Guest MadDias Posted March 9, 2008 Posted March 9, 2008 phenoms seem to be disappointing. a few guys on xs got threads about ocing their phenoms. 2.6ghz seems to be the average oc on these cpus. most superpi1m runs i´ve seen are close or a little slower (clock to clock) to what we got going on here with our superpi racetrack. to me it seems as it would be a k8 with 4 cores, although it´s a new architecture. Share this post Link to post Share on other sites More sharing options...
kitfit1 Posted March 9, 2008 Posted March 9, 2008 phenoms seem to be disappointing. a few guys on xs got threads about ocing their phenoms. 2.6ghz seems to be the average oc on these cpus.most superpi1m runs i´ve seen are close or a little slower (clock to clock) to what we got going on here with our superpi racetrack. to me it seems as it would be a k8 with 4 cores, although it´s a new architecture. I've just built a Phenom rig for my next door nieghour, and found pretty much the same as MadDias has said. I had a go at clocking it, before handing it to him at stock. Not impressed one little bit, as a cpu for clocking they are a waste of time and effort. Pi times were rubbish as well Ed. In fact my old Opty 170 was faster. Share this post Link to post Share on other sites More sharing options...
Jaysway Posted April 5, 2008 Posted April 5, 2008 anyone got a 939 ultra D or sli or expert i can steal ?beg borrow or buy ? Share this post Link to post Share on other sites More sharing options...
Kingfisher Posted April 5, 2008 Posted April 5, 2008 anyone got a 939 ultra D or sli or expert i can steal ?beg borrow or buy ? check the for sale thread or start one with the board you are looking to buy or check ebay. google google google. Share this post Link to post Share on other sites More sharing options...
Jaysway Posted April 5, 2008 Posted April 5, 2008 yeah i got that man but some of my friends here come first Share this post Link to post Share on other sites More sharing options...
johnnymack Posted April 24, 2008 Posted April 24, 2008 I finally got around to O/Cing my box after using it for the last 12 months at stock settings. After about 2 hours of messing around, I was able to hit 3192 MHz without failures using these settings: 14X CPU FSB 5X CPU n' NB Bus Ratio 228 CPU clk 1.475 CPU Voltage 2.0 DRAM Voltage Pushing it to 229 CPU clk causes instability booting. SO, my question is: How high can I go with CPU Voltage settings? I see that 1.5v is the highest setting in white font.. the next setting [1.525] is shown in the RED font, which I presume is no-mans land? Or just a warning? :confused: Share this post Link to post Share on other sites More sharing options...
dr_bowtie Posted April 25, 2008 Posted April 25, 2008 just a warning...now you need to play with the ram to get higher Share this post Link to post Share on other sites More sharing options...
Techtrancer Posted July 5, 2008 Posted July 5, 2008 (edited) Techtrancer / Operon 170 Denmark / 3404,6MHz / 340,5MHz / 1,7v / 2 x 1024 MB Kingston HyperX PC4000, Qimonda CF-5 / 283,7MHz / 3-3-2-2-Cr1 / 3,19 V / DFI Lanparty UT CFX3200-DR / water cooling / 24,922 sec AMD Opteron 170 Denmark * 3,33 GHz @ 1,520 V * LCBQE 0722 RPBW * water cooling @ 26 Edited July 5, 2008 by Techtrancer Share this post Link to post Share on other sites More sharing options...
kitfit1 Posted July 6, 2008 Posted July 6, 2008 Nice clocks there Techtrancer. None of them will get you into the 3G club though i'm afraid. Have a read of the rules on the first page of this thread. Run the required apps and post them up in the 939 Overclocking Database. I wish my old 175 had done 3.3ghz, it would'nt even boot to windows past 3.25ghz, and that was under phase. Share this post Link to post Share on other sites More sharing options...
MadDias Posted July 7, 2008 Posted July 7, 2008 (edited) hey guys.. it Edited July 7, 2008 by MadDias Share this post Link to post Share on other sites More sharing options...
hardnrg Posted July 7, 2008 Posted July 7, 2008 I have since sold ALL these CPUs, bar the X2 3800+... I can't re-run these since these are all very old and from the original 939 competition thread if you can't add these because of the requirements, oh well... this is what I got with my beloved DFI NF4 Ultra-D Air setup (*sigh* good times) --- X2 3800+ Toledo 512k (No IHS) LCB9E 0719RPMW Air, Thermalright Ultra 120 lapped Suicide @ 3126 MHz, 1.616 V ---- 3500+ Venice (No IHS) LBBLE 0520EPMW TEC & water, Swiftech MCW6500-T Suicide @ 3134 MHz, 1.600 V --- Opteron 148 (No IHS) CABNE 0536GPMW Air, Thermalright XP-120 lapped Suicide @ 3209 MHz, 1.632 V --- Opteron 146 (No IHS) CABYE 0540FPBW Air, Thermalright XP-120 lapped suicide @ 3221 MHz, 1.568 V spi1m @ 3133 MHz, 26.515s spi32m @ 3071 MHz, 25m 55.078s Share this post Link to post Share on other sites More sharing options...
Techtrancer Posted July 9, 2008 Posted July 9, 2008 (edited) Nice clocks there Techtrancer. None of them will get you into the 3G club though i'm afraid. Have a read of the rules on the first page of this thread. Run the required apps and post them up in the 939 Overclocking Database. I wish my old 175 had done 3.3ghz, it would'nt even boot to windows past 3.25ghz, and that was under phase. thank you for information. i have only this screenshots and i have sell most of the CPU Edited July 9, 2008 by Techtrancer Share this post Link to post Share on other sites More sharing options...
Recommended Posts
Please sign in to comment
You will be able to leave a comment after signing in
Sign In Now