sailindawg Posted April 19, 2007 Posted April 19, 2007 Just got it installed,fired it up and I'm already 10 degrees lower at idle than the lapped big typhoon i had 24-25 versus 34-35.this is on the default setting of medium. Ambient is 21c. So far so good. What are your Orthos/dual P-95 full load temps? Share this post Link to post Share on other sites More sharing options...
catkicker Posted April 19, 2007 Posted April 19, 2007 Might I ask why you are selling it? As much as I like the freezone I need some cash for some other equipment. This will not be the last freezone I own. Share this post Link to post Share on other sites More sharing options...
Prospector Posted April 19, 2007 Posted April 19, 2007 Right now running Orthos blend 356x9 1.38 vcore temps seem to be holding right around 50-52c.I'm using Speedfan calibrated with TAT.Unit is set on high. Share this post Link to post Share on other sites More sharing options...
BuddTX Posted April 21, 2007 Posted April 21, 2007 Right now running Orthos blend 356x9 1.38 vcore temps seem to be holdingright around 50-52c.I'm using Speedfan calibrated with TAT.Unit is set on high. Do you think that 50-50c is a little high? At full load, I run 52-55c with my thermalright SI-128. I was looking to get this so that my temps would get lower than what I am presently getting/ Share this post Link to post Share on other sites More sharing options...
Guest r3d c0m3t Posted April 23, 2007 Posted April 23, 2007 I was playing around with this new camera I got, and I was able to get one really good picture out so far... ...Not bad for a 2.1 MP camera, huh? :tooth: Share this post Link to post Share on other sites More sharing options...
Prospector Posted April 24, 2007 Posted April 24, 2007 Do you think that 50-50c is a little high? At full load, I run 52-55c with my thermalright SI-128. I was looking to get this so that my temps would get lower than what I am presently getting/ 60 is ok for C2D as they run hotter than AMD.I just replaced the TIM with Arctic Silver5 to see if it makes any difference.I also like it since I don't have to remove the motherboard to swap out cpus. Share this post Link to post Share on other sites More sharing options...
sailindawg Posted April 24, 2007 Posted April 24, 2007 @ Prospector, (not trying to hijack the thread) Why don't you try some Shin-Etsu instead of the AS5. From what I have read about Shin-Etsu, it out performs the AS5 by a few degrees. It could help drop your temps by a few more degrees. I have also read that it lasts much longer than AS5 over time once you get your heatsink mounted well. Share this post Link to post Share on other sites More sharing options...
Prospector Posted May 25, 2007 Posted May 25, 2007 Finally got my Eliminator back from RMA.It took 16 days.Just fired it back up. Ran Orthos for 3 hours-50 52c load.Idles 26-27 per TAT. Share this post Link to post Share on other sites More sharing options...
Thraxz Posted May 25, 2007 Posted May 25, 2007 It would seem that these literally live and die by the ambients. My 165 never touched higher than 52... even when I pumped 1.6v, ran 3.1GHz+ and had some crazy 25+C ambients. That was on water though. Share this post Link to post Share on other sites More sharing options...
Recommended Posts
Please sign in to comment
You will be able to leave a comment after signing in
Sign In Now