dling Posted April 18, 2006 Posted April 18, 2006 what could be the problem with my m/b when i connect just the 24 pin connector it starts running but when i add the 12v supply the red lights flash on then off and nothing happens :confused: Share this post Link to post Share on other sites More sharing options...
EdLSmith Posted April 18, 2006 Posted April 18, 2006 You have a 24 pin, an 8 pin and a 4 pin floppy connector. All connected? Your not connecting one connector at a time with power applied, are you? Share this post Link to post Share on other sites More sharing options...
dling Posted April 18, 2006 Posted April 18, 2006 You have a 24 pin, an 8 pin and a 4 pin floppy connector. All connected?Your not connecting one connector at a time with power applied, are you? i connect the 24 pin connector and the board (nb chip fan ) starts then i add w/power off the 12v 8 pin connector and restart ,but nothing. Share this post Link to post Share on other sites More sharing options...
fariss Posted April 18, 2006 Posted April 18, 2006 There are 3 power connections on the Expert. And your post does sound like you are connecting while power is applied. I hope that isn't the case. Share this post Link to post Share on other sites More sharing options...
dling Posted April 19, 2006 Posted April 19, 2006 There are 3 power connections on the Expert.And your post does sound like you are connecting while power is applied. I hope that isn't the case. so r u saying that if i connect olny the 24 pin connector it will start , but if i connect the 24 + the 8 pin it will not start w/o the third power connected ? :confused: that makes no sence, and yes power is off when connections r made Share this post Link to post Share on other sites More sharing options...
comgrif Posted April 19, 2006 Posted April 19, 2006 turn your system off. connect all the power connectors (the 24pin, 8 pin and floppy) then turn the system on. its kinda wierd having that floppy connection, but it is necessary Share this post Link to post Share on other sites More sharing options...
dling Posted April 20, 2006 Posted April 20, 2006 turn your system off. connect all the power connectors (the 24pin, 8 pin and floppy) then turn the system on. its kinda wierd having that floppy connection, but it is necessary trid it w/the same results, i think the board is dead Share this post Link to post Share on other sites More sharing options...
Recommended Posts
Please sign in to comment
You will be able to leave a comment after signing in
Sign In Now