Jump to content

nF4 Memory Advice (updated 14/11/06)


Sharp

Recommended Posts

  • Replies 768
  • Created
  • Last Reply

Top Posters In This Topic

Will the "Samsung PC3200 512MB DDR400 184PIN DIMM OEM " specically from http://www.ncix.com/products/index.php?sku=9545

be able to run well with the DFI? or is it just too "generic" to work? I've seen some people hit some high clocks with Samsung on DFI's.......maybe it's just luck?

 

They don't give any info on this module. Bad buy.

 

While Samsung doesn't make bad memory chips, there are a few problems here. If Samsung is the module vendor here, there is no guarantee that there are actually Samsung chips on the modules (although it is likely).

 

Also, even if they are Samsung chips, Samsung will sell the chips that test good to RAM vendors that make high-quality modules and leave those chips that are not special for those modules where nothing special is promised.

 

If you want cheap I would look for Geil Value or OCZ Performance (not OCZ Value).

Share this post


Link to post
Share on other sites

OK my current setup is in sig and i'm looking to jump to 2gigs of ram. this is where i get lost since i want my new ram to run close to or better than my current ram.

 

here are my current 2 choices let me know if i should be looking else where plz.

 

2GB Dual Channel Kit PN - OCZ4002048ELDCPE-K 2-3-2-5

 

or

 

2GB (2x1024) D/C Kit PN – OCZ5002048EBPE-K 3-3-2-8

 

its a big diffrence in price and potential performance so i want to make a good choice.

if there is a better choice that i am missing could someone point me to it.

 

Thanks in advance,

Buck

Share this post


Link to post
Share on other sites

Hello,

 

A PC4000 2x1GB kit will make better use of your CPU overclock than a PC3200 2x1GB kit.

 

But a 2x1GB kit is only better for applications/games that take a lot of memory.

 

If you are going to be benchmarking a 2x512MB kit will seem to be better due to the lower latencies.

 

If you want smooth gameplay for the latest games and quicker loading times the PC4000 2x1GB kit is the way to go.

Share this post


Link to post
Share on other sites

Hello,

 

A PC4000 2x1GB kit will make better use of your CPU overclock than a PC3200 2x1GB kit.

 

But a 2x1GB kit is only better for applications/games that take a lot of memory.

 

If you are going to be benchmarking a 2x512MB kit will seem to be better due to the lower latencies.

 

If you want smooth gameplay for the latest games and quicker loading times the PC4000 2x1GB kit is the way to go.

 

OK,

 

THANKS for the ast reply!!

 

I'm not to worried about benchmarks more concernd with my gaming performance (BF2, Q4, Farcry, F.E.A.R., etc...).

 

Is the OCZ the best choice here or should i be considering Ballistix possibly? both have a high price tag. i have seen a review of the OCZ @ AnandTech

have not spotted alot on much else out there.

 

Thanks again!!!

 

Buck

Share this post


Link to post
Share on other sites

2GB Dual Channel Kit PN - OCZ4002048ELDCPE-K 2-3-2-5

 

or

 

2GB (2x1024) D/C Kit PN – OCZ5002048EBPE-K 3-3-2-8

 

its a big diffrence in price and potential performance[...]

 

No there is not. In price, yes, but the difference in actual application performance when going from 200 MHz RAM to 250 MHz RAM is on the order of a single percent if you have an AMD64 around 2.5 GHz.

Share this post


Link to post
Share on other sites

i know these are not in the list up above but i want your opinion of these, and i am not oc my ram at all and i couldnt care less about tight timings

 

a guy name sunkenD (some of you might know him) reccomended me this stuff, cheap and works good he said, looks a lil hoaxy to me

 

www.sunkend.com is his site

 

Rosewill

 

http://www.newegg.com/Product/Product.asp?...N82E16820223030

 

geil value (worked fine in my last system) and i planned on these again

 

http://www.newegg.com/Product/Product.asp?...N82E16820144310

 

G.SKILL

 

http://www.newegg.com/Product/Product.asp?...N82E16820231012

 

pqi

 

http://www.newegg.com/Product/Product.asp?...N82E16820141152

 

basically im looking for 1gb around $100 , used is not a problem but no luck with that yet

Share this post


Link to post
Share on other sites


×
×
  • Create New...