road-runner Posted June 14, 2007 Posted June 14, 2007 Hey guys I am getting ready to install water cooling on the GA P35 DQ6 so I took the heat pipe cooler off and the MCW30 will not fit the Southbridge. I had planned to cool the North and Southbridge. My question is just how hot do they get? I could either... 1. Put the heat pipe back cooler back on and just water cool the CPU and video card. 2. Water cool the Northbridge only and leave the Southbridge with nothing if it does not get that hot, maybe stick a few of these on it. 3. Wait and order something else to stick on the Southbridge. Share this post Link to post Share on other sites More sharing options...
coolcat97 Posted June 14, 2007 Posted June 14, 2007 I think they look really nice. I'd keep them. Share this post Link to post Share on other sites More sharing options...
road-runner Posted June 14, 2007 Posted June 14, 2007 (edited) I think they look really nice. I'd keep them. This is not for looks, its for the highest performance. I guess I can try it and redo it latter if it does not cool enough. Edited June 14, 2007 by road-runner Share this post Link to post Share on other sites More sharing options...
nVidia_Freak Posted June 14, 2007 Posted June 14, 2007 In my experience, the sb has never gotten hot enough to put more than a heatsink on it. The nb on the other hand, I can see usefulness in wc'ing it. So if you can, wc the nb and find a seperate heatsink for the sb. Perhaps something off an older motherboard you don't use. Or, you could do what you mentioned, put the passive heat pipe cooler back on and just wc the cpu. (assuming you'll still have decent air flow.) Share this post Link to post Share on other sites More sharing options...
coolcat97 Posted June 14, 2007 Posted June 14, 2007 This is not for looks, its for the highest performance. I guess I can try it and redo it latter if it does not cool enough. I know but the bridges don't really get that hot. Share this post Link to post Share on other sites More sharing options...
andrusk Posted June 15, 2007 Posted June 15, 2007 I know the northbridge on my rig gets smokin hot! The heatpipes that ASUS installs are pure crap so I decided to replace it with a thermaltake extreme spirit II. It cools the bridges really well. I would recommend watercooling your northbridge and putting one of these guys on your south bridge Share this post Link to post Share on other sites More sharing options...
coolcat97 Posted June 15, 2007 Posted June 15, 2007 If south is the lower bridge (yeah, i am a noob) then its hotter down south for me. Share this post Link to post Share on other sites More sharing options...
kingdingeling Posted June 15, 2007 Posted June 15, 2007 @ cooclat, the 939 boards don't have a southbridge! <_< road-runner, can you give a close shot of the bridge mounting area with the block you're trying to put on there? Share this post Link to post Share on other sites More sharing options...
hardnrg Posted June 15, 2007 Posted June 15, 2007 @ cooclat, the 939 boards don't have a southbridge! <_< in fairness, the 939 chipset is pretty much equivalent to a southbridge, if you look at its functionality, they are pretty much identical... there is however, no northbridge chipset on a 939 motherboard Share this post Link to post Share on other sites More sharing options...
romeo55 Posted June 15, 2007 Posted June 15, 2007 in fairness, the 939 chipset is pretty much equivalent to a southbridge, if you look at its functionality, they are pretty much identical... there is however, no northbridge chipset on a 939 motherboard It's a bit of both I believe. The north bridge houses traditionally houses the memory controller, AGP/PCI-E connections, and links the south bridge to the rest of the system (Basically all the high speed connections, sort of the center of your computer) and the south bridge gets all the other lower speed stuff (SATA/IDE/PCI). But the A64 incorporates the MC into the CPU itself, so I believe the chipset in an A64 system is a... Nosuth bridge? Share this post Link to post Share on other sites More sharing options...
kingdingeling Posted June 15, 2007 Posted June 15, 2007 Same thing nrg My point was that the 939 boards only have one chipset, as the memory controller is included in the CPU DIE. Share this post Link to post Share on other sites More sharing options...
suchuwato Posted June 15, 2007 Posted June 15, 2007 My chipset (insert other name for it here if you like ) can get up to about 50*c when i'm pushing it... that's with a stock h/s though, as the graphicxs card gets in the way of anything large Share this post Link to post Share on other sites More sharing options...
Recommended Posts
Please sign in to comment
You will be able to leave a comment after signing in
Sign In Now