Jump to content

dinos22

Members
  • Content count

    190
  • Joined

  • Last visited

About dinos22

  • Rank
    Member

Contact Methods

  1. well you can calculate where you should be at.............just search the forumulae i used at the beginning of this thread............but i can tell you right now that i was estimating up to 20C difference.......I would say you are loading at those temps....~60C which is pretty high and you should back down in vcore and MHz for 24/7
  2. non-DFI board heheheh it's also good to know the difference between two cores.....and if one crapping out in priming is due to temps or something else....... DFI bios upgrade possible to read this sensor....? Just a thought
  3. looks like there's a breakthrough in actual CPU core temp readings from CPU's sensor rather than mobo one.........................here is a thread over at XS with all the info.........sorry if posted already http://www.xtremesystems.org/forums/showthread.php?t=103639
  4. dinos22

    Unofficial Opteron 939 Thread

    it's all in this thread......just a bunch of pages back
  5. dinos22

    Unofficial Opteron 939 Thread

    Opteron 146 with 11x multi
  6. dinos22

    7900GT = just a lower-clocked 7900GTX?

    they sure are nice GFX cards............best bang for bux it seems i don't think they are the same cards as GTX. GTXs are the higher speed binned cards......judging from OCing results with Volt mods (GTX has std 1.4vcore and GT has something like 1.2x vcore) GTX are just slighly better when compared head to head also GTX cards are sold with BL11/12 RAM which is speed binned higher and will reach higher frequencies obviously the cooling differs as well between the two cards BUT these are all minor things as there is really not a hell of a lot in it between the two......good review
  7. dinos22

    Unofficial Opteron 939 Thread

    good work.....it's very exciting squeezing that little bit more out......it was the same for me going from 3455MHz to 3476MHz to help me dive into 20M times for 32M SuperPI....very exciting stuff :nod:
  8. dinos22

    Unofficial Opteron 939 Thread

    blazin..........pop the IHS off and you will go way past 3GHz
  9. dinos22

    Unofficial Opteron 939 Thread

    you don't need to quote all pics i've already talked about that a few pages back ...... search button is your friend
  10. dinos22

    Unofficial Opteron 939 Thread

    just played some more with the new phase unit
  11. dinos22

    Unofficial Opteron 939 Thread

    tell us about this......how did you get it all hooked up [edit] WTF is that a keyboard :eek2:
  12. dinos22

    Unofficial Opteron 939 Thread

    yeap 11xmulti unlocked CABYE 0540FPBW Opteron 146
  13. dinos22

    Unofficial Opteron 939 Thread

    3455MHz 8M SuperPI windows idle core temp = -26/-27C windows idle evap temp = -38C windows SPI 32M core load temp = -15C windows SPI 32M evap load temp = -35C 3.5Ghz http://valid.x86-secret.com/show_oc?id=80427 i did a few loops of 32M......just need to figure it out....but it looks benchable close to 3.5GHz :leet: almost 20minutes argh here is a photo of 3.5GHz 32M SuperPI run........... -12C load....need a little better temps to make it stick :nod:
  14. dinos22

    Unofficial Opteron 939 Thread

    just got the phase unit cranking and here are the results from the first night's worth of benching BIG THANKS TO C-BuZz for building this nice phase unit for me :nod: i just went straight for 3.3GHz i couldn't use 10.5xmulti to get 13/ratio for RAM hence i only have 235MHz on RAM ..................run was done with MBM5 so i can see the temps 3300MHz 32M SuperPI windows idle core temp = -28C windows idle evap temp = -40C windows SPI 32M core load temp = -16/-18C windows SPI 32M evap load temp = -36/-38C 3355MHz 8M SuperPI....heheh too late for 32M runs windows idle core temp = -26/-28C windows idle evap temp = -39C windows SPI 32M core load temp = -16/-18C windows SPI 32M evap load temp = -36/-37C 3405MHz 8M SuperPI windows idle core temp = -26/-27C windows idle evap temp = -38C windows SPI 32M core load temp = -15C windows SPI 32M evap load temp = -36C
  15. can you try memtesting with a USB floppy pls
×