Jump to content

smolt

Members
  • Content count

    3,273
  • Joined

  • Last visited

Everything posted by smolt

  1. Ok what I have so far : Corsair HX 1000watt PSU Intel Core 2 Quad Q9550 Yorkfield 2.83GHz 12MB L2 Cache LGA 775 95W Quad-Core Processor 2 X XFX PVT98UZHF9 GeForce 9800 GX2 1GB (512MB per GPU) 512-bit (256-bit per GPU) GDDR3 PCI Express 2.0 x16 HDCP Ready in SLI 2x 64gb OCZ Core Series SATA II 2.5" SSD in raid 0 Lian-Li PC-60FB Mid Tower Case - Black 3007WFP-HC monitor native resolution of 2560x1600 OK Need input here guys I'm thinking on getting the: OCZ Flex XLC 2GB (2 x 1GB) 240-Pin DDR2 SDRAM DDR2 1200 (PC2 9600) But some say that it wont keep up with the DDR3 on the video cards? Now what Board? I'm going DFI unless the pros tell me I'm wrong. But better be good DFI LANPARTY LT X48-T3RS LGA 775 Intel X48 DFI LANPARTY LT X48-T2R LGA 775 Intel X48 DFI LANPARTY UT X48-T2R LGA 775 Intel X48 I haven't done the home work so i don't know the difference between the three or the different between LT OR UT Just Accessories ? AND what cooling for CPU ?
  2. smolt

    New Cable Management

    Yeap it works. Im in the nearing of a mod lain-Li stay tuned as its going to be very nice. The wire management make my other look sick
  3. smolt

    4870x2 On Sale For 412 Dollars!

    and your saling that card for ?
  4. No joy. that crashes the stable settings in 3 mins of occt
  5. Ok update I went with the 2x2gb ocz PC3 14400 (oczrpr18004gk) For ram So far its stable at 3680 and cant seam to get past that My settings as fallows CPU Feature Page Thermal Management Control...........Disabled PPM (EIST) Mode...........................Disabled Limit CPUID MaxVal.........................Disabled CIE Function.................................Disabled Virtualization Technology.................Disabled Core Multi-Processing......................Enabled Main BIOS Page Exist Setup Shutdown......................Mode 2 Shutdown After AC Loss...................Disabled O. C. Fail Retry Counter...................0 CLOCK VC0 Divider..........................Auto CPU Clock Ratio..............................8.5x CPU N/2 Ratio................................Disabled CPU Clock.....................................433 MHz @3680MHz Boot Up Clock................................Auto CPU Clock Amplitude.......................800mV CPU Clock0 Skew............................0ps CPU Clock0 Skew............................0ps DRAM Speed..................................400/1333 PCIE Clock....................................100MHz PCIE Slot Config.............................1X 1X CPU Spread Spectrum.......................Disabled PCIE Spread Spectrum......................Disabled SATA Spread Spectrum.....................Disabled Voltage Setting Page CPU VID Control...............................1.3125V CPU VID Special Add Limit..................Enabled CPU VID Special Add.........................Auto DRAM Voltage Control.......................1.894V SB Core/CPU PLL Voltage...................1.510V NB Core Voltage...............................1.630V CPU VTT Voltage..............................1.325V VCore Droop Control..........................Disabled Clockgen Voltage Control...................3.45V GTL+ Buffers Strength.......................Strong Host Slew Rate................................Weak GTL REF Voltage Control....................Disabled CPU GTL 1/2 REF Volt........................113 CPU GTL 0/3 REF Volt........................100 North Bridge GTL REF Volt .................100 DRAM Timing Page Enhance Data Transmitting.................Fast Enhance Addressing..........................Fast T2 Dispatch....................................Disabl ed Clock Setting Fine Delay....................Listed Below CAS Latency Time (tCL)....................7 RAS# to CAS# Delay (tRCD)...............6 RAS# Precharge (tRP).......................6 Precharge Delay (tRAS).....................24 All Precharge to Act.........................Auto REF to ACT Delay (tRFC)...................Auto Performance Level............................9 Read Delay Phase Adjust...................Listed Below MCH ODT Latency............................Auto Write to PRE Delay (tWR)..................Auto Rank Write to Read (tWTR)................Auto ACT to ACT Delay (tRRD)...................Auto Read to Write Delay (tRDWR)..............Auto Ranks Write to Write (tWRWR)............Auto Ranks Read to Read (tRDRD)...............Auto Ranks Write to Read (tWRRD)..............Auto Read CAS# Precharge (tRTP)..............Auto ALL PRE to Refresh............................Auto Read Delay Phase Adjust Page Channel 1 Phase 0 Pull-In.................Enabled Channel 1 Phase 1 Pull-In.................Enabled Channel 1 Phase 2 Pull-In.................Enabled Channel 1 Phase 3 Pull-In.................Enabled Channel 1 Phase 4 Pull-In.................Enabled Channel 2 Phase 0 Pull-In.................Auto Channel 2 Phase 1 Pull-In.................Auto Channel 2 Phase 2 Pull-In.................Auto Channel 2 Phase 3 Pull-In.................Auto Channel 2 Phase 4 Pull-In.................Auto Clock Setting Fine Delay Page DRAM Clk Driving Strength...................Level 3 DRAM Data Driving Strength.................Level 8 Ch1 DLL Default Skew Model................Model 6 Ch2 DLL Default Skew Model................Model 6 Fine Delay Step Degree....................5ps Ch1 Clock Crossing Setting................Auto DIMM 1 Clock fine delay...................Current DIMM 2 Clock fine delay...................Current DIMM 1 Control fine delay.................Current DIMM 2 Control fine delay.................Current Ch 1 Command fine delay..................Current Ch2 Clock Crossing Setting................Auto DIMM 3 Clock fine delay...................Current DIMM 4 Clock fine delay...................Current DIMM 3 Control fine delay.................Current DIMM 4 Control fine delay.................Current Ch 2 Command fine delay..................Current Ch1Ch2 CommonClock Setting............Auto Any ideas?
  6. smolt

    New Cable Management

    Well thats a start but end the end your looking for this
  7. thank you Praz Ok i went with the 2 x 2GB OCZ Reaper 1800
  8. Ok i Need to get ram ordered I need help here Praz OCZ rep How bout some help here ?
  9. Ok so far this is the setup DFI LP UT x48T3RS Intel Core 2 Quad Q9550 Yorkfield 2.83GHz 12MB L2 Cache LGA 775 95W Quad-Core Processor 120 extreme black Air cooling 2 Asus 4870X2 2 X OCZ Core Series SATA 11 2.5
  10. Ok looks like im gonna go wih the DFI LANPARTY LT X48-T3RS LGA 775 Intel X48 And change my ram to DDR3 NEED input on ram and use one XFX PVT98UZHF9 GeForce 9800 GX2 1GB (512MB per GPU) 512-bit (256-bit per GPU) GDDR3 PCI Express 2.0 x16 HDCP Ready SLI
  11. Grate call man hmmm now what I can use just one of them right? How about the LANPARTY UT P35-T2R will it do SLI?
  12. smolt

    Wtb

    Hi guys Looking to buy your used Racing wheel you just don't use anymore. What you have laying around ?
  13. smolt

    Which 2 Of 3?

    Stalker ,Bioshock and COD4 is grate. Crysis was such a disappointment to me it lasted 2 weeks. Now you might like LIVE FOR SPEED for a real hooker:D
  14. smolt

    Greetings!

    welcome to OCC
  15. smolt

    Hi All @ Occ

    Hi and welcome to OCC
  16. Hey Wetsonte nice o see you again I just upgraded to them drivers last week and I'm having problems too with them seams the drivers stopped all use of my web cam and can only get the cam back if i remove the new drivers. Somthing to do with the WD? install
  17. smolt

    Unexplained crashes

    well looking as that you have been using your PC and now it seams to have some problems without doing anything to it If i read your post right It would appear to me as a corrupted OS. If your memory passes memtest ( now mind you every time you pull your memory Out of the board it will take 8 hrs to stable ) I would try a repair on the OS as by now its sure to have problems
  18. smolt

    Unexplained crashes

    Whats the stock setting that's printed on your corsair? As 2.5-4-4-8 is way to lose for stock no clock settings for most corsair and will cause you such problems also 2.75v 0r 2.8 on your corsair is were you wont to be. and in slots 2 & 4
  19. WHAT before doing so. you might wont to read whats being said about the nf4 sli-d expert and TccD getting along. And that there's a good chance that you will have to run T2 ( not that there's a problem with that) And much lower memory MHz running 4 sticks .You Might be better off selling your corsair and getting 2x1 gig sticks Of Corsair
  20. smolt

    Clever Boffins!!!

    the first post From Cambridge University only its a long version
  21. smolt

    Clever Boffins!!!

    haha well I really wish I had a answer to that. But someone ant Man enough to say.broadcast ( probably spelled wrong ) shown on TV
  22. smolt

    Clever Boffins!!!

    It is broad casted here on TV every day in NL nope the brain only see the first letter and the last letter. it does not read every letter so all the little crybabies here that complain about spelling. to know. so they can feel superere or better then everyone else. And try to belittle someone for not being able to type 100wpm to try and make themselves look better. Wo Hooow. that don't impress me much
×