tommymeggs Posted August 9, 2007 Posted August 9, 2007 Hi all, I am new here and have been having a real hard time geting information on proper ESD practices. I have purchased a new anti-static wrist strap for the computer I am starting to build. However, I have been told to clip onto the computer case to equalize the charge. Another said to clip onto the case but leave it pluged in. Than I am told to ground myself to the ground plug in an outlet (just the ground plug). But here is my dilema (Spelling??). I have a case with a removable mother board tray. How do I ground myself when the tray is on the table and I have to attach the mother board to the tray. How do I keep down the static befor I have the board in the case, or when I am takeing the memory out of it package to install it? ANOTHER question, I have a box of latex examination gloves. You would thing that these would be PERFECT! They are insulated and therefor static charge cannot get through???? Please help me in this very basic part of building a computer. Thanks Tommymeggs [email protected] Share this post Link to post Share on other sites More sharing options...
gunak87 Posted August 9, 2007 Posted August 9, 2007 I've used an anti-static wrist strap once in my life. It was really annoying so I said screw it. You'll be fine if you just touch an unpainted metal part of your case before you get to working on it. Just don't run around in socks while combing your hair with your CPU. Share this post Link to post Share on other sites More sharing options...
vaio Posted August 9, 2007 Posted August 9, 2007 I just regularly touch a bare metal part of the inside of the case whilst working, never had any problems with static to date. Just make sure you have all the stuff you need to hand before starting to avoid unnecessary static build up from carpets etc. Share this post Link to post Share on other sites More sharing options...
WhenKittensATK Posted August 9, 2007 Posted August 9, 2007 My PC teacher was overzealous about it, but I never used one. Like the other said before, just touch the chassis inside and you should be fine. Share this post Link to post Share on other sites More sharing options...
jack_of_java Posted August 9, 2007 Posted August 9, 2007 I like to use latex gloves that I get from work while working on comps. Eliminates any oil getting on the board from your fingers, and works especially well when cleaning the AS5 off components (even though that stuff seems to get everywhere!). Then all you have to do is throw them away when complete. But I haven't had any static problems wearing them. Share this post Link to post Share on other sites More sharing options...
flareback Posted August 9, 2007 Posted August 9, 2007 Just don't run around in socks while combing your hair with your CPU. What? your not supposed to use a cpu as a comb? I've never had a problem with static, built several machines, worked on several more. Like everyone else said, touch bare metal before touching anything important. And don't wear socks while building it, socks are uncomfortable, just go barefoot all the time. Share this post Link to post Share on other sites More sharing options...
WhenKittensATK Posted August 9, 2007 Posted August 9, 2007 gloves would be fine if you didn't want your greasy little fingerprints on all the metal parts. Share this post Link to post Share on other sites More sharing options...
Bleeble Posted August 9, 2007 Posted August 9, 2007 Like everyone else, I've never had any problems with ESD. My only precaution is touching the case before I touch any computer parts. Heck, I even work on my PC while I'm laying on the carpet in my room. BUT it only takes one time to fry your mobo or RAM... Using a wrist strap is probably a good idea. I'd attach it to the case. Share this post Link to post Share on other sites More sharing options...
nightsider Posted August 9, 2007 Posted August 9, 2007 i have built several machines and i have never used a writst strap and i have never had any issues with static Share this post Link to post Share on other sites More sharing options...
suchuwato Posted August 9, 2007 Posted August 9, 2007 While it's good practice, in reality you shouldn't need a grounding strap, unless you are a n00b and are building on carpet and wearing nylon clothing Share this post Link to post Share on other sites More sharing options...
Bleeble Posted August 9, 2007 Posted August 9, 2007 While it's good practice, in reality you shouldn't need a grounding strap, unless you are a n00b and are building on carpet and wearing nylon clothing Don't forget the silk underwear! Share this post Link to post Share on other sites More sharing options...
gotdamojo06 Posted August 10, 2007 Posted August 10, 2007 I agree with everyone else, the only time that I have worn a anti-static wrist band was when I was a computer tech for Grand Blanc High School during my junior year. I was not only required to use the wrist band, I was also required to use an anti-static floor mat as well as one that was set under the case on top of the table or other surface I was working on, which was really really annoying. I think that they are just another way to get people to spend money on useless products. I also only touch the bare metal of the case before working, a few times while working, I also do all my work in my room which has no carpet, just hardwood floors, took the carpet out when I was 14, didn't much care for baby blue carpet Share this post Link to post Share on other sites More sharing options...
Recommended Posts
Please sign in to comment
You will be able to leave a comment after signing in
Sign In Now