GNU Posted July 6, 2005 Posted July 6, 2005 It's very interesting. My CPU is very bad. I got my system stable at 200x7 but not 200x10 or 200x9. I will try another tests. Share this post Link to post Share on other sites More sharing options...
GNU Posted July 7, 2005 Posted July 7, 2005 So i can't get 200x10 or 200x9 stable. CPU is broken. . Winnie. Share this post Link to post Share on other sites More sharing options...
Freezer26 Posted July 8, 2005 Posted July 8, 2005 I would say one of the 6/18 BIOS's for that CPU. Try default timings advertised on the RAM. I would also try everything at 2T until you can get that stable. I really think you don't have RAM timings even close to right. Like was said earlier, test everything 1 at a time. You think you've been testing a long time, ie. "days", I have been testing, like many of us here, since day 1. So pretty much for the last 4 months or so it has been test after test, format after format, believe me when I say, I know how you feel. Just start fresh, alot of those settings in BIOS when on Auto don't often help much, I would read/find sme settings that worked for someone else with your EXACT same memory and just try them, AFTER you set everything and run it in Memtest @ stock. Try testing each stick one by one. Try running with only 1 stick with no OC. Just gotta start from scratch.  Good Luck  -Freez Share this post Link to post Share on other sites More sharing options...
GNU Posted July 8, 2005 Posted July 8, 2005 I would say one of the 6/18 BIOS's for that CPU. Try default timings advertised on the RAM. I would also try everything at 2T until you can get that stable. I really think you don't have RAM timings even close to right. Like was said earlier, test everything 1 at a time. You think you've been testing a long time, ie. "days", I have been testing, like many of us here, since day 1. So pretty much for the last 4 months or so it has been test after test, format after format, believe me when I say, I know how you feel. Just start fresh, alot of those settings in BIOS when on Auto don't often help much, I would read/find sme settings that worked for someone else with your EXACT same memory and just try them, AFTER you set everything and run it in Memtest @ stock. Try testing each stick one by one. Try running with only 1 stick with no OC. Just gotta start from scratch. Good Luck  -Freez  Thank you for your advice. Is the Bios 618 final good and stable for my TCCD and CPU? If not so i downgrade it to 310P. 2T is a very good suggestion. I will test it. I have tested each stick and it runs perfectly. The problem is most of my older settings (like 2.4-3-4-10) passes Memtest without any errors and i can't find out the problem with windows. Most of the settings were copied by another members who said it runs stable (2.5-3-3-8, etc.). Memtest passed but windows gave a bad result. So i need exactly stable settings for my Ram without any "Auto" and it's very hard to find out the stable settings for windows. Share this post Link to post Share on other sites More sharing options...
GNU Posted July 10, 2005 Posted July 10, 2005 I got my system stable with a divider ! It was a bad choice but now i can't install windows without the divider (166) i want 200 but if i set DRAM:FSB to 200 i get bad BSODs. A big . for my system. Share this post Link to post Share on other sites More sharing options...
GNU Posted July 11, 2005 Posted July 11, 2005 Any suggestions about my problem? Share this post Link to post Share on other sites More sharing options...
GNU Posted July 11, 2005 Posted July 11, 2005 Push. I need help please i have too many problems with my system. I can't install windows on the IDE or SATA HDD. I got the same BSODs (ntfs.sys). What shall i do? It's maybe my Mobo? Anything goes wrong. Share this post Link to post Share on other sites More sharing options...
Freezer26 Posted July 11, 2005 Posted July 11, 2005 Push. I need help please i have too many problems with my system. I can't install windows on the IDE or SATA HDD. I got the same BSODs (ntfs.sys). What shall i do? It's maybe my Mobo? Anything goes wrong.   I would try to get 1 stick in 1st orange slot stable in memtest, then reinstall windows. Too many BSOD's can corrupt your Windoors install. Just try all the minimum requirements, 1 HD, vid card, CPU,and see how that goes. Good Luck  -Freez Share this post Link to post Share on other sites More sharing options...
GNU Posted July 12, 2005 Posted July 12, 2005 I would try to get 1 stick in 1st orange slot stable in memtest, then reinstall windows. Too many BSOD's can corrupt your Windoors install. Just try all the minimum requirements, 1 HD, vid card, CPU,and see how that goes.Good Luck  -Freez  Okay this is my last chance. Hope you are right. Thx. Share this post Link to post Share on other sites More sharing options...
GNU Posted July 14, 2005 Posted July 14, 2005 So i am back. Nothing runs. I took your suggestions with 1 HDD, ... and i can't find out the problem. My HDDs are sick? I tried with Fdisk and Fdisk can't find any partitions. I made some partitions with windows and paritition magic and fdisk couldn't find it! Memory is okay. I tried with one stick and memtest shows no errors. It's either Mobo or my sick HDD (SATA is 1 year old i can't believe it's broken). Need big help. Share this post Link to post Share on other sites More sharing options...
MinyAmoo Posted July 14, 2005 Posted July 14, 2005 Do you have all 4 sata controlers on and ide off? Share this post Link to post Share on other sites More sharing options...
GNU Posted July 14, 2005 Posted July 14, 2005 No SATA Port 1-2 off 3-4 on and ALL ide off? Not possible because i could not boot windows cd without ide. Do you mean HDD IDE? Share this post Link to post Share on other sites More sharing options...
Recommended Posts
Please sign in to comment
You will be able to leave a comment after signing in
Sign In Now