dling Posted March 9, 2010 Posted March 9, 2010 (edited) I have this cooler coming to me, and I was wondering will I be able to use two fans on it . http://benchmarkreviews.com/index.php?opti...6&Itemid=62 My memory is the Corsair Dominator which is very tall . Have any of you tried this? Edited March 9, 2010 by dling Share this post Link to post Share on other sites More sharing options...
TropicalPreist Posted March 9, 2010 Posted March 9, 2010 Is that your mobo in the sig? Share this post Link to post Share on other sites More sharing options...
minigeek Posted March 9, 2010 Posted March 9, 2010 yea, it can have the push/pull setup so you can do that for maximum cooling! as for how to mount them, idk Share this post Link to post Share on other sites More sharing options...
Coors Posted March 9, 2010 Posted March 9, 2010 (edited) MY mobo is spaced a little different I think but I had to remove the fins on the ram closest to the fan. And even then I had to do some finessing to get the fan on. edit: I have the Megashadow and the fan also doesn't sit flush on the heat sink. It sits on top of the ram even with the fin removed. But like I said my mobo is spaced different because it only has 3 ram slots. Edited March 9, 2010 by Raiderfan001 Share this post Link to post Share on other sites More sharing options...
unknownuser200 Posted March 9, 2010 Posted March 9, 2010 i have this cooler love it... you should be fine the cooler is very tall Share this post Link to post Share on other sites More sharing options...
Coors Posted March 9, 2010 Posted March 9, 2010 i have this cooler love it... you should be fine the cooler is very tall Not tall enough to clear Dominators. Share this post Link to post Share on other sites More sharing options...
unknownuser200 Posted March 9, 2010 Posted March 9, 2010 he sould have enough disttance where its not an issue even witha pushpull config... doesnt hit on my asus rampage extreme... and thats socket 775 .. ram is much closer... now if u have 38mm depth fans maybe Share this post Link to post Share on other sites More sharing options...
rourkchris Posted March 9, 2010 Posted March 9, 2010 There is a little "play" in the wire fan mounts that it can be pushed up a bit. Share this post Link to post Share on other sites More sharing options...
dling Posted March 9, 2010 Posted March 9, 2010 Thanks guys, the fans are 120x25 . I hope it works. Share this post Link to post Share on other sites More sharing options...
Hyper Posted March 9, 2010 Posted March 9, 2010 Here is mine on a P7P55D-E Prem. board. The ram is ripjaws which are a little shorter then dominators.. These are aslo 32mm fans which are basicly setting on the top of the ram.. Share this post Link to post Share on other sites More sharing options...
unknownuser200 Posted March 9, 2010 Posted March 9, 2010 as you can see in mine the cooler isnt even close Share this post Link to post Share on other sites More sharing options...
kuri Posted March 9, 2010 Posted March 9, 2010 Looks like it depends on the board layout then. Did you find the answer you need? I found this on Overclock.net, not sure if it was also you who was asking. http://www.overclock.net/8648930-post924.html Share this post Link to post Share on other sites More sharing options...
Recommended Posts
Please sign in to comment
You will be able to leave a comment after signing in
Sign In Now