GPU-Z (Current Version: 0.2.1)

[taowulf]

http://www.techpowerup.com/gpuz/d535e/

 

Thanks for the link.

[ReelFiles]

Updated first post with link to v0.1.3

[red930]

Finally a version that works with my Nvidia cards.

The original version only worked with my ATI 3850 card.

 

Bill

[Guest r3d c0m3t]

My new validation complete with overclock, and it's about time because the previous version I was using caused the screen to black out when I opened it while ATI Tool was running.

 

http://www.techpowerup.com/gpuz/56sbq/

[Guest r3d c0m3t]

New validation with 3870.

 

http://www.techpowerup.com/gpuz/cdx5u/

 

Overclocked. :nod:

 

http://www.techpowerup.com/gpuz/mhpnw/

[RubberDuck]

There is a version out --> v0.1.5 <--

• Online BIOS submission dupecheck now actually works
  
• More changes to G70/G71 ROP/shader detection code (never ending story)
  
• G71 AGP is now 90nm instead of 110nm
  
• If default clocks on NVIDIA can not be determined via BIOS, try fallback via driver
  
• Better driver communication to NVIDIA driver
  
• Corrected shader detection for softmodded R300, R480 cards
  
• Known issue: NVIDIA SLI status can not be detected under Vista
  

[red930]

Revision History

0.1.7

Corrected several GeForce 9600 GT readings

Switched GPU and PCB temperature readings on ATI cards when using LM63 sensor

Some fields on the main screen will now show grey "unknown" instead of "0" when value unknown

Fixed HD 2900 GT ROP and shader count

Added HD 3850 AGP detection

Added 8400 GS detection

Fixed shader count on modded/unmodded R420 cards

Added Rage LT Pro detection

Fixed RS300 vertex shader count

 

 

NOW......I have two systems running the latest Intel Processors along with nVIDIA's 8800 series graphic cards (GT and GTS 320) that have problems with GPU-Z. I double click the application, see the glass bar on the cursor than disappears, nothing loads. I look into the processes and see GPU-Z running. I have ended the process for GPU-Z and have tried running it again, same thing nothing. Sometimes though i can still use the OS after running GPU-Z without it loading but will only last a short period of time (less than a minute) before the system becomes unstable than freeze, can't even shutdown or reboot. Now on my other AMD Opteron system with an X1950XTX graphic card it works everytime like a charm. I have the same Anti-Spyware/Virus/Firewall applications running on all three systems. One Intel system is running SP3 RC2 3311 and the other two are running SP2, but doesn't really matter obviously. Not sure what the #&%^ is going on but this is starting to #$%^in' piss me off. From the first version to the lastest same #$%^ over and over again. WTF?

[RubberDuck]

Get It Here --> http://www.techpowerup.com/downloads/1058/...U-Z_v0.2.0.html <--

 

Revision History - 0.2.0

• Added support for S3 graphics cards
  
• Added screenshot upload feature (press F5 or click the camera icon)
  
• Added NVIDIA GT200 detection
  
• Updated RV770 detection
  
• Vista64 is now listed as "Vista64" in the driver version readout
  
• On Vista64, CrossFire status will be marked as "Unknown" until fix is found
  
• Added dump to XML. Use command line parameter -dump gpuz.xml
  
• More robust NVIDIA clock detection
  
• Fixed G73 fillrate calculation
  
• Added die size for RV350
  
• Fixed R680 clock readings
  
• Fixed R600 ROM reading code
  
• Fixed sensors not refreshing properly sometimes
  
• When unknown architecture detected, NVIDIA logo won't be shown anymore
  
• Fixed random UNICODE characters on some architectures in upload progress
  

[wevsspot]

Nice.

 

Thanks RD!

[Branjo]

Clicked and got, thanks dude

[radodrill]

Why not post this in your old GPU-Z thread

[ReelFiles]

Threads merged, please use the same thread for the same topic.

 

v0.2.1 out updated first post.

 

Fixed Vista32 / Vista64 detection. It was reversed in 0.2.0.