Jump to content

FLDC


road-runner

Recommended Posts

 

WOW. I guess no one is mining BTG yet. What pool are you in?

 

Thats not right the converter I was using is showing 200 on btg its not that high..26255043 btg in the last day. suprnova is the pool and there is about 13,000 people in it.

 

I am running 12 cards though... 6-1080ti 2-1080 4-1070

 

https://btg.suprnova.cc/index.php

 

I think I found you on the internet :woot: :woot: :woot:

 

Share this post


Link to post
Share on other sites

Lol thats not me I only have 6-1080ti. I am getting rack or frames and risers though. Seems btg shot up over 200.00 so its not doing to bad... lot better than folding was doing it seems. I hope it just keeps rising, bitcoin cash has been up over a thousand for awhile btc is over 8k right now

Edited by road-runner

Share this post


Link to post
Share on other sites

64-67MH/s for the 1080Ti. One card is at 66.3 and the other is 63.7. It depends on your OC applied. If I push the card to the limit its doing 293watts @ 2050/11750 and just under 68MH/s. Not sure why one hashs more when they are 25mhz apart.

 

 

Also if you are using that pool I linked don't expect any payout for 24hours.

 

Supposed to be around 65Mh. My two last gen Titan XP are around 22Mh each so far.

I wouldn't use the setting 24x32. I'm not sure what exactly that is (I got it from some mining forum) but if you play around with the number your hash goes up and down or crashes. default is like 32x16. You may have better results with that instead.

 

Just pushed everything to the VTC pool and it definitely looks like I will need to  figure out how to improve the hash rate.  

With the current settings 

GTX 1080 is 24-25Mh

GTX 1070 is 22-23Mhz

GTX Titan X 20-22Mh

GTX 1080 Ti 33-34Mh

Share this post


Link to post
Share on other sites

8-1/2 days BTG 6 - 1080ti cards 24/7 part time on the 4 - 1070s and 2 - 1080s had some warm weather so shut them down seems to doing a lot better than fldc about double. If prices rise latter like btc cash did all the better...

Share this post


Link to post
Share on other sites

whattomine calc says .6 a coin / per card but I'm getting over 1 coin per card steady for this whole week. But for the 1080 TI you should be at around 61Mh at defaults and 65-67 overclocked. In the config file of CCminer you can set the launch parameters which from what i'm reading  it is blocks and threads. defaults like 32blocks, 16 threads. You could try different numbers and see if something gives you higher results. IE. 32x16 x18 x 20 x22 x24. or you can leave the threads alone and go up on the blocks to 64x16. IDK. You kinda have to play around with it a lot.

 

I would go by what the console says instead of the pool numbers.

1070 = 30~Mh

1080 = 40Mh

1070 TI (OC) = 42~ Mh

1080 Ti = 60Mh

 

Edit: Changed Image

 

hash.png

Share this post


Link to post
Share on other sites

Please sign in to comment

You will be able to leave a comment after signing in



Sign In Now
×
×
  • Create New...