Jump to content


Photo
- - - - -

Ocz/Dfi Special DDR800 1T on U2-M2...


  • Please log in to reply
12 replies to this topic

#1 RGone

RGone

    Posting Nut

  • Members
  • PipPipPipPipPipPip
  • 6961 posts

Posted 15 September 2006 - 10:07 AM

In OczTony's thread about the Ocz/Dfi Special DDR800 1T (http://www.dfi-stree...ead.php?t=64731 ) , I made mention that I was testing on the Ultra2-M2 board and here are the preliminary results so far. One note that was of great interest to me was suddenly the 'slow' AM2 5000+ I was using went into the plus 2800Mhz range. Oh I do feel better for sure.

See Prime below and more to follow. RGone...

Posted Image

Some wanted to see the difference between 1T and 2T command rate. Here they are and though you will see less "difference" as the benches move from 3D01 to 3D06 that does NOT mean Ripping, Editting and other CPU/Memory Intensive operations will not also show similar gains with 1T instead of 2T and NO I am not going to go around the world to test the rest...you can yourself...

Everest Reads:
Posted Image

Posted Image

Aquamark3:
Posted Image

Posted Image

3D01:
Posted Image

Posted Image

1T 3D03:
Posted Image

1T 3D05:
Posted Image

1T 3D06:
Posted Image


GenieBios:
Posted Image

Dram Configuration:
Posted Image

Given the choice previous to a purchase, I would choose 1T everytime if Possible. RGone...

#2 RGone

RGone

    Posting Nut

  • Members
  • PipPipPipPipPipPip
  • 6961 posts

Posted 15 September 2006 - 10:07 AM

Although the OczPC9000 Special stuff has been checked/qualified on the DFI SLi 590 board it is d*mn goot for the DFI Ultra2-M2 board also and runs as advertised quite nicely...

3D01:
Posted Image

3D03:
Posted Image

3D05:
Posted Image

3D06:
Posted Image

Aquamark3:
Posted Image

Everest Reads:
Posted Image

Prime:
Posted Image

DramConfiguration:
Posted Image

Bios:
Posted Image

As seen Ocz/Dfi Special PC9000 works pretty darn good for me...I like it too. Hehehe.
RGone...

#3 RGone

RGone

    Posting Nut

  • Members
  • PipPipPipPipPipPip
  • 6961 posts

Posted 15 September 2006 - 10:08 AM

keeping it between the ditches...

#4 OldGuy

OldGuy

    Total Nerd

  • Members
  • PipPipPipPipPip
  • 2618 posts

Posted 15 September 2006 - 10:33 AM

Can you throw some everest read/writes into the mix por favor? Iffin ya hadn't already planned fer it o'course................

#5 Angry_Games

Angry_Games

    Honorary Member

  • Members
  • PipPipPipPipPipPipPipPipPip
  • 27999 posts

Posted 15 September 2006 - 11:25 AM

ps I would like to add that though I do not have the OCZ-DFI special RAM, I do have some great OCZ 2GB Gold GX that EASILY (and i was even surprised at how easily) dumped my 4800+ X2 AM2 up to 2900Mhz without ANY effort.

These AM2 processors are very nice for clocking from my testing so far!

hope to get my hands on some OCZ-DFI special stuff
Diablo III arrives at Angry's house:
Posted Image

#6 RGone

RGone

    Posting Nut

  • Members
  • PipPipPipPipPipPip
  • 6961 posts

Posted 15 September 2006 - 11:30 AM

"OG" will the last 'freeware' version of everest work ok? I am not paying for 'another' dang bench I don't care anything about. Hehehehee. RGone...

Can you throw some everest read/writes into the mix por favor? Iffin ya hadn't already planned fer it o'course................



#7 OldGuy

OldGuy

    Total Nerd

  • Members
  • PipPipPipPipPip
  • 2618 posts

Posted 15 September 2006 - 12:17 PM

"OG" will the last 'freeware' version of everest work ok? I am not paying for 'another' dang bench I don't care anything about. Hehehehee. RGone...


Yes sir that'll do...any little thing I can get my eyeballs on to sway me one way or the other between AM2 now or holding off for a DFI SLI/Conroe combo. I think I'll be majorly dissappointed at this point switching from what I have in my sig to AM2 other than something new to play with...

#8 marauder16

marauder16

    Member

  • Members
  • PipPip
  • 54 posts

Posted 15 September 2006 - 01:16 PM

RGone care to drop to 2T and see if these babies can hit DDR1200? I'm deciding between OCZ Plat. DDR900 or these modules basically on the chance of hitting 300MHz 1:1, I know every modules perform differently but I'd like to get the best deal...

#9 d-mart

d-mart

    New Member

  • Members
  • 15 posts

Posted 16 September 2006 - 01:04 AM

RG, which bios version you use?

#10 RGone

RGone

    Posting Nut

  • Members
  • PipPipPipPipPipPip
  • 6961 posts

Posted 16 September 2006 - 06:33 AM

711 the last official bios I have seen...RGone...

RG, which bios version you use?



#11 RGone

RGone

    Posting Nut

  • Members
  • PipPipPipPipPipPip
  • 6961 posts

Posted 17 September 2006 - 11:44 AM

OG here you go man... http://www.dfi-stree...8464#post598464

RGone...

Yes sir that'll do...any little thing I can get my eyeballs on to sway me one way or the other between AM2 now or holding off for a DFI SLI/Conroe combo. I think I'll be majorly dissappointed at this point switching from what I have in my sig to AM2 other than something new to play with...



#12 RGone

RGone

    Posting Nut

  • Members
  • PipPipPipPipPipPip
  • 6961 posts

Posted 20 September 2006 - 09:16 AM

See the test results here...not shabby at all on even the DFI Ultra2-M2 board...It sets up mighty easy as well.

http://www.dfi-stree...465&postcount=2

RGone...