Ximo Posted June 18, 2003 Posted June 18, 2003 Hey guys..... my computer is dead it wont turn on anymore... compuyter starts but there is no boot "beep" and nothing appears in the screen. Everything seems working tho:the cd player opens, the fans work, the light on the mobo turn on, but nothing i tried to CMOS reset but nothing all this happend when i put all my bios settings back to the retail default, cuz the temps were kinda hight.... put everything to "optimal" (in the bios) (133, 15x, 6.50v, 7,3,3,3,2.5) F10 "save changes in CMOS: Y" enter... ... ... ...Nothing Wut should i do???? plz help me!!! Share this post Link to post Share on other sites More sharing options...
andrusk Posted June 18, 2003 Posted June 18, 2003 Have you tried to clear the cmos by removing the jumper and taking out the battery, a lot of times that remedies this problem. Its happened to me several times before when ive overclocked too much and removing the jumper and taking the battery out has always helped. If that doesnt work we see what else we can do p.s. sometimes you need to leave the battery and jumper out for a couple of hours for it to actually clear Share this post Link to post Share on other sites More sharing options...
mxrider623 Posted June 18, 2003 Posted June 18, 2003 i tried to CMOS reset but nothing you probably did it wrong because that will most likely fix it. Share this post Link to post Share on other sites More sharing options...
exeter_acres Posted June 18, 2003 Posted June 18, 2003 With my old board, it wouldn't reset until I removed the RAM, tried to reboot, and then re-installed it... bizarre Share this post Link to post Share on other sites More sharing options...
Some_Guy_ Posted June 18, 2003 Posted June 18, 2003 My board won't clear the CMOS until I unplug the Power Supply connector. This is also the behaviour of a board with its CMOS jumper on "clear". Share this post Link to post Share on other sites More sharing options...
GmAz Posted June 19, 2003 Posted June 19, 2003 I had that exact problem before. Everything turned on, but no beep..nothing. My Bios chip got fried somehow. Luckly it was still under warranty..got it replaced and it was fine. you might look into buying a new bios chip. Share this post Link to post Share on other sites More sharing options...
cyberpc04 Posted June 19, 2003 Posted June 19, 2003 yeah, thats happend to me too. Scared me to death. Just unplug the power cable from PSU, remove RAM, take out battery, and clear cmos. If it still doesn't work then you fried you bios. I fried mine once but it was under waranty. make sure you take out your memory though, it can hold a charge. Share this post Link to post Share on other sites More sharing options...
ViciousCycle74 Posted June 19, 2003 Posted June 19, 2003 I had that happen to me one time, and nothing worked untill I removed my TV tuner card, the system then booted with no problems, during the self test if there is a bad card on one of the buses you wont get the beep, and you will not be able to get in to the BIOS. Try one at a time removing your PCI cards, and even your AGP video card (if it's not integrated). If you get the beep you've found your problem. Share this post Link to post Share on other sites More sharing options...
andrusk Posted June 20, 2003 Posted June 20, 2003 how bout an update dude. Did you get it to work? Share this post Link to post Share on other sites More sharing options...
Ximo Posted July 1, 2003 Posted July 1, 2003 sry guyz i left for a one week vacation and i had no working pc to update.... anywayz i tried everything but the i could not clear so i gave it to the computer store to check and i will know that problem in a couple of days....... thanx again Share this post Link to post Share on other sites More sharing options...
william488 Posted July 1, 2003 Posted July 1, 2003 i had one that would not do anything when i tried to get the cmos reset, had to finaly take out the battery, switch the jumper, and try and turn on the computer without the battery and the jumper still on reset it powered up for about a second then shut off, i then reset everything back and turned it on again, then my cmos was back to good as new. Share this post Link to post Share on other sites More sharing options...
Recommended Posts
Please sign in to comment
You will be able to leave a comment after signing in
Sign In Now