Jump to content

Best Heat Sink


Mindriot

Recommended Posts

I need to find the best Heatsink out there for my new MOBO which is the Gigabyte GA-7nnXPV. One thing I should note is the Board doesnot have much room for a big Heatsink. As you can see from the link of the board below.

 

GA-7NNXP

 

I should also mention this board has dual power, which I'm going to assume is going to add some unwanted heat. Grant it it has it's own fan, but it's really close to the CPU Socket.

 

Noise level is not an issue for me. I don't really care how loud my box is (that's what headphones are for ;) ). I just need a good cooling heatsink. I've already burnt 2 Athlon XP 2400+ chips. And I'm looking to avoid further burn out. I've been using the stock AMD Box Heatsink. They are obviously not up to snuff.

 

Here is what my temperatures were running at Idle with old GA-7avXP board:

Case temp- 41 degrees

CPU temp- 56 degrees (oof!)

 

Thanks

Share this post


Link to post
Share on other sites

Just find a smaller heatsink (like a Volcano), and slap a bigass 92mm Vantec Tornado fan on it. Just be sure that you're really not worried about noise first, because they're ~50db.

Share this post


Link to post
Share on other sites

The SP-94 will not fit on his motherboard. You darned P4 guys thinking that we're all like you.

 

Get the SLK-900A. The guys at Thermalright have yet to find a motherboard it doesn't fit on, and it's performance is far above and beyond the call of duty. Get a 92mm Tornado to go with it and you're set.

 

Unfortunately, I don't have one of these (YET!), but you'd better believe I'll be getting one, and throwing out my opinion of it compared to my Volcano 11.

 

Trios

Share this post


Link to post
Share on other sites

im not sure, but if i were you id get a thermalright 947u, they are large VERTICALLY on the mobo, and looks like you have plenty of space that way. thats the best heatsink on the market at the time its just rather large. if for some reason that wouldnt fit then i would get a coolermaster hhc-001

Share this post


Link to post
Share on other sites

I have no mounting holes for the bracket. I think I see a retention clip for the SLK-947U in the packaging for standard mounting on 462 Socket. Am I right on that ? I just want to be sure.

Edited by Mindriot

Share this post


Link to post
Share on other sites

The SP-94 will not fit on his motherboard. You darned P4 guys thinking that we're all like you.

 

Get the SLK-900A. The guys at Thermalright have yet to find a motherboard it doesn't fit on, and it's performance is far above and beyond the call of duty. Get a 92mm Tornado to go with it and you're set.

 

Unfortunately, I don't have one of these (YET!), but you'd better believe I'll be getting one, and throwing out my opinion of it compared to my Volcano 11.

 

Trios

:withstupid: get the slk900a with a tornado load temps at 39c in an 80 degree room.

Share this post


Link to post
Share on other sites

Please sign in to comment

You will be able to leave a comment after signing in



Sign In Now
×
×
  • Create New...