smolt Posted November 16, 2005 Posted November 16, 2005 one thing i should note is that i have tried using Auto for most of the memory settings with the 704-2 bigtoe BIOS (which is my current BIOS)http://personal.cmich.edu/~jenki1km/2700mhz.GIF Hmmmm shouldent you turn your LTD/FSB 3x be turned to 2.5 or even 2 as you get to 2.8 :confused: Share this post Link to post Share on other sites More sharing options...
gbomb944 Posted November 16, 2005 Posted November 16, 2005 multi(0)disk(0)rdisk(0)partition(2)WINDOWS="execute" /execute /fastdetect Right click my computer and go to advanced-startup and recovery manually edit your boot.ini. Copy this under the operating systems list, then "save as" change to all files and name boot.ini. You can boot regularly still also so it wont hurt anything unless you mess up editing the boot.ini. Don't replace the regular winxp entry just enter to make a new line and paste. Where it says partition 2 above change that to partition 1 if your windows is c drive, mine is d. It may not be that though since I can run 280 on regular xp. It turns off data execution prevention. I couldn't use a 9x multi until I did this. The system would just hang right before boot. BTw you can totally hose up your windoze if you don't do this right. As long as you don't delete the normal winxp entry from the list though you will be fine. Share this post Link to post Share on other sites More sharing options...
Guest laydback Posted November 16, 2005 Posted November 16, 2005 I guess I cant post in the ocdb, I just read you have to leave it running for 8 hours and I stopped it at 6, doh! Share this post Link to post Share on other sites More sharing options...
tatts Posted November 16, 2005 Posted November 16, 2005 you have to use prime95 anyway Share this post Link to post Share on other sites More sharing options...
Guest laydback Posted November 16, 2005 Posted November 16, 2005 Oh well, there's no difference Share this post Link to post Share on other sites More sharing options...
tatts Posted November 16, 2005 Posted November 16, 2005 i know there isnt any difference between them but some people argue different i only use occt & sp2004, prime messes my net up big time & refuse to use it which is why i havnt put my opty 146 in @ 3.2ghz Share this post Link to post Share on other sites More sharing options...
Namtaru Posted November 16, 2005 Posted November 16, 2005 Hmmmm shouldent you turn your LTD/FSB 3x be turned to 2.5 or even 2 as you get to 2.8 :confused: Still didn't help, now its randomly not letting me in at 2.7GHz :confused: Share this post Link to post Share on other sites More sharing options...
magnuspah Posted November 16, 2005 Posted November 16, 2005 Weird, same thing is happening with mine. It is rock solid at 3036 at 1.54V. At that settings it is prime stable for 12hrs+ and cool (load is 42C). Now, if I even increase the FSB from 276 to 277 (3049Mhz), prime95 will crash instantly. Increasing the vcore to 1.70V will not help. I would think that it would run a little and crash but nope, crash instantly once I turn prime on. I have tested the memory and it will go past 290Mhz. Even then, I have tried to use dividers, no help. It is either the Opty or the motherboard. Share this post Link to post Share on other sites More sharing options...
Namtaru Posted November 16, 2005 Posted November 16, 2005 Weird, same thing is happening with mine. It is rock solid at 3036 at 1.54V. At that settings it is prime stable for 12hrs+ and cool (load is 42C). Now, if I even increase the FSB from 276 to 277 (3049Mhz), prime95 will crash instantly. Increasing the vcore to 1.70V will not help.I would think that it would run a little and crash but nope, crash instantly once I turn prime on. I have tested the memory and it will go past 290Mhz. Even then, I have tried to use dividers, no help. It is either the Opty or the motherboard. I can't even get into windows with the extra 1MHz Share this post Link to post Share on other sites More sharing options...
ixtapalapaquetl Posted November 16, 2005 Posted November 16, 2005 @magnupah and Namtaru What are your MAL and Read Preamble set to in BIOS? Share this post Link to post Share on other sites More sharing options...
ViperJohn Posted November 16, 2005 Posted November 16, 2005 Just received the 148 Opteron OEM I ordered from Monarch on 11/10/05. It is a CAB2E 540. Viper Share this post Link to post Share on other sites More sharing options...
tatts Posted November 16, 2005 Posted November 16, 2005 heres one i made earlier, not bad for a 7800gt (cant wait for a 512mb gtx) will try 3.2ghz+ tomorrow Share this post Link to post Share on other sites More sharing options...
Recommended Posts
Please sign in to comment
You will be able to leave a comment after signing in
Sign In Now