koolabear

you should have backed up the array onto a single drive first then broke the array on your old board because you didnt you wont be able to use these drives together in a raid array on your new board, do you still have accses to your old board ? if you do then you can set the array back up on it and save your data to a single drive then brake the array, hope this helps

Doh !! dint see that, when i install sata drives i always press f6 to install raid drivers never really have a problem then

hi, i use the asetek block you can get them in 10mm and 1/2" versions i think its down to personal choice though as both blocks are pretty cool, if you went down the 10mm route you can use gpu blocks from say alphacool without having to use reduces

hi i posted here recently about maxtor sata drives having issues you should visit the maxtor site they will provide you with a firmware update i think you have to email them to get it though, also if you search the threads you should find the link, hope this helps you

Save some money get the 3200 venice core instead and overclock it same performance less money

if you want to go down the kit road then i suggest asetek or swiftech otherwise you should look at dangerden or polarflo at the end opf the day it boils down to (excuse the pun) what you wanna spend, how much room in your case and your experienc and if your comfertable with having to mod your case

i think you must have too much time on your hands cos all that bitching aint healthy for you boy !! you wanna take a step outside and see whats been going on in the world during the last five years

Look here-http://maxtor.custhelp.com/cgi-bin/maxtor.cfg/php/enduser/std_adp.php?p_faqid=2685&p_created=1136595488&p_sid=OARfZF_h&p_lva=&p_sp=cF9zcmNoPTEmcF9zb3J0X2J5PSZwX2dyaWRzb3J0PSZwX 3Jvd19jbnQ9MSZwX3Byb2RzPTAmcF9jYXRzPSZwX3B2PSZwX2N 2PSZwX3NlYXJjaF90eXBlPWcrap3dlcnMuc2VhcmNoX25sJnBfc GFnZT0xJnBfc2VhcmNoX3RleHQ9bmZvcmNlNA**&p_li=&p_topview=1

hey if any of you are using Maxtor sata 2 drives and are having issues with them then you should look here for a firmware update -http://maxtor.custhelp.com/cgi-bin/maxtor.cfg/php/enduser/std_adp.php?p_faqid=2685&p_created=1136595488&p_sid=OARfZF_h&p_lva=&p_sp=cF9zcmNoPTEmcF9zb3J0X2J5PSZwX2dyaWRzb3J0PSZwX3Jvd19jbnQ9MSZwX3Byb2RzPTAmcF9jYXRzPSZwX3B2PSZwX2N2PSZwX3NlYXJjaF90eXBlPWcrap3dlcnMuc2VhcmNoX25sJnBfcGFnZT0xJnBfc2VhcmNoX3RleHQ9bmZvcmNlNA**&p_li=&p_topview=1

hey red dragon whats your location i may be able to help you out if your in the uk ?

My cpu is an E4 got a nice stable overclock going dont know about the E6 though

USB drivers are in SP2

64k

i believe it is but you get reduced performance you should be able to get a bridge on ebay though

Hi, it sounds like your signal isnt srong enough you should but an external anntenae with about a metre of cable on it so that you can move it around to obtain a better signal, wirless networking is not as good as the manufacturers claim, hope this helps