R*r Posted September 11, 2004 Posted September 11, 2004 @snake2k which voltage mod do u want to make?the vdimm or vdd?i do have some tut but it still in indonesian language...but i can do in english here if u want to.... i already tried to give the vdd more(2,4v!!!)but i cant post to windows with that voltage..maybe its time to have some water in my mobo....*not sure* because i think if i can post to windows with higher vdd voltage i can chae the fsb with clockgen...but i still cant...the highest i can get is 2,1v but i cant do super pi at 260 huf....i wonder why....? i cant figureit out whats the problem...so any help from u guys...? Share this post Link to post Share on other sites More sharing options...
snake2k Posted September 12, 2004 Posted September 12, 2004 Hi. I only want to do a VDimm-mod., because I only want to set the FSB to 220 or 225 MHz. I think the 1,8V VDD is ok for that. If you could translate it, I would be very happy. Share this post Link to post Share on other sites More sharing options...
R*r Posted September 12, 2004 Posted September 12, 2004 @snake2k you can put a new resistance in R331,nut make sure you connect it on the lower side of the resistance not upper,lower is near to the sb... R331 - [new resistance] - Ground why i connect to R331 because it was the extention from pin1 of sc2616, it was the voltage regulator for the vdimm...since the 1st pin of sc2616 is to small to be ....?(what do u call it in english?weld?)so i have to find other way to connect the resistance... u can use a trimmer also within the range of 50k, but i rather use fix R but its up to you :shake: i find out the increasement were 60k + 0,2 32k + 0,3 27k + 0,41 22,2k + 0,55 12k + 0,8v :nod: so example....i use the 12k R....when i set 2,8v vdimm in bios it will +0,8v its equal to 3,6v:cool: just lower the resistance for more voltage... fell free to ask Share this post Link to post Share on other sites More sharing options...
snake2k Posted September 12, 2004 Posted September 12, 2004 Thank you! Tomorrow I'll get the resistance of 32k. I hope it will work. Share this post Link to post Share on other sites More sharing options...
R*r Posted September 17, 2004 Posted September 17, 2004 i have a problem to run prime96 above 6h59m heres the setting: ultra-al sempron 250*9 bh5 2-2-2-11 the voltage were: vcore/vagp/vdd/vdimm 1,8/1,8/2/3,3 came stable up to 6h59m,it stop couse of 1error 1,8/1,8/2/3,4 only 12m 1,825/1,8/2/3,3 1m 1,8/1,8/2,1/3,3 4m huf im really confuse about this prime thing....:confused: need some sugessstion....anything that comes in mind...thankyou @snake2k hows the mod going on?sucessfull or u blow it :nod: but i hope u done it well:rolleyes: Share this post Link to post Share on other sites More sharing options...
snake2k Posted September 17, 2004 Posted September 17, 2004 I haven't had much time. But it will come. Such highs settings as you I don't want to use ever. Share this post Link to post Share on other sites More sharing options...
Guest zerocash Posted September 17, 2004 Posted September 17, 2004 @R*r Loosen memory timings or better cooling. Share this post Link to post Share on other sites More sharing options...
R*r Posted September 17, 2004 Posted September 17, 2004 @snake2k come on push a little bit more:D i dont think my setup were high enough,some people can do more than mine.... @zerocash but i like my timing....huf then i mush make my pc cooler.... *i wonder what should i change now....hhhmmm* but i still dont want to use water...to much complicated for my room....:nod: ill try something...something....something....:confused: Share this post Link to post Share on other sites More sharing options...
R*r Posted November 21, 2004 Posted November 21, 2004 ok 260fsb at last... http://img41.exs.cx/img41/1636/9748.jpg i know its quite a time since the last post(got problem wth inet conecction) but i just want to give courage to other that ultra-al also have the potential to reach high fsb Share this post Link to post Share on other sites More sharing options...
snake2k Posted November 22, 2004 Posted November 22, 2004 At this moment my Board is not functional. I helped someone with a dead bios - now mine is dead. But today I will flash the chip. I hope it works. PS: Nice picture. Share this post Link to post Share on other sites More sharing options...
R*r Posted November 22, 2004 Posted November 22, 2004 hope u will do well on flashing the chip n could perform much better thanks,now i will tried to reach 270 hehehe i wonder if it possible? Share this post Link to post Share on other sites More sharing options...
snake2k Posted November 22, 2004 Posted November 22, 2004 Hi. Mission accomplished, CHIP is working. But I'm only at 220 MHz FSB now. Without several mods I won't come further - but I don't have much time. At first I'm happy about my new old board. *g* Share this post Link to post Share on other sites More sharing options...
Recommended Posts
Please sign in to comment
You will be able to leave a comment after signing in
Sign In Now