Uber-Noober Posted March 31, 2007 Posted March 31, 2007 Gigabyte GA-965P-DS3 Rev3.3, F10 BIOS OCZ 2GB (2 x 1GB) DDR2-800 Platinum Rev. 2 Intel Core 2 Duo E4300 Allendale 1.8GHz 2MB L2 eVGA 7900GTO 512MB 256-bit GDDR3 PCI-E 16x 93.71 drivers 670 / 1350 2 x Western Digital Caviar SE16 WD2500KS 250GB 7200 RPM 16MB Cache SATA 3.0Gb/s RAID 0 LITE-ON Black 20X DVD+R SATA CORSAIR CMPSU-620HX ATX12V v2.2 and EPS12V 2.91 620W Power Supply Thermalright Ultra-120 CPU Cooling Heatsink ========== [b]MB Intelligent Tweaker (M.I.T.)[/b] [color=green] Robust Graphics Booster............. - Auto CPU Clock Ratio..................... - 9x CPU Host Clock Control.............. - Enabled CPU Host Frequency (Mhz)............ - 370 PCI Express Frequency (Mhz)......... - Auto C.I.A.2............................. - Disabled System Memory Multiplier (SPD)...... - 2.5 Memory Frequency (Mhz).............. - 925 High Speed DRAM DLL Settings........ - Option 1 DRAM Timing Selectable (SPD)........ - Auto CAS Latency Time.................... - Auto DRAM RAS# to CAS# Delay............. - Auto DRAM RAS# Precharge................. - Auto Precharge Delay (tRAS).............. - Auto ACT to ACT Delay (tRRD)............. - Auto Bank Write to READ Delay............ - Auto Write to Precharch Delay............ - Auto Refresh to ACT Delay................ - 0 (Auto) Read to Precharge Delay............. - Auto Memory Performance Enhance.......... - Normal System Voltage Control.............. - Manual DDR2 OverVoltage Control............ - +0.3v PCI-E OverVoltage Control........... - Normal FSB OverVoltage Control............. - +0.1v (G)MCH OverVoltage Control.......... - +0.1v CPU Voltage Control................. - 1.4250v Normal CPU Vcore.................... - 1.3250v [/color] ========== Orthos (dual-prime95), 2x CPU-Z, 3dMark2001SE: http://img513.imageshack.us/my.php?image=s...icial800lo9.jpg 3dMark2003: http://img142.imageshack.us/my.php?image=3...gcroppedgm6.jpg 3dMark2005: http://img142.imageshack.us/my.php?image=3...gcroppedma0.jpg 3dMark2006: http://img381.imageshack.us/my.php?image=3...gcroppedot1.jpg Aquamark 3d: http://img443.imageshack.us/my.php?image=a...officialpo8.jpg Short description: 370x9 @ 3.33Ghz 1.425v 5-5-5-15 @ 2.1v Share this post Link to post Share on other sites More sharing options...
tasr Posted April 1, 2007 Posted April 1, 2007 DFI LanParty UT ICFX3200-T2R/G Crossfire (LGA 775), BIOS 12/22/2006 Intel Core 2 Duo E4300 Allendale 1.8GHz (1800Mhz / 2M L2 core) G.SKILL 2GB (2 x 1GB) 240-Pin DDR2 SDRAM DDR2-800 (PC2 6400) F2-6400PHU2-2GBHZ ATI 100-437509 Radeon X1600PRO 512MB 128-bit GDDR2 PCI-e x16 Western Digital Raptor WD36GB 10,000 RPM 16MB Cache SATA150 HDD Lite-On Black 16X DVD-ROM 52X CD-R 32X CD-RW 52X CD-ROM 1.5MB Cache SATA Combo Drive Corsair CMPSU-620HX 620W PSU Cooler Master Gemin II Cooler w/X2 120mm Fans North Bridge Cooler, Thermalright HR-05-SLI Copper Heatsinks * * * * ========== [b]Genie BIOS Settings:[/b] [color=red] CPU VID Control................ - 1.3875v CPU VID Special Add............ - Auto DDR2 RAM 1.8V Voltage.......... - 2.00V CPU VTT 1.2V Voltage........... - 1.41V NB Core 1.2V Voltage........... - 1.82V NB PLL 1.8V Voltage............ - 1.93V NB PLL 1.2V Voltage............ - 1.38V NB PCI-E 1.2V Voltage.......... - 1.34V NB Core 1.2V Convert From...... - 1.81V SB Core 1.2V Voltage........... - 1.34V Clockgen Voltage............... - 3.40V GTL REF Voltage Control........ - Disable CPU Core 1/2 GTL REF Volt...... - N/A CPU Core 3/4 GTL REF Volt...... - N/A North Bridge GTL REF Volt...... - 128 CPU PLL Setting Override....... - Enabled PLL Override Loop Count........ - Auto Conroe P-State Multiplier...... - x9 C1E Function................... - Disabled [/color] [b]Performance Options:[/b] [color=red] Memory Clock Frequency......... - DDR-533 Current Memory Clock........... - 533MHz Control CPU Frequency.......... - Manual CPU Frequency(MHz)............. - 345 NB FSB Strapping............... - 300 PCIE Overclock................. - 100 Software Reset Clockgen........ - Enabled Memory Overclocking............ - Enabled Overclocking Frequency(MHz).... - 460 [/color] [b]Northbridge Selections:[/b] [color=red] Memory Channels................ - Channel A and B Memory Power Management........ - Disabled IGD Clock Gate................. - Disable NB Channel Mapping............. - Auto Simple Addr Translation........ - Disable Chip-Select Swap............... - Disable Burst Lenght................... - 8 Bank0 Map GFX.................. - 4 Bank1 Map GFX.................. - 5 Bank2 Map GFX.................. - 6 Channel Mapping NB............. - 5 Channel Mapping GFX............ - 1 Bank0 Map NB................... - 5 Bank1 Map NB................... - 11 Bank2 Map NB................... - 7 [/color] [b]Memory Timing Menu:[/b] [color=red] CS Output Timing............... - Delay 1/4 Clock CK Output Timing............... - Auto Duel Channel Split Mode........ - Auto Addr/CMD Driving Pre-Amp....... - Enabled Addr/CMD Driving Strength...... - 06 Clocking Driving Pre-Amp....... - Always Clocking Driving Strength...... - 06 Address/Command Timing......... - Auto Memory Timing Select........... - Manual CAS Timing (TCAS).............. - 5 Read RAS-CAS Delay (TRCDT)..... - 7 Write RAS-CAS Delay (TRCDR).... - 7 RAS Precharge Time TRP......... - 7 Cycle Time (TRAS).............. - 21 Row Cycle Time (TRC)........... - 26 Refresh To Active (TRFC)....... - 43 Bank To Bank CMD (TRRD)........ - 4 Write Recovery (TWR)........... - 9 Read-Write Command (TRTW)...... - 3 Write-Write CS (TRTR_CS)....... - 2 Write -Read Commad (TWTR)...... - 6 Write-Read CS (TWTR_CS)........ - 2 Read-Read CS (TRTR_CS)......... - 2 Read Data Transfer............. - 5 [/color] [b]Memory Timing Menu:[/b] [color=red] Read Data Transfer............. - Enable Read Strobe Delay.............. - Disable Read Strobe Arrival............ - Enable [/color] [b]FSB IO Strength:[/b] [color=red] FSB IO Driving Control......... - Manual 1X NMOS Strength............... - 10h 1X PMOS Strength............... - 10h 2X NMOS Strength............... - 10h 2X PMOS Strength............... - 10h 4X NMOS Strength............... - 10h 4X PMOS Strength............... - 10h [/color] ========== Orthos (SP2004) + 3dMark2001SE + 3x CPU-Z + Everest Ultimate: 3dMark2003: 3dMark2005: 3dMark2006: ========== short description: 345x9 @ 3100MHz 1.3875vCore / 2.00vDimm 5-7-7-21 Share this post Link to post Share on other sites More sharing options...
THunDA Posted April 2, 2007 Posted April 2, 2007 DFI 975X/G Infinity, 2/27/07 BIOS OCZ 2GB (2 x 1GB) DDR2-800 (ATI CrossFire Certified) Intel Core 2 Duo E4300 1.8GHz Power Color x1900xtx @ 675-783 with 7.1 drivers 160gig Seagate Sata Drive NEC 3550A DVD-RW drive PcPower & Cooling SILENCER 610 PSU Danger Den Water Cooling = TDX+Maze4+BIX2+DDC-12v+38 tubing * * * * ========== [b]Genie BIOS[/b] [color=red] FSB 800mhz CPU enhanced mode.............. - Enabed PPM Function........................ - Enabled CPU Clock Setting................... - 356Mhz System Memory Frequency............. - 667Mhz PCIE Clock Setting.................. - 110MHz SATA Clock Sync. With............... - Fix 100Mhz CPU VID Offset Setting.............. - +137.5mv Default CPU Voltage................. - 1.32500v CPU VTT Voltage Setting............. - 1.30v DRAM Voltage Setting................ - 2.20v NB Chip Voltage Setting............. - 1.70v [/color] [b]DRAM Timing and Config[/b] [color=red] DRAM Timing Selectable.............. - Manual CAS Latency Time.................... - 5 DRAM RAS# to CAS# Delay............. - 5 DRAM RAS# Precharge................. - 5 Precharge Delay (tRAS).............. - 15 Refresh Mode Select................. - Auto Write to Precharge Delay............ - Auto Write to Read Delay (Same).......... - Auto Write to Read Delay (Diff).......... - Auto Read to Write Delay................. - Auto Write Recovery...................... - Auto Read Recovery....................... - Auto Read Delay.......................... - Auto Data A Drive Strength............... - Auto Data B Drive Strength............... - Auto x8 Control Drive Strength........... - Auto x16 Control Drive Strength.......... - Auto x8 Clock Drive Strength............. - Auto x16 Clock Drive Strength............ - Auto Command A Drive Strength............ - Auto Command B Drive Strength............ - Auto [/color] ========== Orthos (dual-prime95), CPU-Z, 3dMark2001SE: http://diy-street.com/upload/thunda/3200mhzC2D/3dmark01.JPG 3dMark2003: http://diy-street.com/upload/thunda/3200mhzC2D/3dmark03.JPG 3dMark2005: http://diy-street.com/upload/thunda/3200mhzC2D/3dmark05.JPG 3dMark2006: http://diy-street.com/upload/thunda/3200mhzC2D/3dmark06.JPG Aquamark 3d: http://diy-street.com/upload/thunda/3200mhzC2D/aq3.JPG Short description: 356x9 @ 3204mhz 5-5-5-15 Share this post Link to post Share on other sites More sharing options...
SpeedDemon Posted April 5, 2007 Posted April 5, 2007 DFI INFINITY 975 x/g [12/01/06 BIOS] Corsair XMS2 2 gig (1Gig X 2) DDR800 PC6400 [Duel channel] Intel Core 2 Duo E6300 [batch: L629B041] (1.86 Ghz) OCZ GameXStream 600W PSU EVGA 8800 GTS 640MB pci-e (flashed with superclock bios) Western Digital 200gb Caviar SATA 7200RPM HDD Swiftech HP-120 Prem Watercooling kit (swapped: res and pump top) Swiftech Micro Res DDC Delrin pump top // [B]Genie Bios:[/B] [SIZE="2"]PPM function......................Disabled CPU clock..........................429MHz PCIE Clock.........................105MHz SATA Clock........................Fix 100MHz CPU VID............................+ 125.0mV Default VID........................1.32500V CPU VTT............................1.30V DRAM Voltage......................2.00 NB Voltage..........................1.70V Auto Detect PCI...................Enabled Spread Spectrum..................Disabled Memory Hole Remap..............Enabeld[/SIZE] [B]DRAM timing and Config:[/B] [SIZE="2"]DRAM timing Select..............Manual CAS Latency.......................5 DRAM RAS# to CAS# Delay....5 DRAM RAS# Precharge..........5 Precharge Delay (tRAS).........12 System Memory Freq............400 Refreash Mose Select...........7.8 us Data A Drive Strength...........3.00X Data B Drive Strength............3.00X x8 Control Drive Strength.......3.00X x16 Control Drive Strength......3.00X x8 Clock Drive Strength...........3.00X x16 Clock Drive Strength..........3.00X Command A Drive Strength.......3.00X Command B Drive Strength........3.00X[/SIZE] 3dmark05 (pro) 3dmark03(free) 3dmark06(free) Orthos 2CPUz 3dmark01se: E6300 on DFI975x/g (12/01/06) 429X7 = 3003Mhz 5-5-5-12 Share this post Link to post Share on other sites More sharing options...
Chump Posted April 5, 2007 Posted April 5, 2007 DFI INFINITY 975X/G REVISION B (97TID227 BIOS) INTEL CORE 2 DUO E6600 CONROE 2.4GHZ 4MB L2 CACHE + TUNIQ TOWER 120 2GB BUFFALO FIRESTIX (2 x 1GB) PC2-6400 INNO3D 8800GTS 320MB OC: 595/1880 97.92 DRIVERS 250GB MAXTOR MAX-LINE SATA-2 HDD (7V250FO) SONY DL DVD-RW DRU-820A OCZ GAMEXSTREEM 700W PSU ========== [B]Advanced BIOS Feature / CPU Feature[/B] [COLOR=red]Delay Prior To Thermal.............. - 16[/COLOR] [COLOR=red]Limit CPUID MaxVal.................. - Disabled[/COLOR] [COLOR=red]CIE Function........................ - Auto[/COLOR] [COLOR=red]Execute Disable Bit................. - Enabled[/COLOR] [COLOR=red]Virtualization Technology........... - Enabled[/COLOR] [COLOR=red]Frequency Unlimit................... - Disabled[/COLOR] [B]Genie BIOS[/B] [COLOR=red]DRAM Timing Config.................. - Manual[/COLOR] [COLOR=red]PPM Function........................ - Enabled[/COLOR] [B][COLOR=black]Ratio & Clock Setting[/COLOR][/B] [COLOR=red]Current CPU Speed................... - 3699Mhz[/COLOR] [COLOR=red]CPU Clock Ratio Setting............. - x 9[/COLOR] [COLOR=red]CPU Clock Setting................... - 411Mhz[/COLOR] [COLOR=red]Current DRAM Speed.................. - 822Mhz[/COLOR] [COLOR=red]System Memory Frequency............. - 533Mhz[/COLOR] [COLOR=red]PCIE Clock Setting.................. - 100MHz[/COLOR] [COLOR=red]SATA Clock Sync. With............... - Fix 100Mhz[/COLOR] [B][COLOR=black]Voltage Setting[/COLOR][/B] [COLOR=red]CPU VID Offset Setting...............- + 237.0mV[/COLOR] [COLOR=red]Default CPU Voltage................. - 1.300v[/COLOR] [COLOR=red]CPU VTT Voltage Setting............. - 1.30v[/COLOR] [COLOR=red]DRAM Voltage Setting................ - 2.20v[/COLOR] [COLOR=red]NB Chip Voltage Setting............. - 1.70v[/COLOR] [COLOR=black][B]Miscellaneous[/B][/COLOR] [COLOR=red]Auto Detect PCI Clock............... - Enabled[/COLOR] [COLOR=red]Spread Spectrum..................... - Disabled[/COLOR] [COLOR=red]Memory Hole Remapping............... - Enabled[/COLOR] [B]DRAM Timing and Config[/B] [COLOR=red]CAS Latency Time.................... - 4 [/COLOR] [COLOR=red]DRAM RAS# to CAS# Delay............. - 4[/COLOR] [COLOR=red]DRAM RAS# Precharge................. - 4[/COLOR] [COLOR=red]Precharge Delay (tRAS).............. - 12[/COLOR] [COLOR=red]Refresh Mode Select................. - 15.6[/COLOR] [COLOR=red]Write to Precharge Delay............ - Auto[/COLOR] [COLOR=red]Write to Read Delay (Same).......... - Auto[/COLOR] [COLOR=red]Write to Read Delay (Diff).......... - Auto[/COLOR] [COLOR=red]Read to Write Delay................. - Auto[/COLOR] [COLOR=red]Write Recovery...................... - Auto[/COLOR] [COLOR=red]Read Recovery....................... - Auto[/COLOR] [COLOR=red]Read Delay.......................... - 6[/COLOR] [COLOR=red]Data A Drive Strength............... - Auto[/COLOR] [COLOR=red]Data B Drive Strength............... - Auto[/COLOR] [COLOR=red]x8 Control Drive Strength........... - Auto[/COLOR] [COLOR=red]x16 Control Drive Strength.......... - Auto[/COLOR] [COLOR=red]x8 Clock Drive Strength............. - Auto[/COLOR] [COLOR=red]x16 Clock Drive Strength............ - Auto[/COLOR] [COLOR=red]Command A Drive Strength............ - Auto[/COLOR] [COLOR=red]Command B Drive Strength............ - Auto[/COLOR] [COLOR=red]DRAM Data Integrity Mode............ - NON-ECC[/COLOR] ========== Stress Prime 2004 Orthos Edition + 2x CPU-Z + 3dMark2001SE: 3dMark2003: 3dMark2005: 3dMark2006: Short description: DFI Infinity 975X/G REV B E6600 @ 411 x 9 = 3708MHZ 1.300V + .237MV 2 X 1GB BUFFALO FIRESTIX PC2-6400 @ 4-4-4-12 2.20V Share this post Link to post Share on other sites More sharing options...
likewhoa Posted April 7, 2007 Posted April 7, 2007 DFI INFINITY 975 x/g [12/01/06 BIOS] Intel Core 2 Duo X6800 [batch: L632A430] (2.93 Ghz) Mushkin Redline PC2-8000 4-5-4-11 OCZ GameXStream 700W PSU Nvidia EVGA 7950X2 1400/625 Western Digital RaptorX 150GB (3) Seagate Barracuda 400GB SATA .:Cooling:. Swiftech Storm Rev2 Block Swiftech MCP655™ 12 VDC Pump Swiftech MCR320 QP 3X120mm Rad [B]Genie Bios:[/B] [SIZE="2"]PPM function......................Disabled CPU clock..........................340MHz PCIE Clock.........................105MHz SATA Clock........................Fix 100MHz CPU VID............................+ 250.0mV Default VID........................1.32500V CPU VTT............................1.30V DRAM Voltage......................2.35 NB Voltage..........................1.60V Auto Detect PCI...................Enabled Spread Spectrum..................Disabled Memory Hole Remap..............Enabeld[/SIZE] [B]DRAM timing and Config:[/B] [SIZE="2"]DRAM timing Select..............Manual CAS Latency.......................4 DRAM RAS# to CAS# Delay....5 DRAM RAS# Precharge..........4 Precharge Delay (tRAS).........11 System Memory Freq............800 Refresh Mose Select...........15.6 us Write to Precharge Delay.........13 Write to Read Delay (same).....11 Write to Read Delay (diff)........2 Read to Write Delay................2 Write Recovery.......................1 Read Recovery.......................1 Data A Drive Strength...........3.00X Data B Drive Strength............3.00X x8 Control Drive Strength.......2.25X x16 Control Drive Strength......2.25X x8 Clock Drive Strength...........2.25X x16 Clock Drive Strength..........2.25X Command A Drive Strength.......2.25X Command B Drive Strength........2.25X[/SIZE] 3dMark2001SE/Everest/Orthos Prime 3dMark03 3dMark05 3dMark06 Aquamark3 X6800 on DFI975x/g (12/01/06) 340X11 = 3750Mhz 4-5-4-11 Share this post Link to post Share on other sites More sharing options...
chefnr1 Posted April 21, 2007 Posted April 21, 2007 this is as far i get yet whit my board in sign.. Share this post Link to post Share on other sites More sharing options...
Chump Posted April 23, 2007 Posted April 23, 2007 DFI LANPARTY UT ICFX3200-T2R/G REV.A (BETA BIOS R6T_041) INTEL CORE 2 DUO E6400 CONROE 2.13GHZ 2M L2 CACHE OCZ PC2-8500 2GB (2 x 1GB) PN:OCZN1066SR2GK XFX 6800GT 256MB ARCTIC COOLING NV SILENCER 5 (93.71 Drivers) MAXTOR SATA II 250GB HDD (7V250FO) SONY DUAL LAYER DVD RW (DRU-820A) OCZ GAMEXSTREEM 700W PSU [B]Genie BIOS Settings:[/B] [COLOR=red]CPU VID Control................ - 1.54375V[/COLOR] [COLOR=red]CPU VID Special Add............ - Auto[/COLOR] [COLOR=red]DDR2 RAM 1.8V Voltage.......... - 2.20V[/COLOR] [COLOR=red]CPU VTT 1.2V Voltage........... - 1.39V[/COLOR] [COLOR=red]NB Core 1.2V Voltage........... - 1.59V[/COLOR] [COLOR=red]NB PLL 1.8V Voltage............ - 2.03V[/COLOR] [COLOR=red]NB PLL 1.2V Voltage............ - 1.38V[/COLOR] [COLOR=red]NB PCI-E 1.2V Voltage.......... - 1.34V[/COLOR] [COLOR=red]NB Core 1.2V Convert From...... - 2.14V[/COLOR] [COLOR=red]SB Core 1.2V Voltage........... - 1.34V[/COLOR] [COLOR=red]Clockgen Voltage............... - 3.40V[/COLOR] [COLOR=red]GTL REF Voltage Control........ - Disabled[/COLOR] [COLOR=red]CPU Core 1/2 GTL REF Volt...... - 48[/COLOR] [COLOR=red]CPU Core 3/4 GTL REF Volt...... - 48[/COLOR] [COLOR=red]North Bridge GTL REF Volt...... - 128[/COLOR] [COLOR=red]CPU PLL Setting Override....... - Enable[/COLOR] [COLOR=red]PLL Override Loop Count........ - Auto[/COLOR] [COLOR=red]Conroe P-State Multiplier...... - x 8[/COLOR] [COLOR=red]C1E Function................... - Disabled[/COLOR] [B]Performance Options:[/B] [COLOR=red]Memory Clock Frequency......... - Auto[/COLOR] [COLOR=red]Current Memory Clock........... - 533[/COLOR] [COLOR=red]Control CPU Frequency.......... - Manual[/COLOR] [COLOR=red]CPU Frequency(MHz)............. - 450[/COLOR] [COLOR=red]NB FSB Strapping............... - 333[/COLOR] [COLOR=red]PCIE Overclock................. - 100[/COLOR] [COLOR=red]Software Reset Clockgen........ - Disabled[/COLOR] [COLOR=red]Memory Overclocking............ - Enable[/COLOR] [COLOR=red]Overclocking Frequency(MHz).... - 571[/COLOR] [B]Northbridge Selections:[/B] [COLOR=red]Memory Channels................ - Auto[/COLOR] [COLOR=red]Memory Power Management........ - Disabled[/COLOR] [COLOR=red]IGD Clock Gate................. - Disabled[/COLOR] [COLOR=red]NB Channel Mapping............. - Auto[/COLOR] [COLOR=red]Simple Addr Translation........ - Disable[/COLOR] [COLOR=red]Chip-Select Swap............... - Disable[/COLOR] [COLOR=red]Burst Lenght................... - 8[/COLOR] [COLOR=red]Bank0 Map GFX.................. - 4[/COLOR] [COLOR=red]Bank1 Map GFX.................. - 5[/COLOR] [COLOR=red]Bank2 Map GFX.................. - 6[/COLOR] [COLOR=red]Channel Mapping NB............. - 5[/COLOR] [COLOR=red]Channel Mapping GFX............ - 1[/COLOR] [COLOR=red]Bank0 Map NB................... - 5[/COLOR] [COLOR=red]Bank1 Map NB................... - 11[/COLOR] [COLOR=red]Bank2 Map NB................... - 7[/COLOR] [B]Memory Timing Menu:[/B] [COLOR=red]CS Output Timing............... - Delay 1/4 Clock[/COLOR] [COLOR=red]CK Output Timing............... - Auto[/COLOR] [COLOR=red]Duel Channel Split Mode........ - Auto[/COLOR] [COLOR=red]Addr/CMD Driving Pre-Amp....... - Disable[/COLOR] [COLOR=red]Addr/CMD Driving Strength...... - 05[/COLOR] [COLOR=red]Clocking Driving Pre-Amp....... - Always[/COLOR] [COLOR=red]Clocking Driving Strength...... - 05 [/COLOR] [COLOR=red]Address/Command Timing......... - 2T[/COLOR] [COLOR=red]Memory Timing Select........... - Manual[/COLOR] [COLOR=red]CAS Timing (TCAS).............. - 5[/COLOR] [COLOR=red]Read RAS-CAS Delay (TRCDT)..... - 5[/COLOR] [COLOR=red]Write RAS-CAS Delay (TRCDR).... - 4[/COLOR] [COLOR=red]RAS Precharge Time TRP......... - 5[/COLOR] [COLOR=red]Cycle Time (TRAS).............. - 8[/COLOR] [COLOR=red]Row Cycle Time (TRC)........... - 8[/COLOR] [COLOR=red]Refresh To Active (TRFC)....... - 32[/COLOR] [COLOR=red]Bank To Bank CMD (TRRD)........ - 3[/COLOR] [COLOR=red]Write Recovery (TWR)........... - 3[/COLOR] [COLOR=red]Read-Write Command (TRTW)...... - 3[/COLOR] [COLOR=red]Write-Write CS (TRTR_CS)....... - 2[/COLOR] [COLOR=red]Write -Read Commad (TWTR)...... - 3[/COLOR] [COLOR=red]Write-Read CS (TWTR_CS)........ - 2[/COLOR] [COLOR=red]Read-Read CS (TRTR_CS)......... - 2[/COLOR] [COLOR=red]Read Data Transfer............. - 5[/COLOR] [B]Memory Timing Menu:[/B] [COLOR=red]Read Data Transfer............. - Enable[/COLOR] [COLOR=red]Read Strobe Delay.............. - Disable[/COLOR] [COLOR=red]Read Strobe Arrival............ - Enable[/COLOR] [B]FSB IO Strength:[/B] [COLOR=red]FSB IO Driving Control......... - Default[/COLOR] [COLOR=red]1X NMOS Strength............... - 10h[/COLOR] [COLOR=red]1X PMOS Strength............... - 10h[/COLOR] [COLOR=red]2X NMOS Strength............... - 10h[/COLOR] [COLOR=red]2X PMOS Strength............... - 10h[/COLOR] [COLOR=red]4X NMOS Strength............... - 10h[/COLOR] [COLOR=red]4X PMOS Strength............... - 10h[/COLOR] Orthos (SP2004) + 3dMark2001SE + 2x CPU-Z 3dMark2003: 3dMark2005: 3dMark2006: short description: 450 x 8 = 3.6GHZ @ 1.54375v 5-5-5-8 2T @ 2.2V DDR 1142 Share this post Link to post Share on other sites More sharing options...
chefnr1 Posted April 23, 2007 Posted April 23, 2007 seems to be a nice betabios BETA BIOS R6T_041 Chump , but where to find it, sure whant to try it out Share this post Link to post Share on other sites More sharing options...
mknwatt Posted May 8, 2007 Posted May 8, 2007 ASUS P5N32-E SLI, 1002 BIOS OCZ Gold 2GB (2 x 1GB) DDR2-1100 (OCZ2G11002GK) Intel Core 2 Duo E6300 Conroe 1.86GHz 2M shared L2 Cashe (L651B240), Swifttech Storm Rev.2 BFG 8800GTX 768MB 384-bit GDDR3 PCI-E x16 @ 600/900 ~ NVIDIA 158.19 drivers, DD NV-88GTX 2x Western Digital Caviar SE WD1600JS 160GB 7200 RPM 8MB Cache SATA 3.0Gb/s RAID-0 SONY DVD RW DRU-700A PC Power & Cooling Silencer 750 Quad (Black) NB Cooling = DD-680i Chipset Block ~ Modded SB Cooling = Thermaltake Extreme Spirit II Mosfet Cooling = 2x Thermalright HR-09U *BIOS ScreenShots* ======================== [b]Extreme Tweaker[/b] [color=red] AI Tuning................................... – Manual[/color] [color=grey]x Overclock Options........................... – Disabled x N.O.S Options............................... – Disabled[/color][color=red] > System Clocks > FSB & Memory Config > Overclocking > Over Voltage SLI Broadcast Aperture...................... – Disabled NVIDIA GPU Ex............................... – Disabled SLI-Ready Memory............................ – Not Detected[/color] [b]System Clocks[/b] [color=red] PCIEX16_1 Frequency (MHz).................... – 100 PCIEX16_2 Frequency (MHz).................... - 100 PCIEX16_3 Frequency (MHz).................... - 100 SPP<->MCP Ref Clock, MHz..................... – Auto[/color] [b]FSB & Memory Config[/b] [color=red] FSB – Memory Clock Mode.................... – Linked FBS – Memory Rotio......................... – Sync Mode FSB (QDR), MHz............................. – 2060[/color] [color=grey]Actual FSB (QDR), MHz..................... - 2060 x MEM (DDR), Mhz............................. – Linked Actual MEM (DDR), MHz..................... - 1030[/color] [b]Overclocking[/b] [color=red] CPU Multiplier.............................. – 7 > Memory Timing Setting > Spread Spectrum Control CPU Internal Thermal Control................ – Disabled Limit CPUID MaxVal.......................... – Disabled Enhanced C1 (C1E) .......................... – Disabled Execute Disable Bit......................... – Disabled Virtualization Technology................... – Disabled Enhanced Intel SpeedStep™ Tech.............. – Disabled LDT Frequency............................... - 5x [/color] [b]Memory Timng Setting[/b] [color=red] tCL (CAS Latency)............................ - 5 tRCD......................................... – 5 tRP.......................................... - 5 tRAS......................................... - 15 Command Per Clock (CMD)...................... – 2 clock ** Advanced Memory Settings ** tRRD......................................... - 5 tRC.......................................... – 27 tWR.......................................... - 6 tWTR......................................... - 10 tREF......................................... – 2 tRD.......................................... - 12 tRFC......................................... - 58 Async Latency................................ – Auto[/color] [b]Spread Spectrum Control[/b] [color=red] [color=grey]x CPU Spread Spectrum........................ – Disable[/color] PCIE Spread Spectrum....................... - Disabled MCP PCIE Spread Spectrum................... - Disabled SATA Spread Spectrum....................... - Disabled LDT Spread Spectrum........................ – Disabled[/color] [b]Over Voltage[/b] [color=red] VCore Voltage................................. - 1.47500V Memory Voltage................................ – 2.275V 1.2V HT Voltage............................... – 1.30V NB Core Voltage............................... - 1.65V SB Core Voltage............................... - 1.55V CPU VTT Voltage............................... - 1.40v DDRII Controller Ref Voltage.................. – DDR2_Vol/2+20mv DDRII Channel A Ref Voltage................... – DDR2_Vol/2+20mv DDRII Channel B Ref Voltage................... – DDR2_Vol/2+20mv [/color] ========== Orthos - Everest 4.0 – 2x CPUz - 3DMark2001SE:55484 3DMark2003:40791 3DMark2005:19201 3DMark2006:11960 Short description: E6300 515x7 @ 3.6Ghz 5-5-5-15 Share this post Link to post Share on other sites More sharing options...
Chump Posted May 8, 2007 Posted May 8, 2007 ASUS STRIKER EXTREME (BIOS 1102) INTEL CORE 2 DUO E6600 CONROE 2.4GHZ 4M L2 CACHE OCZ PC2-8500 SLI 2GB (2 x 1GB) PN:OCZN1066SR2GK INNO3D 8800GTS 320MB OC 595/950 (158.19 DRIVERS) MAXTOR SATA II 250GB HDD (7V250FO) SONY DUAL LAYER DVD RW (DRU-820A) OCZ GAMEXSTREEM 700W PSU [B]Extreme Tweaker:[/B] [COLOR=red]AI Tuning...................... - Manual[/COLOR] [COLOR=red]x Overclock Options............ - Disabled[/COLOR] [COLOR=red]x N.O.S Options................ - Disabled[/COLOR] [COLOR=red]> System Clocks[/COLOR] [COLOR=red]> FSB & Memory Config[/COLOR] [COLOR=red]> Overclocking[/COLOR] [COLOR=red]> Over Voltage[/COLOR] [COLOR=red]SLI Broadcast Aperture......... - Disabled[/COLOR] [COLOR=red]NVIDIA GPU EX.................. - Disabled[/COLOR] [COLOR=red]SLI - Ready Memory............. - Disabled Disabled[/COLOR] [B]System Clocks:[/B] [COLOR=red]PCIEX16_1 Frequency (MHz)...... - 100[/COLOR] [COLOR=red]PCIEX16_2 Frequency (MHz)...... - 100[/COLOR] [COLOR=red]PCIEX16_3 Frequency (MHz)...... - 100[/COLOR] [COLOR=red]SPP <-> MCP Ref Clock, MHz..... - Auto[/COLOR] [B]FSB & Memory Cinfig:[/B] [COLOR=red]FSB - Memory Clock Mode........ - linked[/COLOR] [COLOR=red]x FSB - Memory Ratio........... - Sync[/COLOR] [COLOR=red]FSB (QDR), MHz................. - 1600[/COLOR] [COLOR=red]Actual FSB (QDR), MHz.......... - 1600[/COLOR] [COLOR=red]MEM (DDR), MHz................. - 800[/COLOR] [COLOR=red]Actual MEM (DDR), MHz.......... - 800[/COLOR] [B]Overclocking:[/B] [COLOR=red]CPU Type - Intel (R) Core (TM) 2 CPU[/COLOR] [COLOR=red]CPU Speed...................... - 3.6GHz[/COLOR] [COLOR=red]Cache RAM...................... - 4096k[/COLOR] [COLOR=red]CPU Multiplier................. - 9[/COLOR] [COLOR=red]> Memory Timing Setting[/COLOR] [COLOR=red]> Spread Spectrum Control[/COLOR] [COLOR=red]CPU Internal Thermal Control... - Disabled[/COLOR] [COLOR=red]Limit CPIUD MaxVal............. - Disabled[/COLOR] [COLOR=red]Enhanced C1 (C1E).............. - Enabled[/COLOR] [COLOR=red]Execute Disable Bit............ - Disabled[/COLOR] [COLOR=red]Virtualization Technology...... - Disabled[/COLOR] [COLOR=red]Enhanced Speed Step (tm) tech.. - Disabled[/COLOR] [COLOR=red]LDT Frequency.................. - 5x[/COLOR] [B]Memory Timing Setting:[/B] [COLOR=red]tCL (CAS Latency).............. - 4[/COLOR] [COLOR=red]tRCD........................... - 4[/COLOR] [COLOR=red]tRP............................ - 4[/COLOR] [COLOR=red]tRAS........................... - 8[/COLOR] [COLOR=red]Command Per Clock (CMD)........ - 1[/COLOR] [COLOR=red]** Advanced Memory Settings **[/COLOR] [COLOR=red]tRRD........................... - 5[/COLOR] [COLOR=red]tRC............................ - 8[/COLOR] [COLOR=red]tWR............................ - 5[/COLOR] [COLOR=red]tWTR........................... - 7[/COLOR] [COLOR=red]tREF........................... - Auto[/COLOR] [COLOR=red]tRD............................ - Auto[/COLOR] [COLOR=red]tRFC........................... - 22[/COLOR] [COLOR=red]Async Latency.................. - Auto[/COLOR] [B]Over Voltage:[/B] [COLOR=red]VCore Voltage.................. - 1.53750v[/COLOR] [COLOR=red]Memory Voltage................. - 2.225v[/COLOR] [COLOR=red]1.2V HTT Voltage............... - 1.60v[/COLOR] [COLOR=red]NB Core Voltage................ - 1.55v[/COLOR] [COLOR=red]SB Core Voltage................ - 1.65v[/COLOR] [COLOR=red]CPU VTT Voltage................ - 1.50v[/COLOR] [COLOR=red]DDR Controller Ref Voltage..... - Auto[/COLOR] [COLOR=red]DDR Channel A Ref Voltage...... - Auto[/COLOR] [COLOR=red]DDR Channel B Ref Voltage...... - Auto[/COLOR] Orthos (SP2004) + 3dMark2001SE + 3x CPU-Z 3dMark2003: 3dMark2005: 3dMark2006: short description: 400 x 9 = 3.6GHZ @ 1.53750v 4-4-4-8 1T @ 2.225V DDR800 Share this post Link to post Share on other sites More sharing options...
green-man Posted May 20, 2007 Posted May 20, 2007 DFI LANPARTY UT ICFX3200-T2R/G, 4/26/07 BETA BIOS A-DATA EXTREME 1000+ 2 x 1GB DDR2-1000 (PC2 8000) Intel Core 2 Duo E6600 Conroe 2.40GHz 4MB L2 Sapphire X1900XT-X 512MB GDDR3 PCI-E 16x @ Stock , Catalyst 7.4 Samsuns Spinpoint P120s 250GB 7200 RPM 8MB Cache SATA 3.0Gb/s Hard Drive Pioneer DVR 111DBK DVD-RW drive Siverstone ST85F 850W Power Supply Custom h2o cooling ========== [b]Genie BIOS Settings:[/b] [color=red] CPU VID Control................ - 1.46875 CPU VID Special Add............ - Auto DDR2 RAM 1.8V Voltage.......... - 2.23V CPU VTT 1.2V Voltage........... - 1.29V NB Core 1.2V Voltage........... - 1.48V NB PLL 1.8V Voltage............ - 2.13V NB PLL 1.2V Voltage............ - 1.38V NB PCI-E 1.2V Voltage.......... - 1.34V NB Core 1.2V Convert From...... - 2.14V SB Core 1.2V Voltage........... - 1.34V Clockgen Voltage............... - 2.92V GTL REF Voltage Control........ - Enabled CPU Core 1/2 GTL REF Volt...... - 48 CPU Core 3/4 GTL REF Volt...... - 48 North Bridge GTL REF Volt...... - 128 CPU PLL Setting Override....... - ENABLE PLL Override Loop Count........ - Auto Conroe P-State Multiplier...... - X 8 C1E Function................... - Disable [/color] [b]Performance Options:[/b] [color=red] Memory Clock Frequency......... - sync Current Memory Clock........... - 266 Control CPU Frequency.......... - Manual CPU Frequency(MHz)............. - 438 NB FSB Strapping............... - 333 PCIE Overclock................. - 100 Software Reset Clockgen........ - Enabled Memory Overclocking............ - Disable Overclocking Frequency(MHz).... - 266 [/color] [b]Northbridge Selections:[/b] [color=red] Memory Channels................ - Channel A & B Memory Power Management........ - Disable IGD Clock Gate................. - Disable NB Channel Mapping............. - Auto Simple Addr Translation........ - Disable Chip-Select Swap............... - Disable Burst Lenght................... - 4 Bank0 Map GFX.................. - 4 Bank1 Map GFX.................. - 5 Bank2 Map GFX.................. - 6 Channel Mapping NB............. - 5 Channel Mapping GFX............ - 1 Bank0 Map NB................... - 5 Bank1 Map NB................... - 11 Bank2 Map NB................... - 7 [/color] [b]Memory Timing Menu:[/b] [color=red] CS Output Timing............... - Auto CK Output Timing............... - Auto Duel Channel Split Mode........ - Auto Addr/CMD Driving Pre-Amp....... - Disable Addr/CMD Driving Strength...... - 12 Clocking Driving Pre-Amp....... - Always Clocking Driving Strength...... - 12 Address/Command Timing......... - Auto Memory Timing Select........... - Auto CAS Timing (TCAS).............. - 4 Read RAS-CAS Delay (TRCDT)..... - 4 Write RAS-CAS Delay (TRCDR).... - 4 RAS Precharge Time TRP......... - 4 Cycle Time (TRAS).............. - 12 Row Cycle Time (TRC)........... - 20 Refresh To Active (TRFC)....... - 36 Bank To Bank CMD (TRRD)........ - 3 Write Recovery (TWR)........... - 5 Read-Write Command (TRTW)...... - 3 Write-Write CS (TRTR_CS)....... - 2 Write -Read Commad (TWTR)...... - 3 Write-Read CS (TWTR_CS)........ - 2 Read-Read CS (TRTR_CS)......... - 2 Read Data Transfer............. - 5 [/color] [b]Memory Timing Menu:[/b] [color=red] Read Data Transfer............. - Enable Read Strobe Delay.............. - Disable Read Strobe Arrival............ - Enable [/color] [b]FSB IO Strength:[/b] [color=red] FSB IO Driving Control......... - Default 1X NMOS Strength............... - N/A 1X PMOS Strength............... - N/A 2X NMOS Strength............... - N/A 2X PMOS Strength............... - N/A 4X NMOS Strength............... - N/A 4X PMOS Strength............... - N/A [/color] ========== short description: 438 x 8 = 3.5Ghz @ 1.46875v 4-4-4-4-12 sync 2T @ 2.23v 876Mhz Share this post Link to post Share on other sites More sharing options...
Recommended Posts
Please sign in to comment
You will be able to leave a comment after signing in
Sign In Now