2010 OCC update feedback thread

[paulktreg]

I'm using Firefox but they're still not quite right in Chrome. I like to see them lined up exactly, a minor point I know, but it does look better.

[Praz]

As asked above is there a workaround for the following text? Before the upgrade text boxes had both horizontal and vertical scrolling.

 

 

[b][color="Red"]Configure System Performance Settings[/color][/b]

[b]----------------------------------------------------------[/b]

[i]Target CPU Frequency:. 3999MHz[/i]
[i]Target DRAM Frequency: 1376MHz[/i]

[i]You can OC based om "OC From CPU Level Up"[/i]
OC Tuner Utility
AI Overclock Tuner ..................[Manual]
[i]OC From CPU Level Up.................[Auto][/i]
CPU Ratio............................[15.5]
CPU Bus Frequency....................[258]
PCIE Frequency.......................[100]
DRAM Frequency.......................[1376MHz]
CPU/NB Frequency.....................[2580MHz]
HT Link Speed........................[2580MHz]
> DRAM Timing Configuration
> DRAM Driving Configuration
[b]************* Please key in numbers directly! *************[/b]
CPU & NB Voltage Mode................[Offset]
  CPU Offset Sign....................[+]
  CPU Offset Voltage.................[i]1.488[/i] [0.121875]
  CPU/NB Offset Sign.................[+]
  CPU/NB Offset Voltage..............[i]1.262[/i] [0.062500]
CPU VDDA Voltage.....................[i]2.487[/i] [Auto]
DRAM Voltage.........................[i]1.643[/i] [1.65000]
HT Voltage...........................[i]1.228[/i] [1.23125]
NB Voltage...........................[i]1.284[/i] [Auto]
NB 1.8V Voltage......................[i]1.800[/i] [Auto]
SB Voltage...........................[i]1.100[/i] [Auto]
SidePort Memory Voltage..............[i]1.500[/i] [Auto]
[b]**********************************************************[/b]
CPU Load-Line Calibration............[Auto]
CPU/NB Load-Line Calibration.........[Auto]
CPU Spread Spectrum..................[Auto]
PCIE Spread Spectrum.................[Auto]
[b]******************** GFX Overclocking ********************[/b]
Internal Graphics Mode...............[uMA+SIDEPORT]
  UMA Frame Buffer Size..............[Auto]
  SIDEPORT Clock Speed...............[DDR3-1333MHz]
GFX Engine Clock Override............[Disabled]


[color="Red"]DRAM Timing Configuration[/color]

DRAM CAS# Latency....................7 [7 CLK]
DRAM RAS# to CAS# Delay..............7 [7 CLK]
DRAM RAS# PRE Time...................7 [7 CLK]
DRAM RAS# ACT Time..................21 [21 CLK]
DRAM READ to PRE Time................4 [Auto]
DRAM Row Cycle Time.................28 [28 CLK]
DRAM WRITE Recovery Time.............8 [Auto]
DRAM RAS# to RAS# Delay..............4 [Auto]

DRAM READ To WRITE Delay.............7 [Auto]
DRAM WRITE To READ Delay(DD).........2 [Auto]
DRAM WRITE To READ Delay(SD).........4 [Auto]
DRAM WRITE To WRITE Timing...........4 [Auto]
DRAM READ To READ Timing.............3 [Auto]
DRAM REF Cycle Time................110 [Auto]
DRAM Refresh Rate..................7.8 [Auto]
DRAM Command Rate...................1T [1T]


[color="Red"]DRAM Driving Configuration[/color]

[i]DCTO Information:[/i]
CKE drive strength................1.5X [Auto]
CS/ODT drive strength.............1.5X [Auto]
ADDR/CMD drive strength...........1.5X [Auto]
MEMCLK drive strength.............1.5X [Auto]
Data drive strength.................1X [Auto]
DQS drive strength..................1X [Auto]
Processor ODT...................60ohms [Auto]
[i]DCTO Information:[/i]
CKE drive strength................1.5X [Auto]
CS/ODT drive strength.............1.5X [Auto]
ADDR/CMD drive strength...........1.5X [Auto]
MEMCLK drive strength.............1.5X [Auto]
Data drive strength.................1X [Auto]
DQS drive strength..................1X [Auto]
Processor ODT...................60ohms [Auto]


[b][color="Red"]CPU Configuration[/color][/b]

[i]AGESA Version 3.5.4.0[/i]

----------------------------------------------------------

[i]AMD Phenom(tm) II X4 B50 Processor
Revision: C3
Cache L1: 512KB
Cache L2: 2048KB
Cache L3: 6MB
Speed   : 4012MHz,       NB Clk: 2000MHz
uCode Patch Level:       0x10000B6[/i]

----------------------------------------------------------

Microcode Updation..................[Enabled]
Secure Virtual Machine Mode.........[Enabled]
Cool'n'Quite........................[Disabled]
ASUS Core Unlocker..................[Enabled]
  Active CPU Cores..................[4 Core Operation]
C1E Support.........................[Disabled]


[b][color="Red"]DRAM Controller Configuration[/color][/b]

----------------------------------------------------------

Channel Interleaving................[XOR of Address Bit]
MemClk Tristate C3/ATLVID...........[Disabled]
Memory Hole Remapping...............[Enabled]
DCT Unganged Mode...................[Always]
Power Down Enable...................[Disabled]
[/Code]

[Praz]

Posting itself also appears to be broke. Post are limited to I think 10 images. So any posts that have more then that need to be broke down into multiple posts. But with this upgrade it appears that a person cannot make multiple posts without someone else having posted between them. Otherwise the second post is combined with the first.

[sdy284]

Posting itself also appears to be broke. Post are limited to I think 10 images. So any posts that have more then that need to be broke down into multiple posts. But with this upgrade it appears that a person cannot make multiple posts without someone else having posted between them. Otherwise the second post is combined with the first.

the old forums were like that as well

 

and you just proved the red part wrong by posting twice in a row

[ClayMeow]

the old forums were like that as well

 

and you just proved the red part wrong by posting twice in a row

 

There is a "time frame" for double-posting that will auto-combine posts. Maybe sdy or Dave can tell us exactly what the time is?

[sdy284]

15mins is the current setting

[ClayMeow]

15mins is the current setting

 

Thanks! I don't care what everyone says about you, you're a cool guy

[Praz]

Thanks for the info but the older version did not have a 15 minute time limit set. My previous motherboard threads are proof of that as I submitted one post right after the other in each of the threads. Guess I will not be posting any more of them though.

[ClayMeow]

Thanks for the info but the older version did not have a 15 minute time limit set. My previous motherboard threads are proof of that as I submitted one post right after the other in each of the threads. Guess I will not be posting any more of them though.

 

Wow, really? You can't wait 15 minutes?

 

Scott, we need a waaaaambulance emoticon

[sdy284]

Thanks for the info but the older version did not have a 15 minute time limit set. My previous motherboard threads are proof of that as I submitted one post right after the other in each of the threads. Guess I will not be posting any more of them though.

I was talking about the image limit and then separately about the time limit part.

 

After creating on of your mobo threads. Close the topic so nobody can post. wait 15 minutes. come back, unlock topic & post your next post

[Bosco]

That seems like an awful lot of work. People that are not mods can't do that. So I think turning it off completely is a better idea.

[sdy284]

That seems like an awful lot of work. People that are not mods can't do that. So I think turning it off completely is a better idea.

done