norazwan79 Posted May 15, 2006 Posted May 15, 2006 ok...thanks ur guide tasr. now i need time to study n learn about dfi mobo. and after that i try n try to get best seting for oc my cpu n ram. Share this post Link to post Share on other sites More sharing options...
tasr Posted May 25, 2006 Posted May 25, 2006 Well time for an update. I don’t see a lot of people meeting my challenge. I’m still running solid at 2.7Ghz 1.350v@113% = 1.50v Vcore (roughly) with temp at 27C Idle and 45C Loaded. I am duel core prime95 stable for over 12 hours I've gotten higher to 2.8Ghz with 1.55v Vcore, but failed duel prime at 3hr. I backed it down to 2.775Ghz with 1.55v Vcore and failed duel prime at the 10hr mark. My temps got a little warm at 51C at load. I cooling with air and personally I don’t like temps this high. You’ll need to post your results in the Overclocking Database and according to the rules of DFI-Street. Post your short description here and link to your Overclocking Database post, like this. Short Description: 246x11 @ 2706Mhz, 1.350v + 113% 2.5-3-8-3 @ 2.8v vdimm My Overclocking Database post. Lets see those x2 4400. Share this post Link to post Share on other sites More sharing options...
bozotheclown Posted July 11, 2006 Posted July 11, 2006 I don't really feel challanged:) I’m running solid at 2.7Ghz 1.3v*110% = 1.43v Vcore (roughly) with temp at 28C Idle and 42C Loaded. I ran dual core prime95 stable for over 7x24 hours. Short Description: 246x11 @ 2706Mhz, 1.3v * 110% 2.5-3-6-2 @ 2.6v vdimm I'm in the process of making pictures of my bios settings etc. I'll post them in the oc-db as soon as I'm done. Share this post Link to post Share on other sites More sharing options...
retepetsir Posted August 14, 2006 Posted August 14, 2006 Only just joined up, so need to make my entry in the overclocking database, but how about this? I know it's a 4200+........but well, it starts off at the same clock speed . Verified result here: http://valid.x86-secret.com/show_oc?id=112117 Currently been running Prime95 for over 24hr's, cooled on air (Zalman 9000) and at 1.39v . I guess I'm just lucky, although its taken a lot of effort to get there. Also memory is 1:1 ratio with FSB! Edit: 39C idle, 42-44C fully loaded. Share this post Link to post Share on other sites More sharing options...
yfital Posted August 14, 2006 Posted August 14, 2006 ah, dude, your really not connected here, your a manchester chip, not toledo, its totally different and you can OC a lot easier... sorry, but i dont think it fits here. Share this post Link to post Share on other sites More sharing options...
retepetsir Posted August 14, 2006 Posted August 14, 2006 Ok fair enough Share this post Link to post Share on other sites More sharing options...
nailzs Posted August 15, 2006 Posted August 15, 2006 I wish I knew how to overclock. I want to so bad. That bloody guide confuses me. This is a good place to start. http://www.blurbdesigns.com/OcCalc/calc.ht...tMux=5&RamRat=1 Share this post Link to post Share on other sites More sharing options...
charles19 Posted August 15, 2006 Posted August 15, 2006 Anyone running these G.Skill Extreme Series 2GB kit (2 x 1GB) Model # F1-4000USU2-2GBHZ on a Ultra-D with an A64 x2 4400? tasr I have the same but with an expert, I run daily at 270*10, it can go higher but it becomes less stable, doesn't like 250*11 at all. Share this post Link to post Share on other sites More sharing options...
h_Us3r Posted August 15, 2006 Posted August 15, 2006 I have the same but with an expert, I run daily at 270*10, it can go higher but it becomes less stable, doesn't like 250*11 at all. What VCORE are you running? Share this post Link to post Share on other sites More sharing options...
Kingfisher Posted August 15, 2006 Posted August 15, 2006 My 2.9ghz seems to be tops so far. I probably can go up to 3.0 but temps would be a problem( running dual prime I go up to 50c, 38c idle). I have added a 12cm blow hole in the top of my case and that has really helped my PSU. Smart guardian says my PWMIC temps are at 30c and chipset at 41c. I never have tried water cooling and perhaps later on I may tinker with the idea. Share this post Link to post Share on other sites More sharing options...
watsonte Posted August 15, 2006 Posted August 15, 2006 My 2.9ghz seems to be tops so far. I probably can go up to 3.0 but temps would be a problem( running dual prime I go up to 50c, 38c idle). I have added a 12cm blow hole in the top of my case and that has really helped my PSU. Smart guardian says my PWMIC temps are at 30c and chipset at 41c. I never have tried water cooling and perhaps later on I may tinker with the idea. Is that Prime Stable? Im looking into the 4400s and seeing how high some of them can go...2.7 seems the top...Id like to think I wouldnt loose anything going from 2.8 FX-57 to a 4400.... Share this post Link to post Share on other sites More sharing options...
Anakin_hollan Posted August 15, 2006 Posted August 15, 2006 Is that Prime Stable? Im looking into the 4400s and seeing how high some of them can go...2.7 seems the top...Id like to think I wouldnt loose anything going from 2.8 FX-57 to a 4400.... Even if you loose 100 Mhz, you'd get 2.700 back from the second core!? That's what I have to remember myself all the time as well... LoL Both are 90nm, both have 1MB per core, but I'd think that the 4400+ will generate more heat... Greetz! Share this post Link to post Share on other sites More sharing options...
Recommended Posts
Please sign in to comment
You will be able to leave a comment after signing in
Sign In Now