Kingfisher Posted February 25, 2009 Posted February 25, 2009 They are both set to auto, Kit. Share this post Link to post Share on other sites More sharing options...
kitfit1 Posted February 25, 2009 Posted February 25, 2009 They are both set to auto, Kit. That is the nub of your problem then. As i don't run a quad myself, i can't give you a lot of help as to what to set them to. But if you head over to DFI Club and look in the overclocking database, it should give you an idea of the sort of settings you might need at the clock your running. A different mobo to yours i know, but it will be a good starting point. Share this post Link to post Share on other sites More sharing options...
Kingfisher Posted February 25, 2009 Posted February 25, 2009 (edited) That is the nub of your problem then. As i don't run a quad myself, i can't give you a lot of help as to what to set them to. But if you head over to DFI Club and look in the overclocking database, it should give you an idea of the sort of settings you might need at the clock your running. A different mobo to yours i know, but it will be a good starting point. Thanks Kitfit, you are amazing my friend. I have noticed a few threads(this is one example) over at xtreme about the VTT and GTLR. I'll take a look over at DFI club and see what I can find as well and maybe say hello to some old friends. I am going to do some homework and see if I can't this chip going. Edited February 25, 2009 by Kingfisher Share this post Link to post Share on other sites More sharing options...
Kingfisher Posted February 28, 2009 Posted February 28, 2009 quick update to my NB problems... After reading through this monster I am having very good results so far. Testing my NB voltages between 1.24 and 1.30v I am prime testing 3.85 ghz without failing inside a few minutes. I'm also fiddling with trying to keep GTL refs as close to .8 as possible and seem to be making progress. Never have had more fun clocking a chip before, love these quads. :thumbs-up: Share this post Link to post Share on other sites More sharing options...
Onion Posted March 1, 2009 Posted March 1, 2009 I'm at 1.32. Anything under makes my quad ultra unstable for some reason. Share this post Link to post Share on other sites More sharing options...
IVIYTH0S Posted March 1, 2009 Posted March 1, 2009 (edited) I run 1.4v on my NB just so I know that's not limiting me in anyway, and it deserves to since I have that rediculously huge stock copper cooler on it lol (contrary to when I ran 1.36v in those pics up there) Edited March 1, 2009 by IVIYTH0S Share this post Link to post Share on other sites More sharing options...
Kingfisher Posted March 1, 2009 Posted March 1, 2009 any of you have a stuck sensor? My #0 core is stuck at 40c but reports accurately once above that temp. I look at it like it's a special core, a feature of Intel CPUs! :thumbs-up: Share this post Link to post Share on other sites More sharing options...
IVIYTH0S Posted March 1, 2009 Posted March 1, 2009 my fourth core is always EXACTLY 5C lower than the first three which hover about dead on with each other or about 1C Share this post Link to post Share on other sites More sharing options...
Kingfisher Posted March 2, 2009 Posted March 2, 2009 Still having trouble getting to 3.85, I have been concentrating on 3.75ghz and have finally managed to pass Prime stable for another 18+ hours. I am going to take a break for a few days and then resume. I should have plenty of headroom left. 1.3v to the nb, 1.34v for vtt( board uses multi's for GTL, .65 being the best choice atm) and 1.225vcore. cpu pll is at 1.54v Temps are still around 50-51c full load. Temps likelywill become my main problem and water cooling may be the final answer if I actually think about going 24/7 with the higher clocks.(which is bordering on silly, heck I was happy with performance back @ 3.4ghz ) Still though, it is fun to see how high I can get it. :thumbs-up: Share this post Link to post Share on other sites More sharing options...
Recommended Posts
Please sign in to comment
You will be able to leave a comment after signing in
Sign In Now