nightsider Posted October 18, 2007 Posted October 18, 2007 Hi i was wondering if i could take one of these cables and replace the male connectors with the female RAC jacks if so how would i wire them? Share this post Link to post Share on other sites More sharing options...
RimX Posted October 18, 2007 Posted October 18, 2007 just get one of these http://www.zzounds.com/item--HOSYRA154 Share this post Link to post Share on other sites More sharing options...
Verran Posted October 18, 2007 Posted October 18, 2007 Or just pick up a couple RCA barrel connectors like at the bottom of this page. You can find them at Radio Shack and places like that. Share this post Link to post Share on other sites More sharing options...
hardnrg Posted October 18, 2007 Posted October 18, 2007 since you're in the UK, one of the "places like that" is Maplin http://www.maplin.co.uk/Module.aspx?TabID=...2&doy=18m10 there are gold plated ones and nickel plated ones, in single, double and triple... Maplin also does in-line female phono connectors in nickel and gold plated... you wire the signal wire to the centre solder point, and the braided shield to the outer solder point... the same as you would for a male phono connector: http://www.overclockersclub.com/guides/pc_...erconnect/5.htm Share this post Link to post Share on other sites More sharing options...
nightsider Posted October 18, 2007 Posted October 18, 2007 basically i need to make the left and right chanels merge into one headphone style jack Share this post Link to post Share on other sites More sharing options...
hardnrg Posted October 18, 2007 Posted October 18, 2007 what are you connecting? you could use this: http://www.maplin.co.uk/Module.aspx?TabID=...6&doy=18m10 or this: http://www.maplin.co.uk/Module.aspx?TabID=...6&doy=18m10 or this: http://www.maplin.co.uk/Module.aspx?TabID=...2&doy=18m10 Share this post Link to post Share on other sites More sharing options...
nightsider Posted October 19, 2007 Posted October 19, 2007 my folks tv only has the component sockets for video checked the manual and i need to have the audio going into the headphone style jack so i can use my xbox 360 in hd on their tv i get the hd picture but no sound since it only has the headphone style jack Share this post Link to post Share on other sites More sharing options...
BoyBandsMustDie Posted October 19, 2007 Posted October 19, 2007 +1 for just buying some barrels (from above) so it would go like this..... Where the Green is what you have now Blue = barrels you need Red = Xbox audio cables At least thats how my xbox is hooked up to my monitor P.S. (sorry for the shotty quality... woohoo for webcams) Share this post Link to post Share on other sites More sharing options...
hardnrg Posted October 20, 2007 Posted October 20, 2007 use this: http://www.maplin.co.uk/Module.aspx?TabID=...6&doy=18m10 or this: http://www.maplin.co.uk/Module.aspx?TabID=...6&doy=18m10 red and white phono from xbox, to either of those adapters, 3.5mm stereo into TV, easy Share this post Link to post Share on other sites More sharing options...
Recommended Posts
Please sign in to comment
You will be able to leave a comment after signing in
Sign In Now