MDSarcasm Posted May 6, 2006 Posted May 6, 2006 So, I just bought a DFI LanParty UT nf4 Ultra-D motherboard and tried to put my 2 sticks of generic RAM in dual-channel, which didnt work (I wasnt surprised) so I had to put them in the top 2 slots... Until I got another 256mb stick, I put that in the 3rd slot and it wouldnt boot. So I took it out, then tried to put 1 512mb stick ONLY in the 3rd slot, and it wouldnt boot I then tried the 4th, same thing...and with the other 512mb and the 256mb, both wouldnt boot... So Im wondering, what s supposed to be happening???Are my mobos slots shot? Any help appreciated. Share this post Link to post Share on other sites More sharing options...
MDSarcasm Posted May 7, 2006 Posted May 7, 2006 So noone knows..this all is pretty much pointless then eh? Share this post Link to post Share on other sites More sharing options...
Nehil Posted May 7, 2006 Posted May 7, 2006 First of all, don't use generic RAM. It's just so stupid when you have a Opteron 144 and Ultra-D made for OC. Check the manual on how to properly use Dual Channel. Share this post Link to post Share on other sites More sharing options...
supershanks Posted May 7, 2006 Posted May 7, 2006 rather than just putting memory in slots at random try reading Rgone's slots & usage if 1 module use slots furthest from cpu - dual channel = 2x same colour. Share this post Link to post Share on other sites More sharing options...
tmwnn Posted May 7, 2006 Posted May 7, 2006 hey MDSarcasm, i have a similar sit to yours, started thread couple days ago: http://www.dfi-street.com/forum/showthread.php?p=478140 this problem seems to me is not rare (there are links in the thread above). however from what i saw there is no common connection, different mobos etc... try to check other ram sticks to rull on the ones you got, i'm gonna borrow. if not the ram it's either the cpu (mem controller) or the mobo. i'm sorry but there doesn't seem to be a bias to either. Share this post Link to post Share on other sites More sharing options...
MDSarcasm Posted May 7, 2006 Posted May 7, 2006 First of all, don't use generic RAM. It's just so stupid when you have a Opteron 144 and Ultra-D made for OC. Check the manual on how to properly use Dual Channel. Well, Im broke, so if you find a way to get $200 LMK! :nod: Im cheking out that thread now, thanks for the Info Share this post Link to post Share on other sites More sharing options...
Sharp Posted May 7, 2006 Posted May 7, 2006 Hello, Board will not work in the memory is in the 3rd slot. Board will not work in the memory is in the 4th slot. You can only use the 2 top slots. Mixing memory modules that are different sizes = not going to work. So everything is as it should be. Share this post Link to post Share on other sites More sharing options...
MDSarcasm Posted May 7, 2006 Posted May 7, 2006 Hello, Board will not work in the memory is in the 3rd slot. Board will not work in the memory is in the 4th slot. You can only use the 2 top slots. Mixing memory modules that are different sizes = not going to work. So everything is as it should be. I see where your coming from, but could you please explain: http://www.dfi-street.com/forum/showthread.php?p=478140 http://www.dfi-street.com/forum/showthread...06&page=3&pp=15 http://www.dfi-street.com/forum/showthread.php?t=52579 http://www.dfi-street.com/forum/showthread...77&page=3&pp=15 http://www.dfi-street.com/forum/showthread.php?t=52436 ... :confused: Share this post Link to post Share on other sites More sharing options...
seufari Posted May 7, 2006 Posted May 7, 2006 lol... I have posted in all of those threads... Here is my situation: Ram and processor worked fine in dual channel on other boards... Ram runs fine in single channel on Ultra-D with two different processors... Ram does not run fine in dual channel ( have tried two different processors) Some say it's an opteron problem and it may be, but their seem to be plenty of people with the exact same problem that have a64's. IDK Share this post Link to post Share on other sites More sharing options...
MDSarcasm Posted May 7, 2006 Posted May 7, 2006 Is there anone who has an Ultra-D and has their RAM in dual channel here? Share this post Link to post Share on other sites More sharing options...
supershanks Posted May 7, 2006 Posted May 7, 2006 Is there anone who has an Ultra-D and has their RAM in dual channel here? er yep at least 99% of users. i've run on ultra-D + SLI-DR with opteron. when u try to run in dual channel what settings are u using ?? Have you tried nudging up your memory volts to see if that gives any extra stability. Share this post Link to post Share on other sites More sharing options...
harris1986 Posted May 7, 2006 Posted May 7, 2006 http://www.dfi-street.com/forum/showthread...9893#post479893 check out my thread i found out why my comp was suffering the same problem as you! Share this post Link to post Share on other sites More sharing options...
Recommended Posts
Please sign in to comment
You will be able to leave a comment after signing in
Sign In Now