steelballzz Posted March 29, 2006 Posted March 29, 2006 wel i run my sempron 307x9 24/7 i tested 385x8 without problems with old cpus might be a problem cause the memory controler is just to weak Share this post Link to post Share on other sites More sharing options...
e268 Posted March 29, 2006 Posted March 29, 2006 Enthusiast has AMD64 3000+ Venice, not a Sempron. Share this post Link to post Share on other sites More sharing options...
Enthusiast Posted March 29, 2006 Posted March 29, 2006 Thank u all for ur advises. .. Im gonna start to climb my way up to 2,8Ghz or that 2,7 (Again) Time is a issue for me, that i dont have it too much.. These settings i have had for a month (outoftheBOX) This is my second mb (K8N neo pla, first, burned) And a second CPU (NewCastle) So, smelling the smoke isnt the first time... GoodDay Gskill ZX test: http://www.xtremesystems.org/forums/showth...05&page=1&pp=25 bought before christmas Share this post Link to post Share on other sites More sharing options...
Skip04 Posted March 29, 2006 Posted March 29, 2006 I could be all wet here, but I am just going by what I have seen here that none I have seen has gone over 2600 on AMD64 3000+ That's pretty true for most newcastle 3000's, but the venice cores seem to clock higher with some work. Share this post Link to post Share on other sites More sharing options...
smolt Posted March 29, 2006 Posted March 29, 2006 Enthusiast has AMD64 3000+ Venice' date=' not a Sempron.[/quote']Doesent mater if its a E6 Enthusiast Im gonna start to climb my way up to 2,8Ghz or that 2,7 (Again) Time is a issue for me, that i dont have it too much.. These settings i have had for a month (outoftheBOX) This is my second mb (K8N neo pla, first, burned) And a second CPU (NewCastle) So, smelling the smoke isnt the first time... GoodDay Gskill ZX test: http://www.xtremesystems.org/forums/showth...05&page=1&pp=25 bought before christmas theres no need for smoke stay below 1.7 with that stock cooler and not much over sperts of 55c eather.theres a tread on uccc chips here if you get off them tight timings you can get 260 out of them but it dont mater one way or the other use a divider if you wont tight timings Share this post Link to post Share on other sites More sharing options...
e268 Posted March 29, 2006 Posted March 29, 2006 Enthusiast: do come back and let me know when you reach 2700 or 2800. I am just curious. Share this post Link to post Share on other sites More sharing options...
learners permit Posted March 30, 2006 Posted March 30, 2006 Quality cooling and power are two essentials when aiming high on clock. Share this post Link to post Share on other sites More sharing options...
Enthusiast Posted March 30, 2006 Posted March 30, 2006 Hello! MB seems to be the limit at the moment.. Settings when tested: Chipset: 1,8V~1,9V HT 3x~2,5 1,5V + 1,10%=1,65V (not tested much @1,7) any voltage sucs? (i have a row sheet for difr. multi..) @ 270x10=2,7GHz, mem 150/200x270= 202.5 (memtest 195Mhz) Prime stable. (tested 2hrs --> stabe for me) Tested from a UltimateBootcd.. But not stable when booted to BartPE bootable live windows. When started everest ultimate on it, crash.. Texsture corruption. I Have Seagate SATA 80 gig for windows (RAID) and a 160 PATA maxtor (RAID). Seagate is on port 3 (been in 4) Gskill: http://www.pureoverclock.com/article25-4.html http://www.xtremesystems.org/forums...05&page=1&pp=25 ..AquaGate is a watercooler.. All in one tough, but decent (delta ~5C) Share this post Link to post Share on other sites More sharing options...
smolt Posted March 30, 2006 Posted March 30, 2006 yeap its the MB Share this post Link to post Share on other sites More sharing options...
Enthusiast Posted March 30, 2006 Posted March 30, 2006 Any way to get around this? And i just dont get figured out my mem..? What ever "LOOSE" timings i try.. I get a total red line of errors in memtest 1.55 in the end of test 5.. Must be something with the mobo.. The rev. is A1 the first i think... Stockcooled mb... CASECOOLERS: 80mm on memory 120mm intake fan (aimed to mb chip&GPU) 120mm CPU/CASE fan (100CFM=100% & 100db sound :nod:) 120mm PSU fan Mb 40~50c cpu 37~42c Share this post Link to post Share on other sites More sharing options...
smolt Posted March 30, 2006 Posted March 30, 2006 Any way to get around this? And i just dont get figured out my mem..? What ever "LOOSE" timings i try.. I get a total red line of errors in memtest 1.55 in the end of test 5.. Must be something with the mobo.. The rev. is A1 the first i think... Stockcooled mb... CASECOOLERS: 80mm on memory 120mm intake fan (aimed to mb chip&GPU) 120mm CPU/CASE fan (100CFM=100% & 100db sound :nod:) 120mm PSU fan Mb 40~50c cpu 37~42c what are you trying to clock it at? and what divider are you useing? Share this post Link to post Share on other sites More sharing options...
Enthusiast Posted March 30, 2006 Posted March 30, 2006 E3 venice 3000, 10xstock multi Gskill mem MAX oc 216MHZ Aim ex. 2,7GHz or (2,8) FSB stability needed.. 260x10, mem @ 5/6 ~216MHz = stable, AGP 69-79 2,7 was yesterday stable in prime (booting cd) but NO go in windows Share this post Link to post Share on other sites More sharing options...
Recommended Posts
Please sign in to comment
You will be able to leave a comment after signing in
Sign In Now