danieljury3 Posted October 28, 2010 Posted October 28, 2010 Just cleaned the dust out of my computer. I didn't think to take any before and after pictures or temperatures but the last time I looked at my CPU temperatures I was idling at 45oC but now I'm at 33oC. The rest of my family can't understand why I brought a can of compressed air to clean my computer with instead of using a vacuum cleaner or an air compressor. Time to run a stress teat to check load temperatures. Share this post Link to post Share on other sites More sharing options...
Andrewr05 Posted October 28, 2010 Posted October 28, 2010 Last time I cleaned mine I went down about 10 degrees also. Share this post Link to post Share on other sites More sharing options...
danieljury3 Posted October 28, 2010 Posted October 28, 2010 Stress testing results: 45oC under load. I should overclock it some more Share this post Link to post Share on other sites More sharing options...
Nyt Posted October 28, 2010 Posted October 28, 2010 Yeah , dust causes quite a lot of heat to build up and its good to clean it out once in a while. Share this post Link to post Share on other sites More sharing options...
IVIYTH0S Posted October 28, 2010 Posted October 28, 2010 Stress testing results: 45oC under load. I should overclock it some more +1 definitely try and take the 620 higher than I could get my cousins! Share this post Link to post Share on other sites More sharing options...
danieljury3 Posted October 29, 2010 Posted October 29, 2010 How high did you get your cousins? Share this post Link to post Share on other sites More sharing options...
IVIYTH0S Posted October 29, 2010 Posted October 29, 2010 How high did you get your cousins? 3.4ghz, I'm actually on it now! Not bad for a $60 chip and a $55 motherboard Can't get a drop over this though Share this post Link to post Share on other sites More sharing options...
Drdeath Posted October 29, 2010 Posted October 29, 2010 Now clean your bedromm damn it. Share this post Link to post Share on other sites More sharing options...
danieljury3 Posted October 29, 2010 Posted October 29, 2010 Cant get it stable at 3.38ghz. I think the problem is my motherboard doesn't like the FSB being over 250mhz. The reason I think this is the case is the complete lack of consistency in the type of blue screens I'm getting, it still crashes after I increase the CPU voltage from 1.3250V to 1.5000V and because it still crashed when I underclocked the CPU (I underclocked everything else before I began) Share this post Link to post Share on other sites More sharing options...
danieljury3 Posted October 29, 2010 Posted October 29, 2010 (edited) I think I might have a way to get round the FSB limitations. I seem to recall that advanced clock calibration had an option to adjust the speed of the entire CPU or individual cores by up to +/-12% Also, as Ive never tried it, is there any benefit to overclocking my Hypertransport link? Edit: ACC doesn't change the speed reported by any program I have Edited October 29, 2010 by danieljury3 Share this post Link to post Share on other sites More sharing options...
joel.monteiro Posted October 29, 2010 Posted October 29, 2010 i also cleaned my pc a month ago,cpu temp dint change,vid card dint change too ,the only temp that changed was my HDD temp went from a 39 to 32. Share this post Link to post Share on other sites More sharing options...
IVIYTH0S Posted October 29, 2010 Posted October 29, 2010 I think I might have a way to get round the FSB limitations. I seem to recall that advanced clock calibration had an option to adjust the speed of the entire CPU or individual cores by up to +/-12% Also, as Ive never tried it, is there any benefit to overclocking my Hypertransport link? Edit: ACC doesn't change the speed reported by any program I have Can you list all your voltages and settings??? Have you been lowering your memory divider so your memory isn't running too high?? Share this post Link to post Share on other sites More sharing options...
Recommended Posts
Please sign in to comment
You will be able to leave a comment after signing in
Sign In Now