anthony Posted April 30, 2008 Posted April 30, 2008 This isn't much of a work log, just pictures of significant stepping stones . While most of the resistores and stuff are on the way, I have started putting together the 'control pannel', there isn't too much to see now, but progress will come! Id actually be a lot further down the road of I didn't cheap out- I need a really small square screw driver to attach the resistors to the heatsink Anyways, here is what I have so far: Forgive me for not adhering to standard coloring... two of the black binding posts are actually for the 5.5V and 3.3V rail, not ground, the other two are. The six reds are for the 12V. (measuring) The 24 holes underneath are for switches that are to be mounted. edit: Oh to clarify, the metal sheet, is one of many from a shelf. Out with portability, this thing is going to be a piece of furniture as well. Share this post Link to post Share on other sites More sharing options...
jammin Posted April 30, 2008 Posted April 30, 2008 Would you care to elaborate on the schematics for this (I would assume you drew them up before commencing building) and what functionality you are aiming for from it? I'll be interested to see how this progresses. Share this post Link to post Share on other sites More sharing options...
anthony Posted April 30, 2008 Posted April 30, 2008 See im not much of a planner, never drew any 'real schematics' only scribbles Functionality, its a load tester Itll be a bit more elaborate, and aesthetically pleasing than just a scrap of metal, but ill wait for the basics to take form first. This is going to be more of a process, up front, to do everything I want would cost too much, so this- I guess first version will just be the bare basics: an enormous load. Eventually, itll be a bit more elaborate such as a heat comparment to heat up units being tested, indiv amp meters for the rails and so on. Share this post Link to post Share on other sites More sharing options...
road-runner Posted April 30, 2008 Posted April 30, 2008 Ok Share this post Link to post Share on other sites More sharing options...
hardnrg Posted April 30, 2008 Posted April 30, 2008 what will be your criteria for whether or not a PSU can support a given load? are you going to look at transients/ripple? Share this post Link to post Share on other sites More sharing options...
anthony Posted April 30, 2008 Posted April 30, 2008 Eventually, baby steps here! This part is going to cost around $500, so ittll be a little while before I can get a scope Share this post Link to post Share on other sites More sharing options...
anthony Posted May 1, 2008 Posted May 1, 2008 Finished up the drilling, and got the proper screw driver to attach the resistors for the 5V load Share this post Link to post Share on other sites More sharing options...
airman Posted May 1, 2008 Posted May 1, 2008 looks good - i'm excited to see where this goes. that'd be the perfect way to review psus Share this post Link to post Share on other sites More sharing options...
Waco Posted May 1, 2008 Posted May 1, 2008 looks good - i'm excited to see where this goes. that'd be the perfect way to review psus I agree - much better than throwing it in a rig and going "yep, it works!" Roadkill - what amperage are you looking at pulling from each rail? I would think 2 amp increments past something like 10 amps would be pretty good for load-testing. Share this post Link to post Share on other sites More sharing options...
Verran Posted May 1, 2008 Posted May 1, 2008 This is a VERY cool project. You had mentioned this quite a while ago and I'm glad it's still "on the burner". I'm interested to see if a proper load can "separate the men from the boys" so to speak. If not, it'll be time for one of those PC-based o-scope setups maybe Anyone have an idea of the cost of those these days? Share this post Link to post Share on other sites More sharing options...
Waco Posted May 1, 2008 Posted May 1, 2008 If not, it'll be time for one of those PC-based o-scope setups maybe Anyone have an idea of the cost of those these days? Just about any oscilloscope is expensive. Actually - integrating a standalone o-scope into that front panel to monitor voltages wouldn't be a bad idea. If you're really hammering on the PSU the DC conversion is bound to get pretty dirty. Share this post Link to post Share on other sites More sharing options...
jammin Posted May 1, 2008 Posted May 1, 2008 Downfalls of several testing methods, plus some suggestions for DIY setups are discussed Here. Any test set up, even one you build yourself requires some investment in equipment. Currently, the setup they use over at HardOCP provides a pretty good guide to what is required to put a PSU through it's paces. Their living document goes into a decent amount of detail and is a good starting point for anyone looking to put together something similar. Share this post Link to post Share on other sites More sharing options...
Recommended Posts
Please sign in to comment
You will be able to leave a comment after signing in
Sign In Now