road-runner Posted January 11, 2010 Posted January 11, 2010 road runner... is my northbridge temp about right? or to high? I dont see them? I dont ever look at my chipset temps anyway I just throw a 120mm fan blowing on it... Share this post Link to post Share on other sites More sharing options...
unknownuser200 Posted January 11, 2010 Posted January 11, 2010 (edited) opps wow my bad.. i ment northbridge voltage Edited January 11, 2010 by unknownuser200 Share this post Link to post Share on other sites More sharing options...
road-runner Posted January 11, 2010 Posted January 11, 2010 opps wow my bad.. i ment northbridge voltage I dont know, usually you dont need much of an increase or I didnt until you get on up there around 450 FSB or more on P35 and 500 on P45, even then I never needed much just a couple increments. Off course I always take the heatsinks off and clean off the old thermal compound, put good stuff on make sure its making good contact and all then throw a fan on it... Share this post Link to post Share on other sites More sharing options...
Zertz Posted January 11, 2010 Posted January 11, 2010 You sure ICH is southbridge? If it is I have been doing it wrong for a long time, I thought it was the northbridge... ICH = I/O Controller Hub = Southbridge MCH = Memory Controller Hub = Northbridge Share this post Link to post Share on other sites More sharing options...
MJCRO Posted January 11, 2010 Posted January 11, 2010 I dont know, usually you dont need much of an increase or I didnt until you get on up there around 450 FSB or more on P35 and 500 on P45, even then I never needed much just a couple increments. Off course I always take the heatsinks off and clean off the old thermal compound, put good stuff on make sure its making good contact and all then throw a fan on it... +1 on that, you just gave me new project to start... Share this post Link to post Share on other sites More sharing options...
road-runner Posted January 11, 2010 Posted January 11, 2010 ICH = I/O Controller Hub = SouthbridgeMCH = Memory Controller Hub = Northbridge Yea thats the one MCH, dont know why I was thinking ICH. Bad week to stop smoking, I am going to bed... Share this post Link to post Share on other sites More sharing options...
MJCRO Posted January 11, 2010 Posted January 11, 2010 Yea thats the one MCH, dont know why I was thinking ICH. Bad week to stop smoking, I am going to bed... LOL, good luck RR. Share this post Link to post Share on other sites More sharing options...
unknownuser200 Posted January 11, 2010 Posted January 11, 2010 new project? lowest fully stable NB voltage was 1.37 finnally done overclocking for tonight... Share this post Link to post Share on other sites More sharing options...
IVIYTH0S Posted January 11, 2010 Posted January 11, 2010 make sure you're running prime95 on smallFFT's for the maximum CPU stress. Blend and Large don't push it as hard. Share this post Link to post Share on other sites More sharing options...
unknownuser200 Posted January 11, 2010 Posted January 11, 2010 ran it that way... same temps... no reasons to suspect failure Share this post Link to post Share on other sites More sharing options...
IVIYTH0S Posted January 11, 2010 Posted January 11, 2010 did you enable round off checking?? want me to take some shots of my bios?? (even though some of my CPU voltage might make people lol) Share this post Link to post Share on other sites More sharing options...
unknownuser200 Posted January 11, 2010 Posted January 11, 2010 if you want go for it Share this post Link to post Share on other sites More sharing options...
Recommended Posts
Please sign in to comment
You will be able to leave a comment after signing in
Sign In Now