reho1990 Posted August 22, 2008 Posted August 22, 2008 hi iam trying to overclock my processor to 3.0gh but i cant get past 2.8, fsb is 256 if i try to go over that when i try to start my compuet i just get a blank screen any ideas??? my motherboard is a abit-at8 32x iam new to this so i dont know why i can reach any better than 2.8 plzzzzzzzzzzz help me thx Share this post Link to post Share on other sites More sharing options...
Zertz Posted August 22, 2008 Posted August 22, 2008 (edited) Set it at a lower multiplier and out the max "FSB" it can reach so this way you can figure out if that's limiting you. Also make sure you use RAM dividers, maybe it just can't keep up with the CPU. You'll have to increase Vcore at some point too... and maybe the CPU just won't clock any higher. I know my 4200+ (AM2 though) would top out around 2.8GHz Finally, please, take a minute to proof read your posts, your spelling is awful. Edited August 22, 2008 by Zertz Share this post Link to post Share on other sites More sharing options...
Fight Game Posted August 22, 2008 Posted August 22, 2008 Set it at a lower multiplier and out the max "FSB".........................Finally, please, take a minute to proof read your posts Out wit fsb's Share this post Link to post Share on other sites More sharing options...
Zertz Posted August 22, 2008 Posted August 22, 2008 (edited) Out wit fsb's HT Reference Clock then. It was an intentional misuse of the term FSB Edited August 22, 2008 by Zertz Share this post Link to post Share on other sites More sharing options...
ccokeman Posted August 22, 2008 Posted August 22, 2008 2.8 is a pretty good clock speed for an A64. My 3800X2 got to 2870MHz prime stable. I would drop the multi and go up on the FSB. I could run in the neighbor hood of 285 with the Gskill HZ 4000 set of memory i had 3-4-3-8 Share this post Link to post Share on other sites More sharing options...
Bubbaxm2 Posted August 22, 2008 Posted August 22, 2008 Start by reading all of this. http://forums.overclockersclub.com/index.php?showtopic=80258 Share this post Link to post Share on other sites More sharing options...
reho1990 Posted August 22, 2008 Posted August 22, 2008 Set it at a lower multiplier and out the max "FSB" it can reach so this way you can figure out if that's limiting you. Also make sure you use RAM dividers, maybe it just can't keep up with the CPU. You'll have to increase Vcore at some point too... and maybe the CPU just won't clock any higher. I know my 4200+ (AM2 though) would top out around 2.8GHz Finally, please, take a minute to proof read your posts, your spelling is awful. ok i just did that with no luck i put the multiplier at 8.0 and the fsb at 260 all i got was a black screen agian ??? it seems i cant raise the fsb anymore past 256 and thx for the fast reply's Share this post Link to post Share on other sites More sharing options...
Zertz Posted August 22, 2008 Posted August 22, 2008 ok i just did that with no luck i put the multiplier at 8.0 and the fsb at 260 all i got was a black screen agian ??? it seems i cant raise the fsb anymore past 256 and thx for the fast reply's It's possible you hit a wall, 2.8GHz is still pretty good for those processors! Share this post Link to post Share on other sites More sharing options...
reho1990 Posted August 22, 2008 Posted August 22, 2008 (edited) It's possible you hit a wall, 2.8GHz is still pretty good for those processors! i would off really liked to get it at the 3.0gh mark but it seems i cant get past 2.8 i will have to stick to that then if some body has any other ideas plz let me know i will try it out right away. thx for the help Edited August 22, 2008 by reho1990 Share this post Link to post Share on other sites More sharing options...
Puck Posted August 23, 2008 Posted August 23, 2008 i would off really liked to get it at the 3.0gh mark but it seems i cant get past 2.8 i will have to stick to that then if some body has any other ideas plz let me know i will try it out right away. thx for the help Your chip is probably maxed out. My 939 Opteron did not like more then 2.9ghz stable, and could only bench at 3ghz but was not truely stable. Share this post Link to post Share on other sites More sharing options...
ccokeman Posted August 23, 2008 Posted August 23, 2008 i would off really liked to get it at the 3.0gh mark but it seems i cant get past 2.8 i will have to stick to that then if some body has any other ideas plz let me know i will try it out right away. thx for the help If you knew how many A64s i bought trying to get a 3G stable one would make you sick. Share this post Link to post Share on other sites More sharing options...
dr_bowtie Posted August 23, 2008 Posted August 23, 2008 What stepping and date code is the chip...? There were some LC*** series that didnt overclock for crap and ran hotter than hot... I have one and it wont clock 200mhz over stock stable without giving it 1.55v which is the max I would give the chip anyways... Share this post Link to post Share on other sites More sharing options...
Recommended Posts
Please sign in to comment
You will be able to leave a comment after signing in
Sign In Now