isq000 Posted March 11, 2012 Posted March 11, 2012 After an advice of hard ware ect made my decision and ordered the following M.B Spec - --------------------------------------------------- Chipset:NVIDIA GeForce 7025 + nForce 630a CPU Interface:Socket AM3 Front Side Bus:2000MT/s RAM Technology:DDR3 (Dual Channel) RAM Slots:2 x 240-Pin RAM Speeds:DDR3 800‚DDR3 1066‚DDR3 1333 (O.C) Max. Memory Support:8GB Expansion Slots:1 x PCI Express x16‚2 x PCI Express x1‚1 x PCI Storage Controller(s):4 x S-ATA/300‚RAID 0‚RAID 1‚RAID 5‚RAID 10‚JBOD On-Board LAN:Realtek RTL8211CL (10/100/1000Mbit) On-Board Audio:Realtek ALC889 codec‚High Definition Audio On-Board Video:Integrated in the Chipset Back Panel I/O Ports:1 x PS/2 Keyboard‚1 x PS/2 Mouse‚1 x COM‚1 x VGA‚4 x USB 2.0‚1 x LAN‚3 x Audio Internal I/O Connectors:1 x 24-pin ATX Power‚1 x 4 pin ATX 12V Power‚1 x Front panel audio header‚3 x USB 2.0 header‚1 x Parallel port header Form Factor:Micro ATX‚244mm x 205mm Special Features:Supports @BIOS‚Supports Q-Flash‚Support for Xpress BIOS Rescue‚Supports Download Center‚Supports Xpress Install‚Supports Xpress Recovery 2 Package Contents:User Guide‚2 x S-ATA Data Leads‚Backplate‚Driver CD CPU Spec - AMD Bulldozer FX4100 3.6 ------------------------------------------------- Interface:Socket AM3+ FX 4100 3.6Ghz Bus Speed:One 2000 MHz 16-bit HyperTransport link No. of Cores:4 Core Name:Zambezi Core Frequency:3.60GHz RAM Spec - 4gb Patriot DDR3 1333 Memory ------------------------------------------------ Type:DDR3 Capacity:4GB ( 1x 4gb ) Clock Speed:1333MHz Compliance:PC3-10600 CAS Latency:9.0 Voltage:1.5V Chipset:Patriot No. of Chips:16 Pins:240 Side:Double Special Features: Non-ECC Unbuffered, 2 Rank Double-sided module, 7.8US Refresh Interval (8192 CYCLES/64MS), 1.5V Power Requirement, Auto and self refresh capability, PCB height: 1181(mil), Serial Presence-Detect (SPD), RoHS Compliant Package Contents:1 x 4GB Memory Stick ( Will get 2nd later on ) CPU Cooler - CoolerMaster Hyper 212 EVO CPU Case - CIT Vantage ATX Gaming PC Tower PSU - Corsair CMPSU-600GUK Gaming Series GS600 High Performance 600W Power Supply HDD 1 - Western Digital Caviar Blue 500GB SATAIII 6Gb/s 16MB Cache 3.5 inch Internal Hard Drive OEM SSD 1 - Corsair Force Series 3 CSSD-F60GB3A-BK 60GB Solid State Drive Video Card - Gigabyte GeForce GTX 560 Ti (1024 MB) (GVN560OC1GI) Graphics Card The rest of the hard doesn't seems to make any sense to post like cd/dvd ect rom So that for now .. as soons as ill get some stuff will start to post some pic's ect Share this post Link to post Share on other sites More sharing options...
Stonerboy779 Posted March 11, 2012 Posted March 11, 2012 I am very sorry to say your PC will not boot.... That is an AM3 board you ordered and bulldozer CPUs will only work in AM3+ sockets. 1 Share this post Link to post Share on other sites More sharing options...
Waco Posted March 11, 2012 Posted March 11, 2012 Yep. Those parts just don't work together. I'd suggest sending the mobo/CPU back and getting a lower-end Intel Sandy-Bridge build for roughly the same cost. Share this post Link to post Share on other sites More sharing options...
isq000 Posted March 12, 2012 Posted March 12, 2012 Hmm didn't notice the difference between socket's .. anyway just contacted the company.Might be they made an mistake at description if not ill send them back and get another one .. but basically the system stays the same Share this post Link to post Share on other sites More sharing options...
isq000 Posted March 12, 2012 Posted March 12, 2012 Just got the response on my message to company who sold the bundle to meh ... and it turns out to be an description mistake so all good Share this post Link to post Share on other sites More sharing options...
DanTheGamer11 Posted March 12, 2012 Posted March 12, 2012 So what's the dealio? Share this post Link to post Share on other sites More sharing options...
XtremeDS Posted March 12, 2012 Posted March 12, 2012 What board is it? I actually find a bit odd some features. I am saying this because the board only supports DDR3 1333 at O.C, only 8 GB of ram and it only has 2 slots for ram. Share this post Link to post Share on other sites More sharing options...
DanTheGamer11 Posted March 12, 2012 Posted March 12, 2012 It's probably a very cheap one... I saw a cheap mobo but it was great... for 32 pounds you could get a mobo that supports DDR2 and DDR3! Onboard IGPU and Athlon 64 and Phenom compatibility as well as Athlon II and Phenom II Share this post Link to post Share on other sites More sharing options...
isq000 Posted March 20, 2012 Posted March 20, 2012 (edited) Well the MB is Gigabyte M68MT-S2 instead of the one they have shown in picture and description .. but anyway i had to stop this little project of mines since the CPU is faulty ... damn thing were tested on an different MB and i got the same result - no Post ... gona have to wait till ill get an replacement. P.S the MB isnt the most expensive one but its not about how expensive things are ~ as long as it will work the way it suppose to either way i wont be going for a some massive O.C or more like i wont OC it at all (for now) Edited March 20, 2012 by isq000 Share this post Link to post Share on other sites More sharing options...
El_Capitan Posted March 20, 2012 Posted March 20, 2012 Heck, if you're Waco, even AM3+ boards won't work with Bulldozer. Share this post Link to post Share on other sites More sharing options...
isq000 Posted March 20, 2012 Posted March 20, 2012 Heck, if you're Waco, even AM3+ boards won't work with Bulldozer. Ok then explain why teh company does sell the bundles and even already y build up's with this MB same CPU ect ? Waco or not its no point to be rude if someone is tryn to make a build even if i am not that much experienced with this.Instead of you are an Waco ect you could give me an advice how to ?! At the same time i gave the stuff ( everything ive got - the hard ware ) to an Specialist who's is experienced enough and even he couldn't do anything with it. Like i said the CPU were tested on dif. MB and it didn't work Share this post Link to post Share on other sites More sharing options...
El_Capitan Posted March 20, 2012 Posted March 20, 2012 Ok then explain why teh company does sell the bundles and even already y build up's with this MB same CPU ect ? Waco or not its no point to be rude if someone is tryn to make a build even if i am not that much experienced with this.Instead of you are an Waco ect you could give me an advice how to ?! At the same time i gave the stuff ( everything ive got - the hard ware ) to an Specialist who's is experienced enough and even he couldn't do anything with it. Like i said the CPU were tested on dif. MB and it didn't work Don't take things personally, it's the internet. And I'm not being rude... except to Waco. Waco is pretty experienced. He had a whole thread dedicated to his FX and AM3+ upgrade that I don't think ever worked. He could probably give the best insight of what's probably going on. I think this was the thread: http://forums.overclockersclub.com/index.php?showtopic=187874&st=0 Share this post Link to post Share on other sites More sharing options...
Recommended Posts
Please sign in to comment
You will be able to leave a comment after signing in
Sign In Now