Phil Posted December 29, 2012 Posted December 29, 2012 Any electricians here? I'm trying to hook up a piece of electric baseboard heat and I'm stumped. The tag says it's 240 volts, but there's only one wire. Is it just not usable for a single unit with a 240V supply, or is there a way to hook this up? Both ends are essentially the same. Thanks. Share this post Link to post Share on other sites More sharing options...
Kamikaze_Badger Posted December 29, 2012 Posted December 29, 2012 (edited) My step-dad's an electrician, I'll ask him. Are you saying it only has a plugin for a 120v outlet? Or are you talking about just the one wire going to the heating element? Update: You should have three wires, generally a black, white, and bare ground wire. Does the wire there strip out into three? You need to have two hots and a ground going into the element he said, I think on either side. That's about all he can do without being there in person . Edited December 29, 2012 by Kamikaze_Badger Share this post Link to post Share on other sites More sharing options...
Phil Posted December 29, 2012 Posted December 29, 2012 Thanks. No to all the above, just the single wire in there. Share this post Link to post Share on other sites More sharing options...
Black64 Posted December 29, 2012 Posted December 29, 2012 Could another wire or plug have rusted/broken off? From the pic it looks very likely. Or maybe is it on the other side? Share this post Link to post Share on other sites More sharing options...
Phil Posted December 29, 2012 Posted December 29, 2012 No both sides are the same. Nothing rusted off. Share this post Link to post Share on other sites More sharing options...
Renigade Posted December 30, 2012 Posted December 30, 2012 (edited) where did you get this? your missing a wire dude. you need 2 connections and there should be a ground screw to the chassis. Also you need some kind of control (Thermostatic) This thing appears to be Old and Broken which=fire hazard. The one wire you have left looks like is 20+ years old. Does not look safe even with an Electrician to guide you through your repairs and set up. You don't need no stinking heater! just set up another folding machine and snuggle up to it and watch it fold ! Edited December 30, 2012 by Renigade Share this post Link to post Share on other sites More sharing options...
Phil Posted December 30, 2012 Posted December 30, 2012 I think I have my answer, cut the single wire to create 2 ends, one for each leg of the 220. There is a ground lug. The unit is a little cosmetically challenged from sitting in my shop for 30 years, but it has never been used. An air dusting inside, some steel wool and spray paint outside, I should be good to go. If i was worried about 30 year old wires, I'd have to rewire my whole house, lol. Share this post Link to post Share on other sites More sharing options...
ivangela Posted December 30, 2012 Posted December 30, 2012 First let me state that I am NOT an electrician. BUT my brother is and he taught me enough for my personal use and since I have wired over 3000 feet of wire in my house, a sub panel, receptacles, switches, lights, etc and I have NEVER encountered anything with only 1 wire. Electricity flows in a circuit which by definition needs a wire to enter and a wire to leave. Some old school electricians did something called "breaking the neutral" where they carried load on the white (neutral) wire but that is no longer acceptable as it charges your neutrals & at the panel also. So, like a previous poster said, there has to be another wire somewhere. Your house will have a wire with at least 3 wires in it, a black, white, and bare copper. For a 240volt you should use 12/3 to supply the electricty and it will have 4 wires in it: black, red, white, and bare copper. The black and the red supply the juice and the white is the neutral with the bare the ground. Not sure what you mean by cutting the one wire to hook it up to the two legs of the 240. Do you mean to splice a pigtail to the one wire you have, giving you 2 and then hooking those up to the heater? Whatever you do, it sounds like a wire is broken off somewhere. From looking at the pic, tothe left of the black wire is asmall tan nub that looks like the paper that typically wraps a wire. Is that another wire, just broken off so you can't see it? Also the plug I see is also NOT a 240 volt plug. They look different. Not much help I'm afraid! Good luck, not sure the folding option will help enough, lol Share this post Link to post Share on other sites More sharing options...
phil69 Posted December 30, 2012 Posted December 30, 2012 I would google the model number and try to get a wiring diagram so you can make it to your 58 birthday. Phil Share this post Link to post Share on other sites More sharing options...
Waco Posted December 30, 2012 Posted December 30, 2012 That looks like a 120v plug to me...wiring to 240 needs 3 wires anyway right (2 hots and a neutral)? Share this post Link to post Share on other sites More sharing options...
SpikeSoprano Posted December 30, 2012 Posted December 30, 2012 I've done enough wiring to know if you try to hot wire that unit #1=your fire insurance had better be paid up and #2= your life insurance had better include death by electrocution. Share this post Link to post Share on other sites More sharing options...
Phil Posted December 30, 2012 Posted December 30, 2012 LOL, the plug in the picture is for the table saw the heater is sitting on. There are no other wires, apparently cutting the one in the middle gives 2 leads to hook on to. I tried Googling the part #, no joy from teh internets. Share this post Link to post Share on other sites More sharing options...
Recommended Posts
Please sign in to comment
You will be able to leave a comment after signing in
Sign In Now