learners permit Posted January 29, 2006 Posted January 29, 2006 Failed prime in minutes but I dont care since I am not making an entry in the O/C database. Games and everything else workin very well and thats my aim. All in all a very impressive core the Newarks are and lotsa fun to tweak on. Off to batlle and have fun. Share this post Link to post Share on other sites More sharing options...
gadugger Posted January 29, 2006 Posted January 29, 2006 Failed prime in minutes but I dont care since I am not making an entry in the O/C database. Games and everything else workin very well and thats my aim. All in all a very impressive core the Newarks are and lotsa fun to tweak on. Off to batlle and have fun. Was that 32 pi with the 1 stick still in or back to your sig with divider ? And what timings ? Share this post Link to post Share on other sites More sharing options...
TheGeekMistress Posted January 29, 2006 Posted January 29, 2006 Don''t know if it is only the E5 controller but I have had some incredible results with my Twinmos BH5. 1 X 512 stable at 265 2 2 2 5. 1.5 2 2 4 stable at 250 with 3.5 volts. It may be the bios version as well. The 6/23 doesn't play well at all with either my TCCD or BH5. I have to run the 5/04 tictac modded bios. These boards were built with BH5 in mind.. i personally like running the TCCD so i can have the flexibility of running a high mem bus with looser timings or a low mem bus with 2-2-2-5-1T as my TCCD will do. TGM Share this post Link to post Share on other sites More sharing options...
TheGeekMistress Posted January 29, 2006 Posted January 29, 2006 oh sorry I thought you had a 4000. I am running 2-2-5-2 with all others being on auto. I had em all tweaked for my 3400 newcastle but thought I would start over. I can pass memtest at 250 X 12 but fail prime. are you on air? TGM Share this post Link to post Share on other sites More sharing options...
CPDMF Posted January 29, 2006 Posted January 29, 2006 @gadugger. If you haven't pulled a voltmod on that modstream I don't think you will be able to supply the voltage for BH5 to get over 225-230. Memtest is sometimes useless when trying to determine stability. I only use it to determine whether it is safe to boot into windows and run prime, OCCT, or whatever. Share this post Link to post Share on other sites More sharing options...
gadugger Posted January 29, 2006 Posted January 29, 2006 are you on air? TGM Yep air 9500 zalmann 48c load. Share this post Link to post Share on other sites More sharing options...
sailindawg Posted January 29, 2006 Posted January 29, 2006 that would make my 1x1gig stick choice useless since even at 200mhz a 1x1gig stick will only run at 2.5-4-3-8 1T. Depends on the RAM TGM. My 2x1024 Infineon CE6 RAM will run from 200-220 fsb at 2.0, 3, 2, 5 1T timings. Right now I have them running 2.0, 3, 2, 7 1T. The problem I run into with the Clawhammer is the mem controller. I can't get 1:1 with a 250 fsb, regardless of timings. The Claw's mem controller doesn't seem to like 2x1024 at high memory fsb. The mem controller seems to like the 166 divider. But with some of the pc4000 RAM around now, a 1gig stick doesn't necessarily mean very loose timings. Share this post Link to post Share on other sites More sharing options...
gadugger Posted January 29, 2006 Posted January 29, 2006 @gadugger. If you haven't pulled a voltmod on that modstream I don't think you will be able to supply the voltage for BH5 to get over 225-230. Memtest is sometimes useless when trying to determine stability. I only use it to determine whether it is safe to boot into windows and run prime, OCCT, or whatever. No idea how to do it. Havn't researched that one yet. It will go to 3.6 in the bios. Share this post Link to post Share on other sites More sharing options...
TheGeekMistress Posted January 29, 2006 Posted January 29, 2006 No idea how to do it. Havn't researched that one yet. It will go to 3.6 in the bios. rmemebr that high mem voltage and a low vcore will more than likely kill your cpu. you must not exceed the defualt vcore and defualt vmem gap. so if your vcore is 1.35 and the mem is 2.5 the diference would be 1.15volts between core and mem voltage. in need be, just bump the vcore up by .5volts. TGM EDIT: just remembered about AMD's QnC feature. that places your cvore down to 1.1volts. so take 1.1vcore from 2.5vmem and don't exceed the diference of 1.4volts between the core and mem voltage. Share this post Link to post Share on other sites More sharing options...
CPDMF Posted January 29, 2006 Posted January 29, 2006 No idea how to do it. Havn't researched that one yet. It will go to 3.6 in the bios. The actually memory voltage will be .15 to .20 lower than the 3..3 rail of the PSU no matter what you set it at in the bios. Meaning if your 3.3 rail measures 3.3 you will never see voltages higher than 3.15 at the memory. If you need to voltmod the PSU shoot me a PM and I can tell how to do it, takes about 15 minutes and 4 bucks worth of parts. Share this post Link to post Share on other sites More sharing options...
TheGeekMistress Posted January 29, 2006 Posted January 29, 2006 I had TCCD before and my performance with BH5 on the NF3 is way better (at least from a OCer point of view). Of course you need to deliver more juice than the mobo will do from stock but I had an OCZ powerstream so everything worked great and I am much happier at ~252FSB @ 2-2-2-5 than I was with my TCCD specially since running my CPU with 2 sticks limited my FSB to about 262 compared to 300 with only 1 stick, so BH5 was a no brainer choice. Perhaps the new 754 CPU has a better mem controller than my old 3400 NC and will allow for higher FSB from TCCD but still I rather take BH tight timings any day. Regards i hear ya, i have 2x256 Mushkin BLack PCB BH5's and those things could tweak tight. on my nf2 i could run prime stable at 255 2.0-2-2-2-10(or 5)-10-16-4-4-6-3-3-3-5-1T w/3.3v but, i want a gig of ram and the TCCD's are my best chioce. also, the mem controller is more robuston the E4/E5 rev. people have been telling me they could reach 290mhz with the same ram i have with an E4 chip. i don't know how my TCCD's will run on my new nf3 mobo for sure yet, but on my UI nf2 it ran 2.0-2-2-2-5-9-10-1-1-3-3-2-1-3-1T at 235mhz with 2.8vmem TGM Share this post Link to post Share on other sites More sharing options...
gadugger Posted January 29, 2006 Posted January 29, 2006 The actually memory voltage will be .15 to .20 lower than the 3..3 rail of the PSU no matter what you set it at in the bios. Meaning if your 3.3 rail measures 3.3 you will never see voltages higher than 3.15 at the memory. If you need to voltmod the PSU shoot me a PM and I can tell how to do it, takes about 15 minutes and 4 bucks worth of parts. Are you saying that even with my ocz booster that I am only getting 3.15 ? Share this post Link to post Share on other sites More sharing options...
Recommended Posts
Please sign in to comment
You will be able to leave a comment after signing in
Sign In Now