strength...... - 15[/COLOR] [COLOR=red]Clocking Driving Pre-Amp....... - Always[/COLOR] [COLOR=red]Clocking Driving Strength...... - 15 [/COLOR] [COLOR=red]Address/Command Timing......... - 2T[/COLOR] [COLOR=red]Memory Timing Select........... - Manual[/COLOR] [COLOR=red]CAS Timing (TCAS).............. - 4[/COLOR] [COLOR=red]Read RAS-CAS Delay (TRCDT)..... - 4[/COLOR] [COLOR=red]Write RAS-CAS Delay (TRCDR).... - 4[/COLOR] [COLOR=red]RAS Precharge Time TRP......... - 4[/COLOR] [COLOR=red]Cycle Time (TRAS).............. - 12[/COLOR] [COLOR=red]Row Cycle Time (TRC)........... - 28[/COLOR] [COLOR=red]Refresh To Active (TRFC)....... - 42[/COLOR] [COLOR=red]Bank To Bank CMD (TRRD)........ - 5[/COLOR] [COLOR=red]Write Recovery (TWR)........... - 6[/COLOR] [COLOR=red]Read-Write Command (TRTW)...... - 6[/COLOR] [COLOR=red]Write-Write CS (TRTR_CS)....... - 4[/COLOR] [COLOR=red]Write -Read Commad (TWTR)...... - 5[/COLOR] [COLOR=red]Write-Read CS (TWTR_CS)........ - 3[/COLOR] [COLOR=red]Read-Read CS (TRTR_CS)......... - 3[/COLOR] [COLOR=red]Read Data Transfer............. - 7[/COLOR] [B]Memory Timing Menu:[/B] [COLOR=red]Read Data Transfer............. - Enable[/COLOR] [COLOR=red]Read Strobe Delay.............. - Disable[/COLOR] [COLOR=red]Read Strobe Arrival............ - Enable[/COLOR] [B]FSB IO Strength:[/B] [COLOR=red]FSB IO Driving Control......... - Default[/COLOR] [COLOR=red]1X NMOS Strength............... - 10h[/COLOR] [COLOR=red]1X PMOS Strength............... - 10h[/COLOR] [COLOR=red]2X NMOS Strength............... - 10h[/COLOR] [COLOR=red]2X PMOS Strength............... - 10h[/COLOR] [COLOR=red]4X NMOS Strength............... - 10h[/COLOR] [COLOR=red]4X PMOS Strength............... - 10h[/COLOR] Orthos (SP2004) + 3dMark2001SE + 2x CPU-Z 3dMark2003: 3dMark2005: 3dMark2006: short description: 412 x 9 = 3.7GHZ @ 1.53750v 4-4-4-12 2T @ 2.54V DDR1000 Share this post Link to post Share on other sites More sharing options...
CPDMF Posted March 13, 2007 Posted March 13, 2007 DFI 975X/G Infinity, 12/01/06 BIOS G.Skill HX 2GB (2 x 1GB) DDR2-800 Intel Core 2 Duo E6400 Conroe 2.13GHz 2MB L2 EVGA 7950 GT 512MB@ 700/825, 93.71 drivers 2 X 80G Hitachi Sata2 RAID0 OCZ GameXStream 600W Power Supply Laing D4, MP05 Pro, BIX2, MCW60 * * * * ========== [b]Genie BIOS[/b] [color=red] PPM Function........................ - Enabled CPU Clock Setting................... - 400Mhz PCIE Clock Setting.................. - 100MHz SATA Clock Sync. With............... - Fix 100Mhz CPU VID Offset Setting.............. - + 025.0mV Default CPU Voltage................. - 1.3250v CPU VTT Voltage Setting............. - 1.30v DRAM Voltage Setting................ - 2.00v NB Chip Voltage Setting............. - 1.60v [/color] [b]DRAM Timing and Config[/b] [color=red] DRAM Timing Selectable.............. - Manual CAS Latency Time.................... - 4 DRAM RAS# to CAS# Delay............. - 4 DRAM RAS# Precharge................. - 3 Precharge Delay (tRAS).............. - 5 System Memory Frequency............. - 533Mhz Refresh Mode Select................. - 15.6 Write to Precharge Delay............ - 11 Write to Read Delay (Same).......... - 09 Write to Read Delay (Diff).......... - 01 Read to Write Delay................. - 01 Write Recovery...................... - 01 Read Recovery....................... - 00 Read Delay.......................... - 06 Data A Drive Strength............... - Auto Data B Drive Strength............... - Auto x8 Control Drive Strength........... - Auto x16 Control Drive Strength.......... - Auto x8 Clock Drive Strength............. - Auto x16 Clock Drive Strength............ - Auto Command A Drive Strength............ - Auto Command B Drive Strength............ - Auto [/color] ========== Orthos (dual-prime95), 2x CPU-Z, 3dMark2001SE: http://weboperative.com/coppermine/display...?album=52&pos=0 3dMark2003: 3dMark2005: 3dMark2006: Aquamark 3d: Short description: 400x8 @ 3.20Ghz 4-4-3-5 Share this post Link to post Share on other sites More sharing options...
sofarfrome Posted March 15, 2007 Posted March 15, 2007 DFI LANPARTY UT ICFX3200-T2R/G Crossfire (LGA 775)(Bios202) Intel Core 2 Duo E6600 Conroe 2.4GHz (2400Mhz / 4M L2 core)(L631B115) Crucial 10th Anniversary 2GB (2 x 1GB) DDR2 667 (PC2 5300) BFG 7950 GT OC 512MB, 93.81 drivers Western Digital Caviar SE SATA II 8MB cache 1600GB hdd NEC DVD-RW 20x DL Corsair HX620 psu ========== [b]Genie BIOS Settings:[/b] [color=red] CPU VID Control................ - 1.375 CPU VID Special Add............ - 105% DDR2 RAM 1.8V Voltage.......... - 2.20V CPU VTT 1.2V Voltage........... - 1.36V NB Core 1.2V Voltage........... - 1.48V NB PLL 1.8V Voltage............ - 1.93V NB PLL 1.2V Voltage............ - 1.29V NB PCI-E 1.2V Voltage.......... - 1.34V NB Core 1.2V Convert From...... - 1.97V SB Core 1.2V Voltage........... - 1.23V Clockgen Voltage............... - 3.40V GTL REF Voltage Control........ - Enable CPU Core 1/2 GTL REF Volt...... - 48 CPU Core 3/4 GTL REF Volt...... - 48 North Bridge GTL REF Volt...... - 128 CPU PLL Setting Override....... - Enable PLL Override Loop Count........ - Auto Conroe P-State Multiplier...... - 9x C1E Function................... - Disable [/color] [b]Performance Options:[/b] [color=red] Memory Clock Frequency......... - 533 Current Memory Clock........... - 533 Control CPU Frequency.......... - Manual CPU Frequency(MHz)............. - 401 NB FSB Strapping............... - 333 PCIE Overclock................. - 104 Software Reset Clockgen........ - Enable Memory Overclocking............ - Enable Overclocking Frequency(MHz).... - 502 [/color] [b]Northbridge Selections:[/b] [color=red] Memory Channels................ - A&b Memory Power Management........ - Disable IGD Clock Gate................. - Disable NB Channel Mapping............. - Auto Simple Addr Translation........ - Disable Chip-Select Swap............... - Disable Burst Lenght................... - 8 Bank0 Map GFX.................. - 4 Bank1 Map GFX.................. - 5 Bank2 Map GFX.................. - 6 Channel Mapping NB............. - 5 Channel Mapping GFX............ - 1 Bank0 Map NB................... - 5 Bank1 Map NB................... - 11 Bank2 Map NB................... - 7 [/color] [b]Memory Timing Menu:[/b] [color=red] CS Output Timing............... - 1/4 delay CK Output Timing............... - Auto Duel Channel Split Mode........ - Auto Addr/CMD Driving Pre-Amp....... - Enable Addr/CMD Driving Strength...... - 05 Clocking Driving Pre-Amp....... - Always Clocking Driving Strength...... - 05 Address/Command Timing......... - 2t Memory Timing Select........... - Manual CAS Timing (TCAS).............. - 4 Read RAS-CAS Delay (TRCDT)..... - 4 Write RAS-CAS Delay (TRCDR).... - 4 RAS Precharge Time TRP......... - 4 Cycle Time (TRAS).............. - 12 Row Cycle Time (TRC)........... - 22 Refresh To Active (TRFC)....... - 42 Bank To Bank CMD (TRRD)........ - 3 Write Recovery (TWR)........... - 6 Read-Write Command (TRTW)...... - 3 Write-Write CS (TRTR_CS)....... - 2 Write -Read Commad (TWTR)...... - 3 Write-Read CS (TWTR_CS)........ - 2 Read-Read CS (TRTR_CS)......... - 2 Read Data Transfer............. - 5 [/color] [b]Memory Timing Menu:[/b] [color=red] Read Data Transfer............. - Enable Read Strobe Delay.............. - Disable Read Strobe Arrival............ - Enable [/color] [b]FSB IO Strength:[/b] [color=red] FSB IO Driving Control......... - Manual 1X NMOS Strength............... - 10h 1X PMOS Strength............... - 10h 2X NMOS Strength............... - 10h 2X PMOS Strength............... - 10h 4X NMOS Strength............... - 10h 4X PMOS Strength............... - 10h [/color] ========== ========== short description: 401x9 @ 3609mhz 1.400vcore/2.20vdimm 4.0-4-4-12 Share this post Link to post Share on other sites More sharing options...
Likwid Posted March 17, 2007 Posted March 17, 2007 EVGA 122-CK-NF68-AR SLI P26 BIOS G.SKILL 2GB (2 x 1GB) DDR2-800 F2-6400PHU2-2GBHZ Intel Core 2 Duo E6700 Conroe 2.66GHz 4MB L2 EVGA 8800GTX 768MB 384-bit GDDR3 PCI-E 16x 97.92 drivers 2X Western Digital Raptor WD740ADFD 74GB 10000 RPM 16MB Cache ATA 150 LITE-ON 16x IDE DVD-RW OCZ Powerstream ATX12V 520W Power Supply Swiftech/Dangerden Watercooling * * * * ========== [b]FSB & Memory Config[/b] CPU Freq, Mhz....................... - 3600.0 CPU Multiplier...................... - 10x FSB - Memory Clock Mode............. - Unlinked FSB - Memory Ratio ................. - Auto FSB - QDR (Mhz)..................... - 1440 MEM (DDR), Mhz...................... - 900 [b]Memory Timing Setting[/b] Memopry Timing Setting.............. - Expert tCL (CAS Latency)................... - 4 tRCD................................ - 4 tRP................................. - 4 tRAS................................ - 12 Command Per Clock (CMD)............. - 2T tRRD................................ - Auto (3) tRC................................. - Auto (21) tWR................................. - Auto (6) tWTR................................ - Auto (8) tREF................................ - Auto (7.8uS) [b]System Clocks[/b] CPU Multiplier...................... - 10x PCIe x16_1 (Mhz).................... - 125MHz PCIe x16_3 (Mhz).................... - Auto PCIe x16_2 (Mhz).................... - Auto SPP <--> MCP ref clock.............. - 251MHz nForce SPP --> nForce MCP........... - 5 nForce SPP <-- nForce MCP........... - 5 [b]System Voltages[/b] CPU Core............................ - 1.5065v CPU FSB............................. - 1.3v Memory.............................. - 2.100v nForce SPP.......................... - 1.40v nForce MCP.......................... - 1.500v HT nForce SPP <-> MCP............... - 1.40v ========== Orthos (dual-prime95), 2x CPU-Z, 3dMark2001SE, Everest Read: 3dMark2003: 3dMark2005: 3dMark2006: Aquamark 3d: Short description: 360x10 @ 3.6Ghz 1.5065v DDR900 @ 4-4-4-12 2T 1.21v Share this post Link to post Share on other sites More sharing options...
sofarfrome Posted March 17, 2007 Posted March 17, 2007 DFI LANPARTY UT ICFX3200-T2R/G Crossfire (LGA 775) Intel Core 2 Duo E6600 Conroe 2.4GHz (2400Mhz / 4M L2 core) Crucial 10th Anniversary 2GB (2 x 1GB) DDR2 667 (PC2 5300) BFG 7950 GT OC 512MB, 93.81 drivers Western Digital Caviar SE SATA II 8MB cache 1600GB hdd NEC DVD-Rom 20x DL Corsair HX620 psu * * * * ========== [b]Genie BIOS Settings:[/b] [color=red] CPU VID Control................ - 1.375 CPU VID Special Add............ - 105% DDR2 RAM 1.8V Voltage.......... - 2.20V CPU VTT 1.2V Voltage........... - 1.36V NB Core 1.2V Voltage........... - 1.48V NB PLL 1.8V Voltage............ - 1.93V NB PLL 1.2V Voltage............ - 1.29V NB PCI-E 1.2V Voltage.......... - 1.34V NB Core 1.2V Convert From...... - 1.97V SB Core 1.2V Voltage........... - 1.23V Clockgen Voltage............... - 3.40V GTL REF Voltage Control........ - Enable CPU Core 1/2 GTL REF Volt...... - 48 CPU Core 3/4 GTL REF Volt...... - 48 North Bridge GTL REF Volt...... - 128 CPU PLL Setting Override....... - Enable PLL Override Loop Count........ - Auto Conroe P-State Multiplier...... - 9x C1E Function................... - Disable [/color] [b]Performance Options:[/b] [color=red] Memory Clock Frequency......... - 533 Current Memory Clock........... - 533 Control CPU Frequency.......... - Manual CPU Frequency(MHz)............. - 401 NB FSB Strapping............... - 333 PCIE Overclock................. - 104 Software Reset Clockgen........ - Enable Memory Overclocking............ - Enable Overclocking Frequency(MHz).... - 502 [/color] [b]Northbridge Selections:[/b] [color=red] Memory Channels................ - A&b Memory Power Management........ - Disable IGD Clock Gate................. - Disable NB Channel Mapping............. - Auto Simple Addr Translation........ - Disable Chip-Select Swap............... - Disable Burst Lenght................... - 8 Bank0 Map GFX.................. - 4 Bank1 Map GFX.................. - 5 Bank2 Map GFX.................. - 6 Channel Mapping NB............. - 5 Channel Mapping GFX............ - 1 Bank0 Map NB................... - 5 Bank1 Map NB................... - 11 Bank2 Map NB................... - 7 [/color] [b]Memory Timing Menu:[/b] [color=red] CS Output Timing............... - 1/4 delay CK Output Timing............... - Auto Duel Channel Split Mode........ - Auto Addr/CMD Driving Pre-Amp....... - Enable Addr/CMD Driving Strength...... - 05 Clocking Driving Pre-Amp....... - Always Clocking Driving Strength...... - 05 Address/Command Timing......... - 2t Memory Timing Select........... - Manual CAS Timing (TCAS).............. - 4 Read RAS-CAS Delay (TRCDT)..... - 4 Write RAS-CAS Delay (TRCDR).... - 4 RAS Precharge Time TRP......... - 4 Cycle Time (TRAS).............. - 12 Row Cycle Time (TRC)........... - 22 Refresh To Active (TRFC)....... - 42 Bank To Bank CMD (TRRD)........ - 3 Write Recovery (TWR)........... - 6 Read-Write Command (TRTW)...... - 3 Write-Write CS (TRTR_CS)....... - 2 Write -Read Commad (TWTR)...... - 3 Write-Read CS (TWTR_CS)........ - 2 Read-Read CS (TRTR_CS)......... - 2 Read Data Transfer............. - 5 [/color] [b]Memory Timing Menu:[/b] [color=red] Read Data Transfer............. - Enable Read Strobe Delay.............. - Disable Read Strobe Arrival............ - Enable [/color] [b]FSB IO Strength:[/b] [color=red] FSB IO Driving Control......... - Manual 1X NMOS Strength............... - 10h 1X PMOS Strength............... - 10h 2X NMOS Strength............... - 10h 2X PMOS Strength............... - 10h 4X NMOS Strength............... - 10h 4X PMOS Strength............... - 10h [/color] ========== Orthos (SP2004) + 3dMark2001SE + 2x CPU-Z + Everest Home Edition v2.20: http://img237.imageshack.us/my.php?image=36ghzorthosan4.jpg 3dMark2003: http://img401.imageshack.us/my.php?image=3...3dmark03ii8.jpg 3dMark2005: http://img401.imageshack.us/my.php?image=3...3dmark05yg2.jpg 3dMark2006: http://img401.imageshack.us/my.php?image=3...3dmark06ep6.jpg Aquamark 3d: http://img401.imageshack.us/my.php?image=3...quamark3uw3.jpg ========== short description: 401x9 @ 3609mhz 1.400vcore/2.20vdimm 4.0-4-4-12 Share this post Link to post Share on other sites More sharing options...
sofarfrome Posted March 19, 2007 Posted March 19, 2007 DFI LANPARTY UT ICFX3200-T2R/G Crossfire (LGA 775) Intel Core 2 Duo E6600 Conroe 2.4GHz (2400Mhz / 4M L2 core) Crucial 10th Anniversary 2GB (2 x 1GB) DDR2 667 (PC2 5300) [/b][/size][/color][/url] BFG 7950 GT OC 512MB, 93.81 drivers Western Digital Caviar SE SATA II 8MB cache 1600GB hdd NEC DVD-Rom 20x DL Corsair HX620 psu * * * * ========== [b]Genie BIOS Settings:[/b] [color=red] CPU VID Control................ - 1.375 CPU VID Special Add............ - 105% DDR2 RAM 1.8V Voltage.......... - 2.20V CPU VTT 1.2V Voltage........... - 1.36V NB Core 1.2V Voltage........... - 1.48V NB PLL 1.8V Voltage............ - 1.93V NB PLL 1.2V Voltage............ - 1.29V NB PCI-E 1.2V Voltage.......... - 1.34V NB Core 1.2V Convert From...... - 1.97V SB Core 1.2V Voltage........... - 1.23V Clockgen Voltage............... - 3.40V GTL REF Voltage Control........ - Enable CPU Core 1/2 GTL REF Volt...... - 48 CPU Core 3/4 GTL REF Volt...... - 48 North Bridge GTL REF Volt...... - 128 CPU PLL Setting Override....... - Enable PLL Override Loop Count........ - Auto Conroe P-State Multiplier...... - 9x C1E Function................... - Disable [/color] [b]Performance Options:[/b] [color=red] Memory Clock Frequency......... - 533 Current Memory Clock........... - 533 Control CPU Frequency.......... - Manual CPU Frequency(MHz)............. - 401 NB FSB Strapping............... - 333 PCIE Overclock................. - 104 Software Reset Clockgen........ - Enable Memory Overclocking............ - Enable Overclocking Frequency(MHz).... - 502 [/color] [b]Northbridge Selections:[/b] [color=red] Memory Channels................ - A&b Memory Power Management........ - Disable IGD Clock Gate................. - Disable NB Channel Mapping............. - Auto Simple Addr Translation........ - Disable Chip-Select Swap............... - Disable Burst Lenght................... - 8 Bank0 Map GFX.................. - 4 Bank1 Map GFX.................. - 5 Bank2 Map GFX.................. - 6 Channel Mapping NB............. - 5 Channel Mapping GFX............ - 1 Bank0 Map NB................... - 5 Bank1 Map NB................... - 11 Bank2 Map NB................... - 7 [/color] [b]Memory Timing Menu:[/b] [color=red] CS Output Timing............... - 1/4 delay CK Output Timing............... - Auto Duel Channel Split Mode........ - Auto Addr/CMD Driving Pre-Amp....... - Enable Addr/CMD Driving Strength...... - 05 Clocking Driving Pre-Amp....... - Always Clocking Driving Strength...... - 05 Address/Command Timing......... - 2t Memory Timing Select........... - Manual CAS Timing (TCAS).............. - 4 Read RAS-CAS Delay (TRCDT)..... - 4 Write RAS-CAS Delay (TRCDR).... - 4 RAS Precharge Time TRP......... - 4 Cycle Time (TRAS).............. - 12 Row Cycle Time (TRC)........... - 22 Refresh To Active (TRFC)....... - 42 Bank To Bank CMD (TRRD)........ - 3 Write Recovery (TWR)........... - 6 Read-Write Command (TRTW)...... - 3 Write-Write CS (TRTR_CS)....... - 2 Write -Read Commad (TWTR)...... - 3 Write-Read CS (TWTR_CS)........ - 2 Read-Read CS (TRTR_CS)......... - 2 Read Data Transfer............. - 5 [/color] [b]Memory Timing Menu:[/b] [color=red] Read Data Transfer............. - Enable Read Strobe Delay.............. - Disable Read Strobe Arrival............ - Enable [/color] [b]FSB IO Strength:[/b] [color=red] FSB IO Driving Control......... - Manual 1X NMOS Strength............... - 10h 1X PMOS Strength............... - 10h 2X NMOS Strength............... - 10h 2X PMOS Strength............... - 10h 4X NMOS Strength............... - 10h 4X PMOS Strength............... - 10h [/color] ========== Orthos (SP2004) + 3dMark2001SE + 2x CPU-Z + Everest Home Edition v2.20: 3dMark2003: 3dMark2005: 3dMark2006: Aquamark 3d: ========== short description: 401x9 @ 3609mhz 1.400vcore/2.20vdimm 4.0-4-4-12 Share this post Link to post Share on other sites More sharing options...
Chump Posted March 20, 2007 Posted March 20, 2007 DFI 975X/G INFINITY (BIOS 97TID213) INTEL CORE 2 DUO E4300 1.8GHZ 2MB L2 CACHE + TUNIQ TOWER 120 1GB PQI (2 x 512MB) DDR2-800 XFX GeForce 6800GT AC NV SILENCER 5 350/1000 93.71 DRIVERS 250GB MAXTOR MAX-LINE SATA-2 HDD (7V250FO) SONY DL DVD-RW DRU-820A OCZ GAMEXSTREEM 700W PSU ========== [B]Advanced BIOS Feature / CPU Feature[/B] [COLOR=red]Delay Prior To Thermal.............. - 16[/COLOR] [COLOR=red]Limit CPUID MaxVal.................. - Disabled[/COLOR] [COLOR=red]CIE Function........................ - Auto[/COLOR] [COLOR=red]Execute Disable Bit................. - Enabled[/COLOR] [COLOR=red]Virtualization Technology........... - Enabled[/COLOR] [COLOR=red]Frequency Unlimit................... - Disabled[/COLOR] [B]Genie BIOS[/B] [COLOR=red]DRAM Timing Config.................. - Manual[/COLOR] [COLOR=red]PPM Function........................ - Enabled[/COLOR] [COLOR=red]800MHZ Enhance Mode................. - Enabled[/COLOR] [B][COLOR=black]Ratio & Clock Setting[/COLOR][/B] [COLOR=red]Current CPU Speed................... - 3204Mhz[/COLOR] [COLOR=red]CPU Clock Ratio Setting............. - x 9[/COLOR] [COLOR=red]CPU Clock Setting................... - 356Mhz[/COLOR] [COLOR=red]Current DRAM Speed.................. - 892Mhz[/COLOR] [COLOR=red]System Memory Frequency............. - 667Mhz[/COLOR] [COLOR=red]PCIE Clock Setting.................. - 100MHz[/COLOR] [COLOR=red]SATA Clock Sync. With............... - Fix 100Mhz[/COLOR] [B][COLOR=black]Voltage Setting[/COLOR][/B] [COLOR=red]CPU VID Offset Setting...............- + 225mV[/COLOR] [COLOR=red]Default CPU Voltage................. - 1.325v[/COLOR] [COLOR=red]CPU VTT Voltage Setting............. - 1.30v[/COLOR] [COLOR=red]DRAM Voltage Setting................ - 2.00v[/COLOR] [COLOR=red]NB Chip Voltage Setting............. - 1.70v[/COLOR] [COLOR=black][B]Miscellaneous[/B][/COLOR] [COLOR=red]Auto Detect PCI Clock............... - Enabled[/COLOR] [COLOR=red]Spread Spectrum..................... - Disabled[/COLOR] [COLOR=red]Memory Hole Remapping............... - Enabled[/COLOR] [B]DRAM Timing and Config[/B] [COLOR=red]CAS Latency Time.................... - 5 [/COLOR] [COLOR=red]DRAM RAS# to CAS# Delay............. - 5[/COLOR] [COLOR=red]DRAM RAS# Precharge................. - 5[/COLOR] [COLOR=red]Precharge Delay (tRAS).............. - 15[/COLOR] [COLOR=red]Refresh Mode Select................. - 15.6[/COLOR] [COLOR=red]Write to Precharge Delay............ - Auto[/COLOR] [COLOR=red]Write to Read Delay (Same).......... - Auto[/COLOR] [COLOR=red]Write to Read Delay (Diff).......... - Auto[/COLOR] [COLOR=red]Read to Write Delay................. - Auto[/COLOR] [COLOR=red]Write Recovery...................... - Auto[/COLOR] [COLOR=red]Read Recovery....................... - Auto[/COLOR] [COLOR=red]Read Delay.......................... - 7[/COLOR] [COLOR=red]Data A Drive Strength............... - Auto[/COLOR] [COLOR=red]Data B Drive Strength............... - Auto[/COLOR] [COLOR=red]x8 Control Drive Strength........... - Auto[/COLOR] [COLOR=red]x16 Control Drive Strength.......... - Auto[/COLOR] [COLOR=red]x8 Clock Drive Strength............. - Auto[/COLOR] [COLOR=red]x16 Clock Drive Strength............ - Auto[/COLOR] [COLOR=red]Command A Drive Strength............ - Auto[/COLOR] [COLOR=red]Command B Drive Strength............ - Auto[/COLOR] [COLOR=red]DRAM Data Integrity Mode............ - NON-ECC[/COLOR] ========== Stress Prime 2004 Orthos Edition + 2x CPU-Z + 3dMark2001SE: 3dMark2003: 3dMark2005: 3dMark2006: Short description: DFI Infinity 975X/G E4300 @ 356 x 9 = 3204MHZ 1.300V + .225MV 2 X 512MB PQI DDR800 @ 5-5-5-15 2.00V Share this post Link to post Share on other sites More sharing options...
Kingfisher Posted March 28, 2007 Posted March 28, 2007 Asus P5B Deluxe (rev1.03) 1004 BIOS OCZ 2GB (2 x 1GB) DDR2-800 OCZ2P800R22GK Intel Core 2 Duo E6600 Conroe 2.4ghz. 4MB L2 EVGA 320-P2-N811-AR GeForce 8800GTS 97.92 fw drivers 650/1000 mhz. Hitachi T7K250 160GB x2 RAID 0 FSP Group 700w ** ** Code: AI Tuning:............................ Manual CPU Frequency............................... – 334 Dram Frequency............................... – 1002 PCI express frequency........................ – 101 PCI Clock Synchronation Mode................. - 33.33mhz Spread Spectrum............................. - Disabled Memory Voltage................................– 2.25v CPU VCore voltage............................ - 1.325v FSB Termination voltage...................... – 1.30v NB VCore..................................... – 1.20v SB Vcore..................................... - 1.50v ICH Chipset Voltage.......................... – 1.057v Modify Ratio support.......................... - Enabled Ratio CMOS Setting............................ – 9 C1E Support................................... – Disabled Max CPUID Value limit......................... – Disabled Vanderpool Technology......................... – Disabled CPU TM function............................... – Disabled Execute Disable bit........................... – Disabled PECI.......................................... – Disabled Memory Remap feature.......................... - Disabled Configure DRAM Timing by SPD.................. - Disabled DRAM CAS# Latenc.............................. - 5 DRAM RAS# to CAS# Delay....................... - 5 DRAM RAS# Precharge........................... - 5 DRAM RAS# Activate to Precharge............... - 15 DRAM Write Recovery Time...................... - 6 DRAM TRFC..................................... – 42 DRAM TRRD..................................... – 11 Rank Write to Read Delay...................... – 11 Read to Precharge Delay....................... - 11 Write to Precharge Delay...................... – 11 Static read control........................... – Auto Initiate graphic adapter...................... – PEG/PCI Orthos , 2x CPU-Z, 3dMark2001SE: http://img.photobucket.com/albums/v335/Gem...pg?t=1175099275 3dMark2003: 3dMark2005: http://img.photobucket.com/albums/v335/Gem...pg?t=1175099363 3dMark2006: http://img.photobucket.com/albums/v335/Gem...pg?t=1175099391 AquaMark3: Short description: 334x9(3.006Ghz.) @ stock voltage, 1.325v 5-5-5-15 @ 2.25v 1002 mhz. Share this post Link to post Share on other sites More sharing options...
Recommended Posts
Please sign in to comment
You will be able to leave a comment after signing in
Sign In Now