rexian Posted July 18, 2005 Posted July 18, 2005 Did the new bios fix your problem including the ultra low bandwidth at 860MB/s? The 310 bios locks CPC enabled (1T) but this should help the mempry performance. Don't know why the JP17 is at 2-3 positon for your Plat Rev2 TCCD memory. Thanks suio for checking back..yes CPC option is now fixed. I am updating my build thread w/ new pix and questions...please check that. I will close this thread as the problem is resolved. Here's the link to my thread: NF4 SLI-DR w/ San Diego 3700+: Help New Build Begins...[MODEM ALERT] Thanks, Rex Share this post Link to post Share on other sites More sharing options...
pumbertot Posted July 18, 2005 Posted July 18, 2005 Did the new bios fix your problem including the ultra low bandwidth at 860MB/s? The 310 bios locks CPC enabled (1T) but this should help the mempry performance. Don't know why the JP17 is at 2-3 positon for your Plat Rev2 TCCD memory. could argue about the jumper setting. when in 1-2 it runs off 3.3V rail and if you stress mem it drops .1-.2Vdimm during stress. thats why people whose mem runs great @ 3.2V when they are on 2-3 jumper setting, doesnt run as good @ 3.2V on 1-2 jumper setting. its similar to the vdimm drop you see with a booster.hence i always have run my vx on 2-3 setting even though they only need 3.2V for 260MHz and they are fine(over 6 months and no probs at all). ive seen similar things running some ocz pc4800 @ 2.9V on 1-2 setting. couldnt get stable above 300MHz whereas @ 2.9V on 2-3 i could get to 315MHz. screw safety, if that was paramount then why overclock everything and voltmod gfx cards etc? Share this post Link to post Share on other sites More sharing options...
Recommended Posts
Please sign in to comment
You will be able to leave a comment after signing in
Sign In Now